Author Topic: AUDIO AMPLIFIED INC.  (Read 223942 times)

0 Members and 2 Guests are viewing this topic.

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Cayin A-88T
« Reply #30 on: Oct 04, 2005 at 12:43 PM »


CAYIN A-88T

The Cayin A-88T integrated amplifier is designed for those who seek the simplicity of a single chassis system, but with the performance of separates. With the A-88T, everything is perfect; the optics, the processing and above all, the sound. You control all functions through remote control; even changing from uni-linear to triode mode. The A-88T can also be used as a power amplifier alone.

SPECIFICATIONS

Power Output: 2 x 45W (8 ohms RMS, Ultranear)
2 x 22W (8 ohms RMS, Triode)
Frequency Response: 18Hz ~ 35kHz ± 1dB
Total Harmonic Distortion: 1 % (1kHz)
Input Sensitivity: 260mV 600mV (PRE-IN)
Signal to noise ratio: 90Db
Input Impedance: 100K ohms
Output Impedance: 4 ohms, 8 ohms, 16 ohms
Dimensions: 420 x 360 x 200 mm
Weight: 25kg
Power Consumption: 280W
Tube: KT88 (RUSSIA 6550EH) x 4, 6N8P (6SN7) x 2, 6N9P (6SL7) x 2


Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak XA6950
« Reply #31 on: Oct 04, 2005 at 01:22 PM »


XINDAK XA 6950
Class A Integrated Amplifier



SPECIFICATIONS:

Power Output: 2 x 100W(8W)
Frequency Response: 10Hz~100KHz (0,-3dB)
T.H.D.: <0.04%
S.N.R.: >95dB
Weight: 26Kg
Remote Controllable: Support
Dimensions(WxHxD): 430 x 185.5 x 454 mm

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak XA6900
« Reply #32 on: Oct 04, 2005 at 01:23 PM »


XINDAK XA 6900
Hybrid Integrated Amplifier


SPECIFICATIONS:

Power Output : 2 x 90 W (8 ohms)
Frequency Response : 10Hz ~ 100kHz ± 0.-4dB
Total Harmonic Distortion : <0.1%
Signal to Noise Ratio : 90dB
Tube : 2 x E88CC

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak A70
« Reply #33 on: Oct 04, 2005 at 01:25 PM »


XINDAK A70
Integrated Amplifier


SPECIFICATIONS:


Power Output: 2 x 70W (8 ohms)
Frequency Response: 10Hz ~ 70KHz
T.H.D.: ≤0.08%

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak Muse 2.0, 3.0
« Reply #34 on: Oct 04, 2005 at 01:27 PM »



XINDAK MUSE
2.0, 3.0



SPECIFICATIONS:

Muse 2.0 : Tube output
Muse 3.0 : Tube / Solid State output
Frequency Response : 20Hz-20kHz ± 0.5dB
S/N ratio : Coaxial1:>100dB, Coaxial 2:>95dB, Balance:> 105dB
THD+N : 0.0016%
Dynamic Range : 100dB
Power Consumption : <50W
Dimension : 430 × 114 × 347 mm
Weight : 8kg

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
XINDAK XA 3200
« Reply #35 on: Oct 04, 2005 at 01:30 PM »



XINDAK XA 3200
Pre Amplifier



SPECIFICATIONS:

Frequency Response : 10Hz~100KHz (0,-3dB)
Total Harmonic Distortion : 0.1%
Signal-to-Noise Ratio : 87dB
Output Voltage : 8.5V(RMS)
Weight : 7Kg
Remote Controllable : Support
Dimensions (W*H*D) : 430 x 90 x 280 mm
Tubes : 2 x 5670 (6N3), 1 x 12AU7

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak Cables
« Reply #36 on: Oct 04, 2005 at 01:32 PM »
Xindak Cables







Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak Power Filters
« Reply #37 on: Oct 04, 2005 at 01:37 PM »

Xindak XF Series Power Filters






XF-500 Power Filter






XF-1000 Power Filter





XF-2000 Power Filter


Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Xindak Dampers
« Reply #38 on: Oct 04, 2005 at 01:39 PM »



XINDAK VT Series
Damper Shackles
for Acoustics

Offline AudioAmplified

  • Trade Count: (+1)
  • DVD Addict
  • ***
  • Posts: 679
  • www.audioamplified.com
  • Liked:
  • Likes Given: 0
Re: AUDIO AMPLIFIED INC.
« Reply #39 on: Oct 04, 2005 at 01:41 PM »
XINDAK CDP & LINE CONDITIONERS

