Author Topic: Optoma HD33 (1800 ANSI Lumens, 1080p, True 3D, DLP) (Read 35854 times)

Weng! · « **Reply #120 on:** Mar 14, 2016 at 08:23 PM »

Quote from: Allan_2180 on Mar 14, 2016 at 05:57 PM

According to specs, HD33 projection lamp is rated to last up to 4000 hours in standard mode or 3000 hours in bright mode* (Pero may fine print)
*Lamp life is dependent on many factors, including lamp mode, display mode, usage, environmental conditions and more.

my settings is always on standard mode kaya pala di pa kalahati ang lamp hour bar. lately puro xbox ginagamit ng hd33 ko. gaming marathon pa pag weekend

i'm happy with the black level but maybe this filter will make it better pa. how long was the shipping from ebay and did the seller send it via post office?

Allan_2180 · « **Reply #121 on:** Mar 14, 2016 at 08:49 PM »

Sa living room kasi setup ko and white ceiling at beige wall kya malakas reflections sa screen lalo na pag bright scenes, na-research ko na ND 2 Filter should help, nahirapan lang ako maghanap ng 72mm na cheap yet made of GLASS ND Filter karamihan kasi resin or plastic made which is OK for cameras but bad for PJ's.
In 16 days lang nasa akin na item.
Seller is from UK they send it via Royal Mail Airmail.
Will try to post my comparison soon.

Weng! · « **Reply #122 on:** Apr 13, 2016 at 11:29 AM »

HELP!!!

bigla lang ayaw mag ON ang HD33 ko. hindi na umiilaw ang power led light sa likod. checked the AC outlet, gumagana naman. naglalaro pa ng xbox ang anak ko kagabi.

what do you think is wrong with my unit?

Allan_2180 · « **Reply #123 on:** Apr 14, 2016 at 08:57 AM »

Kung totally dead na unit mo (NO standby led indicator) possible na due to power surge yan. And hindi ganun kadali idisassemble HD33 to look for or replace burned parts in power board. Better bring it to your nearest JBL/Harman Kardon store but you have to pay for add'l pickup service fee or you can bring it directly to Beyond Innovations, Inc. in Libis QC.

Weng! · « **Reply #124 on:** Apr 14, 2016 at 10:05 AM »

Quote from: Allan_2180 on Apr 14, 2016 at 08:57 AM

Kung totally dead na unit mo (NO standby led indicator) possible na due to power surge yan. And hindi ganun kadali idisassemble HD33 to look for or replace burned parts in power board. Better bring it to your nearest JBL/Harman Kardon store but you have to pay for add'l pickup service fee or you can bring it directly to Beyond Innovations, Inc. in Libis QC.

correct, no led indicator na siya. kaka inis lang kasi gumana naman the night before pero pagamit kinabukasan ayaw na mag on.

will search the contacts of beyond innovations sa net. i'm from leyte so i have to send the PJ to them by courier

thanks

Weng! · « **Reply #125 on:** Apr 16, 2016 at 10:19 AM »

is there any fuse in the unit that may have popped out?

Allan_2180 · « **Reply #126 on:** Apr 16, 2016 at 12:49 PM »

Quote from: Weng! on Apr 16, 2016 at 10:19 AM

is there any fuse in the unit that may have popped out?

Na-contact nyo na po ba service center d2 sa Manila?
Not sure kung may nakita ako na Fuse sa Power Board...
Bka ksi 0-ohm Resistor type or ceramic type(non user replaceable) naka mount dun, nsa pinakailalim ksi power board madami pa kakalasin bgo un maexpose.
Bka pde mo na din pacheck sa local electronics service center jan sa Leyte or try mo i-DIY research ka ng service manual ng HD33 sa net may step by step instructions dun how to dismantle the unit.

Allan_2180 · « **Reply #127 on:** Apr 16, 2016 at 04:27 PM »

Found images of LVPS Power Supply:
Possible na sa primary side ng board ang sira(left side), may solder-in fuse na nkaheat shrink tubing rated 8A/250V, and hindi cya user replaceable, bka sa local electronics service center i-DIY nla fuse replacement, pag sa service center possible na buong LVPS Power Supply Board papalitan nila, if you can DIY bumili ka ng solder-in fuse(google it for image) or pag hindi naman nasira fuse you contact optoma USA for HD33 LVPS and JAC for shipping. For price estimate sa eBay nsa around 1.5T to 2T price nya. Inquire ka din ng mga repair estimates pra malaman saan mas makakamura at makakasigurado.

