Author Topic: Yamaha Service Center (Read 49785 times)

Clondalkin · « **Reply #60 on:** Dec 12, 2011 at 10:20 AM »

H E L P!

Can someone recommend a good repair shop for AVR other than Audioworld?

Wife informed that our AX1 suddenly wouldn't power on - hanggang TIK TIK sound lang but ayaw tumuloy. She called Audioworld today and was informed that 2-3 months daw ang repair period - WHAT? they haven't even diagnosed the unit and my wife told me that she used to be able to fix that by simply supporting the power cable. Panic button ang wife because walang mapatugtugan ng Xmas Carols.

We used to go to that electronic repair shop in Virra Mall (2nd or 3rd floor) but I wonder if it's still there. Anyways, any information would help. Perhaps a member actually does repair. Regards!

audioworld · « **Reply #61 on:** Dec 12, 2011 at 10:44 AM »

Dear Sir, with regards to your HELP!!!!!!!! 2 to 3 months is the WAITING period for diagnosed units with no AVAILABLE parts .
We need to order the ORIGINAL parts for each diagnosed unit.
We give priority to those customers that reside in provinces or not within the metro.
Checking units for trouble might take 2 to 3 days , and not 2 to 3 months.
Maybe it's just that talking or conversing over the phone might cause some misunderstanding over details.
Hope that you still consider Audioworld for your repair service center.

titor · « **Reply #62 on:** Apr 09, 2013 at 03:14 PM »

Sorry if i had to resurrect this thread. Aside from Audioworld is there any other shops that can work on a receiver that was accidentally plugged sa 220. Preferably Makati or neighboring areas. I got this unit in the US so there's no warranty na. And nasa shop pa ang kotse for the next week at least. I think it will cost a lot to take a cab only to find out its just a busted fuse. (ceramic fuse so aside from visually inspecting it i dont have any knowledge how to check)

cm8 · « **Reply #63 on:** Dec 11, 2013 at 11:14 AM »

Hi Sirs,

I seek your kind advice regarding Yamaha AVR repair. I have an RXV-750. It just automatically shuts-off while in use.

I've back read this thread and found that there are many options but it's been suggested years ago already. I'd just like to ask if someone had a more recent experience regarding this.

Is there a service center or repair shop in or near Makati (besides Yupangco)? My last resort is audio world because of the location. Primary options would be somewhere nearer to Makati and with positive feedback.

Thanks in advance, Sirs.

cmagalona

nogo · « **Reply #64 on:** Apr 02, 2014 at 10:51 PM »

Quote from: audioworld on Dec 12, 2011 at 10:44 AM

Dear Sir, with regards to your HELP!!!!!!!! 2 to 3 months is the WAITING period for diagnosed units with no AVAILABLE parts .
We need to order the ORIGINAL parts for each diagnosed unit.
We give priority to those customers that reside in provinces or not within the metro.
Checking units for trouble might take 2 to 3 days , and not 2 to 3 months.
Maybe it's just that talking or conversing over the phone might cause some misunderstanding over details.
Hope that you still consider Audioworld for your repair service center.

Sir im planning to have my rx-v476. Mabasa kasi ito during typhoon yolanda. Local purchase po ito but not under warranty kasi 2011 ko ito nabili sa sns.
Kindly advise your address and contact details.

Thanks

zonks · « **Reply #65 on:** May 22, 2014 at 08:49 PM »

nagawa ng love electronics dito sa 20th avenue cubao, yun yamaha avr rxv465. okey na ulet

mykeg6 · « **Reply #66 on:** Jan 23, 2017 at 11:26 AM »

Quote from: zonks on May 22, 2014 at 08:49 PM

nagawa ng love electronics dito sa 20th avenue cubao, yun yamaha avr rxv465. okey na ulet

Ano sira sir?

mykeg6 · « **Reply #67 on:** Jan 23, 2017 at 11:28 AM »

I have a Yamaha RXV-1200. It has a damaged board. I guess mice might have peed on it.

Avesco (Yamaha service center) doesn't have parts for it na daw.

Does anybody have an idea who can fix this?

zonks · « **Reply #68 on:** Jan 23, 2017 at 02:18 PM »

Quote from: mykeg6 on Jan 23, 2017 at 11:28 AM

I have a Yamaha RXV-1200. It has a damaged board. I guess mice might have peed on it.

Avesco (Yamaha service center) doesn't have parts for it na daw.