Muse 2.0 (Tube output only)  -  SRP P32,000
Muse 3.0 (Tube and SS output) -  SRP P38,000

XF-500 - SRP P4,500
XF-1000 - SRP P6,500
XF-1000S - SRP P10,000

XINDAK CABLES

FS-1 Speaker Cable  - SRP P12,000
FS-2 Speaker Cable - SRP P15,000

FS-3 Speaker Cable - SRP P15,000  (tentative)
FS-0.5 Speaker Cable - SRP P6,000 (tentative)
SC-01 Speaker Cable - SRP P2,500  (tentative)
AC-01 Signal Cable - SRP P2,000  (tentative)

Check Xindak website for product details please... Thanks
« Last Edit: Oct 04, 2005 at 01:42 PM by AudioAmplified »

Offline AudioAmplified

  • Trade Count: (+1)
  • DVD Addict
  • ***
  • Posts: 679
  • www.audioamplified.com
  • Liked:
  • Likes Given: 0
Re: AUDIO AMPLIFIED INC.
« Reply #40 on: Oct 04, 2005 at 01:43 PM »
XINDAK Spherical Cone Baseplate for Vibration Tuning(SCBVT)

The VT1 has a base made of graphite (99.99%) and a ball made of special ceramics. It is a top of the line damper-shackle that refines the high and mids while maintaining a tight bass. It also improves 3D imaging. The result? Piano, guitar and violin sparkle, while vocals are crystal-clear.   SRP P4,500

The VT2 has a base made of red sandalwood and a ball made of special ceramics. It produces greatly improved highs and better mids. This in turn results in accuracy of the sound field. It gives your system a sweet sound.  It is recommended for CD players that are less analytical.   SRP P3,500

The VT3 has a base made of ebong wood and a ball made of natural crystal. It allows for better and gentler resolution to high frequency, and tighter low frequency.  It is recommended for systems with excessive highs and weak lows.   SRP P3,000

The VT4 has a base made of graphite (99.99%) and a ball made of high-carbon steel. It generates abundant information in high frequency. Mids are soft and sweet sounding. There is good analysis of voice. Low frequency tightens a bit, has a soft sound, but is not loose. It is recommended for systems with weak highs and excessive lows.   SRP P2,000

The VT5 has a base made of red sandalwood and a ball made of high-carbon steel. It improves the overall sound of dark sounding equipment. The result is natural sounding mids and better highs. It is recommended for systems that lack accuracy or are excessively dark sounding.  SRP P1,800



Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Cayin SC 2
« Reply #41 on: Oct 04, 2005 at 01:56 PM »



CAYIN SC-2


SPECIFICATIONS:

Vacuum Tube Component : 2 x 6 DJ8
Total Harmonic Distortion : 0.01%
Signal to noise ratio : 95dB
Line Inputs : Auxiliary, Tuner, Tape, CD
Circuitry : Class A
Dimensions : 446 × 100 × 310mm
Weight : 10kg
Power Consumption : 100w

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Cayin SC 3-EX
« Reply #42 on: Oct 04, 2005 at 01:57 PM »


Cayin SC 3-EX

SPECIFICATIONS:

Vacuum Tube Component : 2 x 12AU7(ECC82), 4 x 12AX7(ECC83),
1 x 5AR4(GZ34)

Frequency Response : 5Hz ~ 50kHZ ± 0.5dB
Total Harmonic Distortion : 0.01%
Signal to noise ratio : 95dB
Input Impedance : 100K ohms
Output Impedance : 1 k ohm
Line Inputs : 6: CD, LD Tape tuner, Aux1/2
Circuitry : Class A
Dimensions : 210 x 200 x 440 mm
Weight : 9.5kg

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Cayin SC6-LS
« Reply #43 on: Oct 04, 2005 at 01:58 PM »


CAYIN SC 6LS


The Cayin SC-6LS all tube pre-amplifier is designed to give you music that is direct from the source, in the most detailed, colorless and realistic way possible. Internally, the SC-6LS features two 12AX7, two 12AU7, one 5AR4 tubes and a large power supply unit encased in a chrome plated chassis with a solid stainless steel front place.


