Topic: Edifier R1280T active speakers + Edifier X600 possible????

[zereque]

Hi pinoydvd,

Ask ko lang, pwede kayang gamitin ang (bass only) ng Edifier International X600 sa Edifier R1280T active speakers?

ito specs nila :

Studio 1280T

Total power output: 21W x 2
SNR: ≥85dBA
Input sensitivity: 750mV ± 50mV
Distortion: ≤0.05%
Subwoofer / bass unit: 4 inch (106mm), 6Ω
Tweeter unit: Φ13mm silk domed tweeter, 4Ω
Weight: 4.9Kg Net | 5.65Kg Gross
Dimension: 146mm x 234mm x 196mm (WxHxD)



X600

Total Power Output：RMS 10W x 2 + 20W x 1
SNR：>=85dBA
THD + N：10%
Frequency response：Satellites: 190Hz - 20KHz | Subwoofer: 20Hz - 170Hz
Input Sensitivity：Satellites: 420mV ± 50mV | Subwoofer: 60mV ± 10mV
Input impedance：10KΩ
Subwoofer / bass unit：7 inch aluminum Coil, 4Ω Midrange / high unit:：3 inch paper cone, 4Ω
Tweeter unit:¾ inch (20mm) PV membrane dome Dimensions:：
Satellites: 241mm x 229mm x 279mm |
Subwoofer: 91mm x 202mm x 141mm (WxHxD)
Weight:：≈7.30Kg (gross)

At paano po ang magiging connection nya if possible?

Thanks and more power 

[Gino]

You will split your source cable into stereo RCA for the 1280 and into 1/8 jack for the X600. Wait and see if you can match the levels of the 1280 and the X600. Most likely you can. What you can't do is change the sub's xover point. It is fixed.