Author Topic: 2017 New Old Stuff setup (Read 126964 times)

ndotcom · « **Reply #660 on:** Jan 23, 2017 at 07:49 PM »

My 1st turntable is having a make over.

The Thorens TD 160 MKII I acquired early to mid 2000's. Sana maganda kalabasan at match yung arm sa table.

Gawa muna arm plate/board para magsakto yung arm.

Test fit muna yung arm plate, okay naman as per measurements.

Abangan nalang muna at tuloy pa gawa....

audiojunkie · « **Reply #661 on:** Jan 24, 2017 at 12:27 AM »

Gandang project yan bro....

Ka abang-abang talaga yan....

ndotcom · « **Reply #662 on:** Feb 16, 2017 at 10:25 AM »

Try lang, habang di pa tapos TD160 make over.

redstarrising · « **Reply #663 on:** Feb 16, 2017 at 01:33 PM »

ayos bro , cantilever type

, nice toneram

ndotcom · « **Reply #664 on:** Feb 16, 2017 at 06:09 PM »

Heto katatapos lang, lagyan ko later seguro ng spindle but on its own usable naman na sya.

My high end RCM verison 1

Lazy susan bearing assembly gamit ko then wood plate, later try ko tiles/acrylic or anything waterproof. Ultimate goal kasi disc washer talaga at pwede sa lababo gamitin.

Test run ok naman, need ko mas mabigat na base.

audiojunkie · « **Reply #665 on:** Feb 17, 2017 at 01:01 AM »

Nice work bro..

ndotcom · « **Reply #666 on:** Feb 17, 2017 at 06:09 AM »

Quote from: audiojunkie on Feb 17, 2017 at 01:01 AM

Nice work bro..

Thanks bro. Dami pa pending na gawa dito.

tony · « **Reply #667 on:** Feb 17, 2017 at 07:35 AM »

musta na yung 2A3 mo?

redstarrising · « **Reply #668 on:** Feb 17, 2017 at 11:21 AM »

asan na yun fiber ko na pending na rin yun gawa waiting ko yan item

wow RCM ganda naman , ano kaya lagyan mo ng malabanan suction system

jjlovemusic · « **Reply #669 on:** Feb 17, 2017 at 11:29 AM »

Ang gaganda ng DiY niyo, inggit much...

Pag ako nagd-Diy, madalas kasi Destroy-It-Yourself nangyayari. huhu

ndotcom · « **Reply #670 on:** Feb 17, 2017 at 07:34 PM »

Quote from: tony on Feb 17, 2017 at 07:35 AM

musta na yung 2A3 mo?

Sir Tony nakapila na yun malamang March or summer na.

Quote from: redstarrising on Feb 17, 2017 at 11:21 AM

asan na yun fiber ko na pending na rin yun gawa waiting ko yan item

wow RCM ganda naman , ano kaya lagyan mo ng malabanan suction system

Di pa ko nakakalabas eh, next week seguro kasi tapos na Valentines di na matao sa Dangwa hehehe, pede na kita mapuntahan. May dremel or mini saw ka dyan pang putol ng stainless na 2mm rod?

ndotcom · « **Reply #671 on:** Feb 17, 2017 at 07:40 PM »

Quote from: JJLoveMusic on Feb 17, 2017 at 11:29 AM

Ang gaganda ng DiY niyo, inggit much...

Pag ako nagd-Diy, madalas kasi Destroy-It-Yourself nangyayari. huhu

Naku bro pag may mahaba ka time na nasa bahay lang talagang sa DIY palipas oras mo. Dapat dito di ka pikon sa sarili mo

at sa umpisa taas ng expectations mo sa srili mo so malimit di ka satisfied sa gawa mo

Patience is the key! Huwag magmadali.

ndotcom · « **Reply #672 on:** Feb 17, 2017 at 07:53 PM »

My white pearl take of the GL75, malapit na matapos.....

shoktongxxx · « **Reply #673 on:** Feb 17, 2017 at 11:20 PM »

Quote from: ndotcom on Feb 17, 2017 at 07:53 PM

My white pearl take of the GL75, malapit na matapos.....

ganda sir.

tony · « **Reply #674 on:** Feb 18, 2017 at 11:38 AM »

if you need help, you know where to find me,
also working on the traffos for your darling amp....

Quote from: ndotcom on Feb 17, 2017 at 07:34 PM

Sir Tony nakapila na yun malamang March or summer na.