SPECIFICATIONS:

Vacuum Tube Component : 12AX7EH×2, 12AU7EH×2, 5AR4×1
Frequency Response : 10Hz ~ 50kHZ ± 0.5dB
Total Harmonic Distortion : 0.01% (1kHz)
Signal to noise ratio : 95dB
Input Impedance : 250k ohms
Output Impedance : 3k ohms
Line Inputs : Auxiliary, Tuner, Tape, CD
Circuitry : Class A
Dimensions : 215 × 315 × 170 mm
Weight : 7kg
Power Consumption : 30w

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #44 on: Oct 04, 2005 at 02:58 PM »


SUPREME

SPECIFICATIONS:

Design : 3-way 5 unit, integrated design.
Frequency Response : 32Hz-40kHz.
Dispersion : horizontal off axis 30°, -3dB.
Sensitivity: 90dB/W/M
Impedance : 4ohm (minimum 4ohm/3kHz)
Power requirement : 50-350W recommended

Tweeter : G1. Aluminum Ribbon type (Ribbon dimension: L150 × W14.5 × T0.01mm), high power handling(100W), high output(102dB/W/M), easily field-replaceable, Shielded design.

Midrange : AC-130MK2. Quantity 2pcs, Specification 5.2" (130mm)?NON - WOVEN CARBON FIBER+KEVLAR CONE, f25mm copper cover aluminum voice coil with flat wire, 100mm×T20mm Y30 Ferrite magnet, long throw.

Woofer : AC-250MK2. Quantity 2pcs, Specification 10"(254mm), NON - WOVEN CARBON FIBER + CELL2MM + NON - WOVEN CARBON FIBER Sandwich cone,50mm copper cover aluminum voice coil with flat wire, 145mm×T20mm Y30 Ferrite magnet, long throw.

Absorbing materials : Polyester fibre and sponge.
Connections : 18mm Gold-plated binding post, bi-wiring design.
Structure of cabinet : Parabola-shaped cabinet structure. Midrange box and woofer box are completely separate. Inner strengthened braces that are made of 25mm MDF are positioned in the woofer box, 5 places in total. So, it can fully decrease the cabinet resonance and standing wave of the inside of cabinet.

Finish : Ball shaped sapele wood veneer +PE high gloss paint (piano paint), rosewood, cherrywood and reflective maple. 14 layers rigid PE paint finish on the surface of cabinet and manually polishing each layer paint carefully, and then burnishing with high-speed, waxing to high gloss surface.

Dimension (HWD) : 1412×306×430mm (the height is exclusive of spike).
Weight (net weight) : 79Kg/pc.
« Last Edit: Oct 04, 2005 at 03:01 PM by Mikey »

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #45 on: Oct 04, 2005 at 03:00 PM »


Harmony

SPECIFICATIONS:

Design : 3-way 4 unit, integrated design
Frequency : 30Hz-40kHz
Sensitivity : 91dB/W/M
Impedance : 4 ohm
Power Req : 50-350 W recommended

Tweeter : G1 aluminum ribbon type high power handling(100 W), high output (102dB/W/m),shielded design, easily field-replaceable.

Midwoofer : AC165/50C2C,,6.5” (165 mm) Sandwich cone (non-woven carbon fiber+cell 2 mm+non-woven carbon fiber) 50 mm copper cover aluminum voice coil with flat wire, ferrite magnet,short circuit cooper ring in the center magnet pole, long throw.

Woofer : AC200/50C2C 8” (200 mm) sandwich cone (non-woven carbon fiber+ cell 2mm+non-woven carbon fiber), 50mm copper cover aluminum voice coil with flat wire, ferrite magnet,short circuit cooper ring in the center magnet pole, long throw. 

Dimension : 1200×293×460 mm
Weight : 60 Kg/pc.

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #46 on: Oct 04, 2005 at 03:03 PM »



VOLLA

Volla is a small speaker we newly released, it is also our top and the best small speaker system at present.

Volla is two-way two-unit design with rear port, and we used our top ribbon tweeter G1 for this model. Midwoofer is our newest AC165/50C2C 6.5" driver, which used the sandwich cone (NON-WOVEN CARBON FIBER+ CELL2MM + NON-WOVEN CARBON FIBER); copper short-circuit ring is on the core magnet pole and the diameter of voice coil is 50mm. The crossover of Volla is not only designed precisely, but also totally adopts M-Cap Supreme series and MKP series capacitors from German Raimund Mundorf company, and inner connective cable is Classic cable from Swedish SUPRA, and 4pcs special-made copper connectors are for bi-wiring use.