Weng! · « **Reply #128 on:** Apr 19, 2016 at 07:38 AM »

hi allan,

maraming salamat sa pag share mo sa possible damaged part ng hd33 ko. nag message ako sa beyond innovation sa fb pero malabo ang sagot, tatawagan ko nalang sila later.

magandang idea ang bumili ng power board sa US, maka mura at mabilis pa. pero problema ko paano malaman na yon ang sira. hanap muna ako service center techs dito na may alam sa mga ganito'ng issue ng appliance.

salamat uli bro

Weng! · « **Reply #129 on:** Apr 19, 2016 at 09:17 AM »

Makapal na pala ang alikabok sa fan filter.di ko pa na linisan ever since. Isa kaya ito sa cause sa pagkasira ng power supply? Paano pala linisin,may quick opening ba sa case na accessible ang filter?

Allan_2180 · « **Reply #130 on:** Apr 19, 2016 at 01:29 PM »

Quote from: Weng! on Apr 19, 2016 at 09:17 AM

Makapal na pala ang alikabok sa fan filter.di ko pa na linisan ever since. Isa kaya ito sa cause sa pagkasira ng power supply? Paano pala linisin,may quick opening ba sa case na accessible ang filter?

Dahil sa init ng panahon ngaun mas prone sa overheating mga appliance natin. No other way to clean HD33's side mesh but to open the unit, pde mo din i blower pro pag hindi umaandar ang fan bka mas kumalat lang sa loob ung dust particles at bka makapasok sa colorwheel assy papunta sa lens at magka dust blobs ka pa... npakahirap din linisin ng lens, ginamitan ko pa sa akin ng DSLR Lens cleaner. basta pag OK ang fuse e i-replace mo na lang buong powerboard kc baka umabot na sa regulator IC's at transformers ang damage(usually kasi may thermal fuse mga transformers pwede ito ma-bypass pero delikado pg nagoverheat uli).
If ur local service center can dismantle HD33, bka pde ikaw na lang umorder ng ASSY 80W LVPS FOR EX76 sa Optoma USA+JAC, then ipakabit mo sa local service center. At least cleaning at service fee na lang babayaran mo.

Weng! · « **Reply #131 on:** Apr 19, 2016 at 07:47 PM »

Wala yata service center dito sa amin na marunong sa optoma pj. Is beyond innovation the only authorized optoma service center? Do they supply the parts or they allow us to buy theb they will only charge the labor cost?

Allan_2180 · « **Reply #132 on:** Apr 20, 2016 at 07:28 PM »

Quote from: Weng! on Apr 19, 2016 at 07:47 PM

Wala yata service center dito sa amin na marunong sa optoma pj. Is beyond innovation the only authorized optoma service center? Do they supply the parts or they allow us to buy theb they will only charge the labor cost?

As of now Beyond Innov is the only authorized distributor and service center of Optoma in PH... and wala pa kc ako experience magparepair sa kanila since hindi natuloy yung repair ng HD33 ko sa kanila. Will PM to you my previous Beyond Innov contact person...

Weng! · « **Reply #133 on:** Apr 21, 2016 at 09:01 AM »

Quote from: Allan_2180 on Apr 20, 2016 at 07:28 PM

As of now Beyond Innov is the only authorized distributor and service center of Optoma in PH... and wala pa kc ako experience magparepair sa kanila since hindi natuloy yung repair ng HD33 ko sa kanila. Will PM to you my previous Beyond Innov contact person...

sige sir will call that person asap para matanong man lang kung may pag-asa o gaano katagal bago ma repair

Allan_2180 · « **Reply #134 on:** Jul 11, 2016 at 01:28 AM »

Update lang sa paginstall ko ng ND filter...

The result is that ND2 crushed the blacks too much...
also the image had a greenish tinge kya need to change the RGB Gain and have to set the lamp to "Bright" setting to increase the brightness a bit higher.