Di pa ko nakakalabas eh, next week seguro kasi tapos na Valentines di na matao sa Dangwa hehehe, pede na kita mapuntahan. May dremel or mini saw ka dyan pang putol ng stainless na 2mm rod?

ndotcom · « **Reply #675 on:** Feb 19, 2017 at 08:09 PM »

Quote from: tony on Feb 18, 2017 at 11:38 AM

if you need help, you know where to find me,
also working on the traffos for your darling amp....

Thanks sir Tony. Excited na rin ako sa Darling amp na yan. Will visit you as soon as ready na traffos.

ndotcom · « **Reply #676 on:** Feb 20, 2017 at 05:15 PM »

Test fit to the plinth for the GL75.

Carbon fiber wand substitute for the corroded old one.

Haayyy so much work done and still pending.....

redstarrising · « **Reply #677 on:** Feb 21, 2017 at 09:21 PM »

ayos ganda na

ndotcom · « **Reply #678 on:** Jun 27, 2017 at 05:08 PM »

Quote from: ndotcom on Dec 11, 2016 at 06:12 AM

Bose 901 series II

This speakers was sprayed black at metal mesh grills ang gamit, all drivers are okay and tested without the equalizer okay din. Now time to restore the color and shine I like.

After stripsol and 5 grit sanding by hand(wishlist electric sander)

Walnut stain and finish in 1 application by brush

Next pa yung grills and equalizer if kaya pa refurbish.

Finally natapos na rin ito. Natagalan sa EQ repairs/refurb

Wala din makita classic na speaker grill cloth to match the old 901 Series 2 so got the common Black color.

The Left

The Right

ndotcom · « **Reply #679 on:** Jun 27, 2017 at 05:23 PM »

My just finished "Darling SET Amp".

It utilizes 12SL7 driver for the 1626 tube, with transformers by sir TonyT.
Rated just a mere 0.75Watt of power so this needs an above 90dB speakers. Its a joy to build with so little parts.

Power up and testing. Used my Harbeth speakers and still sound good to my ears.

Now with the proper plinth.

parasound · « **Reply #680 on:** Jun 27, 2017 at 06:13 PM »

Wow.. very nice

Sent from my iPhone using Tapatalk

RXV · « **Reply #681 on:** Jun 27, 2017 at 07:26 PM »

Quote from: ndotcom on Jun 27, 2017 at 05:08 PM

Finally natapos na rin ito. Natagalan sa EQ repairs/refurb

Wala din makita classic na speaker grill cloth to match the old 901 Series 2 so got the common Black color.

The Left

The Right

Nice wood stain and restoration

mbtorn · « **Reply #682 on:** Jun 27, 2017 at 07:31 PM »

Quote from: ndotcom on Jun 27, 2017 at 05:08 PM

Finally natapos na rin ito. Natagalan sa EQ repairs/refurb

Wala din makita classic na speaker grill cloth to match the old 901 Series 2 so got the common Black color.

The Left

The Right

Great Work!

shoktongxxx · « **Reply #683 on:** Jun 27, 2017 at 09:17 PM »

ang kintab ah.

banesto · « **Reply #684 on:** Jun 28, 2017 at 08:10 AM »

Magaling!

tony · « **Reply #685 on:** Jun 28, 2017 at 08:35 AM »

Quote from: ndotcom on Jun 27, 2017 at 05:23 PM

My just finished "Darling SET Amp".

It utilizes 12SL7 driver for the 1626 tube, with transformers by sir TonyT.
Rated just a mere 0.75Watt of power so this needs an above 90dB speakers. Its a joy to build with so little parts.

Power up and testing. Used my Harbeth speakers and still sound good to my ears.

Now with the proper plinth.

good job Norman....

ndotcom · « **Reply #686 on:** Jun 28, 2017 at 10:07 AM »

Thank you mga sir! Sana more to come....

redstarrising · « **Reply #687 on:** Jun 29, 2017 at 12:12 PM »

Good job!!!

at_sunset_blvd · « **Reply #688 on:** Jun 29, 2017 at 07:43 PM »

Neatly Done, Congratz!

ndotcom · « **Reply #689 on:** Jul 06, 2017 at 07:32 AM »

Quote from: redstarrising on Jun 29, 2017 at 12:12 PM

Good job!!!

Thanks brader, heto na sinasabi ko sayo Aikido project..

Quote from: at_sunset_blvd on Jun 29, 2017 at 07:43 PM

Neatly Done, Congratz!

Thank you sir!