The design of Volla cabinet not only fully considers the request of sound performance, but also gets perfect embodiment in aesthetics. The parabola shaped cabinet structure can diminish the bad resonance to the lowest level and also reduce the odds of standing wave inside of cabinet, and it also looks pleasing to both the eye and the mind in view. The cabinet surface of Volla is finished by various rare hardwood and high gloss PE paint, and be burnished by hand for more than ten times, then be polished. The finish of high quality not only makes Volla superior than the others and also makes Volla exquisite beyond compare.

Volla has top-ranking design. Its sound performance is realistic and natural, and that is what most of audio fans are eager for. Beautiful tone and abundant details, clear arrangements and broad sound stage, pure and honest voice,excellent dynamic, gorgeous high frequency, mellow and plump mid frequency, deep and powerful low frequency, and reasonable price make Volla become one of the first class small speakers in the world.


SPECIFICATIONS:

Design : 2-way 2 unit.
Frequency Response : 38Hz-40kHz.
Sensitivity : 88dB/W/M.
Impedance : 8 ohm (minimum 6.4 ohm)
Power requirement : 50-200W recommended

Tweeter : G1, Aluminum Ribbon type (Ribbon dimension: L150×W14.5×T0.01mm), high power handling(100W), high output(102dB/W/M), easily field-replaceable, Shielded design.

Midwoofer : model: AC165/50C2C, Specification 6.5" (165mm), SANDWICH CONE (NON - WOVEN CARBON FIBER+CELL2MM+NON - WOVEN CARBON FIBER), f50mm copper cover aluminum voice coil with flat wire, f120mm×T20mm Y30 Ferrite magnet, long throw.

Crossover Frequency : 1900Hz
Crossover’s attenuation slope : woofer-18dB, tweeter-18dB.

Crossover parts: M-cap Supreme MKP series capacitor for crossover of tweeter, M-cap MKP series capacitor for crossover of woofer, 5N copper conductor, metal oxide film resistor.

Connective wire : SUPRA Classic 2.5 cable for tweeter, and SUPRA PLY S/3.4 cable for woofer

Absorbing materials : Wool and sponge
Connections : 4pcs 18mm Gold-plated binding post, bi-wiring design
Finish : PE high gloss paint (piano paint), ball shaped sapele, bird eye maple, rosewood, cherrywood and reflective maple options.
Dimension (HWD) : 460 × 245 × 385mm (the depth is exclusive of grill).
Weight (net weight) : 21Kg/pc.
« Last Edit: Oct 04, 2005 at 03:03 PM by Mikey »

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #47 on: Oct 04, 2005 at 03:15 PM »




SHV-C


SPECIFICATIONS:

Design:2-way 3-units, bass reflex rear ported.
Frequency response:45Hz-40kHz
Sensitivity:90dB/W/m
Impedance:4 ohms (the minimum is 3.2 ohms)
Power requirement:50-150W recommended

Tweeter:G1. Aluminum ribbon type (the size of aluminum ribbon(LWT)150mm×14.5mm×0.01mm),high power handling (100W), high output (102dB/W/m), easily field-replaceable, shielded design.

Midwoofer : AC-165S/25CK 6.5"/165mm. NON-WOVEN CARBON FIBER + KEVLAR cone, the voice coil of 1"/25mm copper clad aluminum with flat wire, φ100mm×T20mm +φ100mm×T15mm Y30 ferrite magnet,long throw, shielded design.

Crossover frequency:2300Hz
Crossover attenuation slope:woofer-12dB,tweeter-18dB.

Crossover parts:M-Cap Supreme MKP series capacitors are used for the crossover of tweeter, Aurum Cantus metallic polypropylene capacitors are used for the crossover of woofer, 5N OFC inductor and metal oxide film resistor.

Connective wire:Aurum Cantus OCC 1.5mm2 Teflon isolated cable is used for the tweeter, and Aurum Cantus OCC 2.5mm2 Teflon isolated cable is used for the woofer.

Absorbing material:Polyester fibre and PU cell.
Connections:2 pcs custom-made 18mm gold-plated copper connectors.
Cabinet material:High quality MDF.
Finish:Standard finish is the ball shaped sapele/PE high gloss paint, also there are bird’s eye maple, rosewood, cherrywood, poplar burl, reflective maple and black PE high gloss paint (piano paint) for the options.