I think its not ideal for my livingroom setup...
But maybe good for a really dark man cave setup.

Weng! · « **Reply #135 on:** Mar 13, 2017 at 11:25 PM »

due to my busy sched, i have not sent in my hd33 for repair and it's almost a year now since it conked out.

kanina wala akong magawa tinanggal ko ang bulb. may umiingay sa bulb housing at nakita ko na natanggal ang ceramic part ng bulb. ito kaya ang dahilan kaya ayaw na mag power ON? last time i've checked, nasa 1800 hrs pa lang ang bulb using econo mode all the time. pero last summer halos buong araw ginagamit ang hd33 na nakakabit sa xbox360.

sana wala ng ibang problema ang unit. umorder na ako ng osram bulb sa amazon, $59 lang.

ito pala pic ng housing at sirang bulb.

Allan_2180 · « **Reply #136 on:** Mar 21, 2017 at 07:22 AM »

Whoa! Its been a while na pala. Akala ko na-repair na hd33 mo. Well, pag lamp ang sira dapat may LED Indications pa rin sa unit...it really has something to do with the power board talaga pag totally dead unit. Yung natanggal sa bulb I think protection cap cya for the terminals it should work even without it. Well let's hope na lang it will work pagdating ng bulb.

Weng! · « **Reply #137 on:** Mar 22, 2017 at 10:30 AM »

got the new lamp last saturday, tyempo may umuwi na pinsa galing US. installed the bulb carefully sa housing but unfortunately ayaw pa rin mag ON ang unit. i called beyond innovation, sabi nila system check up will cost 3k. i'm afraid to send this in baka malaki ang aabutin pagpapalitan pa ng board. i'm from leyte so shipping thru LBC will cost 1.2k one way (that's what i paid 4 yrs ago pa).

i'm thinking of buying the BenQ W1070 which is on sale now sa amazon at $500. sa tingin ko mas sulit siguro ito kesa ipapagawa ko ang hd33. tama kaya ako?

Allan_2180 · « **Reply #138 on:** Mar 22, 2017 at 11:32 PM »

I think max. of 10T magiging gastos mo if iparepair mo yan sa Manila, powerboard should be around 2T, or bka onboard fuse lang papalitan nla jan dpende sa system check report nila.itatawag nmn nila yan bago i-go yan e. Pero in case magback-out ka ng pa-repair due to expensive parts you could still lose at least 6T
But you could still save a lot pag narepair yan compare s plan mo bumili ng $500 W1070, + shipping fee to leyte.
Well its up to you...both have risks din if budget is not the problem e buy new one na lang.
maganda din naman reviews ng W1070.

Weng! · « **Reply #139 on:** Mar 06, 2019 at 11:17 AM »

Finally, na repair ang hd33 ko after sitting for a year at Gakken Philippines. Na tyempo nasa manila ako when they called me na okay na kaya personal ko nakita ang pag demo ng technician. Paid 4.5k sa power board and 2.5k sa labor. However, nagloloko ang remote control, ayaw gumana ang ON button at may iba pa na hindi umiilaw. Kaya need e power ON sa unit mismo.

Baka meron sa inyo remote na hindi na ginagamit, bilhin ko

Excited to set this up in my unused home theater room

Allan_2180 · « **Reply #140 on:** Apr 04, 2019 at 02:52 PM »

wow its been a while since I last visited this site... congratulations on your hd33.
maybe your batteries leaked and damaged the circuit board of your remote. ebay is selling bnew remote for our HD33, it cost around $20.00 from China.

Weng! · « **Reply #141 on:** Sep 20, 2019 at 06:16 PM »

Quote from: Allan_2180 on Apr 04, 2019 at 02:52 PM

wow its been a while since I last visited this site... congratulations on your hd33.
maybe your batteries leaked and damaged the circuit board of your remote. ebay is selling bnew remote for our HD33, it cost around $20.00 from China.

i have stumbled on this thread and saw your reply. bought a replacement remote from amazon for $22 at pina ship ko direct sa pinas. the remote is not original optoma but it does the job. the quality is not like the orig, the plastic is very cheap and no backlight. anyway, i only use the power button.