Does anybody have an idea who can fix this?

board daw bro

mykeg6 · « **Reply #69 on:** Jan 23, 2017 at 04:38 PM »

Quote from: zonks on Jan 23, 2017 at 02:18 PM

board daw bro

I think kailangan jumper yung copper sa board.

edwn1220 · « **Reply #70 on:** Mar 03, 2018 at 03:09 PM »

Reviving an old thread.

Please recommend a reliable service center besides Audioworld. My Yamaha receiver (locally purchased, out of warranty already) conked out last night. It didn't overheat, no burnt odor, no current spikes; it just turned off by itself without warning. Looks like the protection circuitry kicked in since the standby indicator blinks continuously whenever I try to turn the power on.

Thanks.

zonks · « **Reply #71 on:** Mar 03, 2018 at 04:52 PM »

search mo sa fb si carlos sumayao

acespino2000 · « **Reply #72 on:** Mar 26, 2018 at 04:24 PM »

My Yamaha RX V375 is not powering on , seems nakaprotect mode

this is the 2nd time It happened since I bought it, and it is rarely used...

hope someone can point me to repair center here in the area

tnx

acespino2000 · « **Reply #73 on:** Aug 28, 2018 at 10:26 AM »

up.still looking

crankitup · « **Reply #74 on:** Aug 29, 2018 at 07:44 PM »

Did you get that locally? or 110v yan?

I have an Onkyo (US model) that's been junked bec of the blinking red light— thermal protection. Shop is charging too much to change a lot of parts. I don't understand why it seems to be happening not only w/ Onkyo but with Yamaha din pala.

t-bone · « **Reply #75 on:** Aug 29, 2018 at 08:00 PM »

Quote from: crankitup on Aug 29, 2018 at 07:44 PM

Did you get that locally? or 110v yan?

I have an Onkyo (US model) that's been junked bec of the blinking red light— thermal protection. Shop is charging too much to change a lot of parts. I don't understand why it seems to be happening not only w/ Onkyo but with Yamaha din pala.

Put a fan over your Onkyo. Prevents thermal shutdown

t-bone · « **Reply #76 on:** Aug 29, 2018 at 08:02 PM »

Quote from: acespino2000 on Aug 28, 2018 at 10:26 AM

up.still looking

I remember the Yamaha official Svc center is in Marikina. I used to have the number.

acespino2000 · « **Reply #77 on:** Aug 31, 2018 at 08:49 AM »

Quote from: t-bone on Aug 29, 2018 at 08:00 PM

Put a fan over your Onkyo. Prevents thermal shutdown

Got this from Sight and Sounds about 3yrs ago...hardly used as in once a month lang ata...twice this protect mode happened...checked the speaker wires for grounding or short ala naman

acespino2000 · « **Reply #78 on:** Aug 31, 2018 at 08:49 AM »

challenge for me is am from alabang and seems no credible repair service ata within the area

crankitup · « **Reply #79 on:** Sep 03, 2018 at 11:54 AM »

Quote from: t-bone on Aug 29, 2018 at 08:00 PM

Put a fan over your Onkyo. Prevents thermal shutdown

is that really the norm now? I've given up on the receiver. I brought it over to the official service centre of Onkyo. Apparently the parts are real parts that comes from Japan pa. Does anyone here know of a better place to get these fixed?

crankitup · « **Reply #80 on:** Sep 03, 2018 at 11:55 AM »

Quote from: acespino2000 on Aug 31, 2018 at 08:49 AM

challenge for me is am from alabang and seems no credible repair service ata within the area

the challenge might be to find a service center ....anywhere. Alabang is not that far from Manila or Makati.

mattmatt · « **Reply #81 on:** Oct 14, 2018 at 06:35 AM »

Onkyo TXNR 900 DSP board- where can i have this fix other than onkyo svc ctr?

zonks · « **Reply #82 on:** Oct 14, 2018 at 07:19 AM »

try to look for carlos sumayao sa fb

tigkal · « **Reply #83 on:** Oct 14, 2018 at 08:52 AM »

Quote from: crankitup on Sep 03, 2018 at 11:54 AM

is that really the norm now? I've given up on the receiver. I brought it over to the official service centre of Onkyo. Apparently the parts are real parts that comes from Japan pa. Does anyone here know of a better place to get these fixed?

Norm now due to climate change.. Put heatsink on the ic. Put fan on top. You can use laptop fan and cellphone charger.

nahtanoj_09 · « **Reply #84 on:** Jul 15, 2019 at 01:40 PM »

Carlos Sumayao Highly Recommended