Outer dimension (HWD) of cabinet:24.6cm×68cm×39cm
Weight (net weight):28.2kg (62.17 lb)

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #48 on: Oct 04, 2005 at 03:17 PM »


MOON GODDESS II

SPECIFICATIONS:

Description:3-way, 4units.
Frequency Response:35Hz-40kHz.
Dispersion:horizontal off-axis 30°,-3dB.
sensitivity:89dB/W/m
Impedance:4ohms (minimum 3.2ohms).
Power Requirement: 50-200W recommended.

Tweeter:aluminum ribbon (the ribbon size:L70×W8.5×T0.01mm),high power handling, high output, easily field-replaceable, shielded design

Midrange:5.2"×2,130mm,NON-WOVEN CARBON FIBER+KEVLAR CONE,Φ25mm copper cover aluminum voice coil with flat wire, Φ100mm×T20mm magnet,long throw

Woofer: 8",200mm,NON-WOVEN CARBON FIBER+ CELL2MM+ NON-WOVEN CARBON FIBER SANDWICH CONE,Φ50mm copper cover aluminum voice coil with flat wire, Φ145mm×T20mm magnet,long throw.

Crossover Frequency:150Hz and 3500Hz.
Crossover’s attenuation slope:woofer -12dB,midrange –18dB, tweeter-6dB.
Crossover parts:high-quality polypropylene capacitor and non-polarized electrolysis capacitor, 5N copper wire inductor, metal oxide film resistor and ceramic resistor
Connective wire:5N copper wire.
Absorbing materials:special polyester fibres.
Connections: Gold-plated bi-wire binding post.
Dimensions(H×W×D):1160mm×182mm×400mm(the dimension of bottom board(WDT):236mm×425mm×40mm)
Cabinet material:MDF
Finish: cherrywood + PU matt paint,furthermore,also stock French sycamore,reflective maple and rosewood options
Net weight:36.50kg/pc (regard actual weight as standard)

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #49 on: Oct 04, 2005 at 03:18 PM »



MUSIC GODDESS II

As the name indicated, Music Goddess is an all-around performer both for music and movies.

Music Goddess is a 3-way, 3-unit rear-vented floorstanding system. It uses the world-famous Aurum Cantus G2 ribbon tweeter for the most detailed and transparent highs. The extended frequency response up to 40kHz of the G2 ribbon tweeter guarantees unsurpassable treble airiness. A refined 5.25" AC-130MKII is dedicated to mid-range reproduction. To match the fast transient response of the G2 ribbon tweeter, a light-weight and high-rigidity carbon fiber cone material and copper-coated aluminum flat-wire voice coil is adopted to minimize the moving mass and therefore improve transient response. The result, an extended upper frequency response beyond 9kHz. Its analytical and intimate sound character seamlessly blends with the G2 ribbon tweeter and the 10" woofer, and render a smooth and well balanced sound. The deep and tight bass response is handled by a AC-250MKII 10" woofer. The driver adopts a double-coil structure to improve power handling and reduce the inductance of voice coil. Combined with the precise-cast aluminum alloy frame and a hefty magnet, the low frequency of AC-250MKII woofer is extremely deep and powerful.

The cabinetry design and quality of Music Goddess is indeed exceptional. The massive materials (close to 100 lbs each) and internal reinforce frames eliminate cabinetry resonances. The slanted tweeter and mid-range baffle not only improve phase coherence and dispersion, but also make the Music Goddess a curvaceous beauty. After numerous manual polishing and burnishing processes, the high-quality piano paint finish provides this beauty, nobleness and elegance.



SPECIFICATIONS:

Description:3-way, 3units.
Frequency Response:35Hz-40kHz.
Dispersion:horizontal off-axis 30°,-3dB.
sensitivity:89dB/W/m
Impedance:8ohms (minimum 6.4ohms)
Power Requirement: 50-200W recommended

Tweeter:aluminum ribbon (the ribbon size:L70×W8.5×T0.01mm),high power handling, high output, easily field-replaceable, shielded design

Midrange:5.2",130mm,NON-WOVEN CARBON FIBER+KEVLAR CONE,Φ25mm copper cover aluminum voice coil with flat wire, Φ100mm×T20mm magnet,long throw

Woofer: 8",200mm,NON-WOVEN CARBON FIBER + CELL2MM + NON-WOVEN CARBON FIBER SANDWICH CONE, Φ50mm copper cover aluminum voice coil with flat wire, Φ145mm×T20mm magnet,long throw

Crossover Frequency:180Hz and 3500Hz.
Crossover’s attenuation slope:woofer -12dB,midrange –18dB, tweeter-6dB.
Crossover parts:high-quality polypropylene capacitor and non-polarized electrolysis capacitor, 5N copper wire inductor, metal oxide film resistor and ceramic resistor.

Connective wire:5N copper wire.
Absorbing materials:special polyester fibres.

Connections: Gold-plated bi-wire binding post.
Dimensions(H×W×D):1050mm×255mm×330mm(the height not include the spike).

Cabinet material:MDF
Finish:black PE gloss paint(piano paint),furthermore,also stock poplar burl, rosewood, French sycamore,reflective maple and cherrywood options.

Net weight:35kg/pc (regard actual weight as standard)

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #50 on: Oct 04, 2005 at 03:21 PM »


MOON RIVER


The Moon River MINI is the small floor ribbon speaker, which has an excellent performance.

The design of Moon River MINI is two way, three unit speaker system, with a port at the rear. The 185mm(7.3″) width of the cabinet can fully reduce blights of mid-high frequency circle reflection. The rear sloping front baffle design is not only great but also has some varieties with the uniform cabinet shape. Every part reveals designer’s consciousness, and the succinct lines, light yellow maple, black front baffle, silver ribbon tweeter faceplate, the color arrangement is comely and elegant. The design of the Moon River MINI is timeless and a study in understated elegance.

The narrow cabinet, rear sloping front baffle, strong structure with many parts of inside reinforcement and high quality MDF board used is very helpful for the music replay.

Moon River MINI offer full, rich, pure timbre, and natural sounding, which also provides open sound staging to fill the whole room with ease. Moon River MINI is suitable for all types of music replay especially astonishing and more dulcet for playing solo, voice and small group repertoire.


SPECIFICATIONS:

Sensitivity: 88dB/W/m
Impedance: 4ohms (minimum 3.20ohms)
Power Requirement: 50—150W recommended.
 
Tweeter: G3 aluminum ribbon(the ribbon size: L130mm×W8.5mm×T0.01mm), high power handling, high output, easily field-replaceable, shielded design.

Midwoofer: AC-130F35, 5.2″, 130mm, CARBON FIBER + POLYTHENE CONE, Φ35mm copper cover aluminum voice coil with flat wire, Φ120×20mm magnet, long throw.

Crossover Frequency: 3100Hz
Crossover’s attenuation slope: woofer –12dB, tweeter –18dB.

Crossover parts: high-quality polypropylene capacitor, 5N copper wire inductor, metal oxide film resistor.
Connective wire: 5N copper wire

Absorbing materials: special polyester fibres
Connections: Gold-plated bi-wire binding post

Dimensions(HWD):1097mm×185mm×310mm(the deepest part),
Finish: maple+PU matt paint. Furthermore, also stock French sycamore, cherrywood, reflective maple and rosewood options.

Net weight: 23Kg/pc(regard actual weight as standard)

P.S.: midwoofer can be changed to AC-130MKⅡ(5.2″, 130mm, NOV+WOVEN CARBON FIBER+ KEVLAR CONE, Φ25mm copper cover aluminum voice coil with flat wire,Φ100mm×20mm magnet, long linear travel.

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #51 on: Oct 04, 2005 at 03:23 PM »



MELODY 102

SPECIFICATIONS:
[/color]

Midrange: AC120/50CK,4.8"/120mm,NON-WOVEN CARBON FIBER+KEVLAR CONE, 2"/50mm copper clad aluminum voice coil with flat wire,short circuit copper ring in the center magnet pole, φ120mm×T20mm Y30 Ferrite magnet,long throw

Woofer:Model:AC200/50C2C,8"/200mm,Sandwich cone ( NON-WOVEN CARBON FIBER+CELL 2mm + NON-WOVEN CARBON FIBER),2"/50mm copper clad aluminum voice coil with flat wire,short circuit copper ring in the center magnet pole, φ120mm×T20mm Y30 Ferrite magnet,long throw

Crossover frequency:200Hz and 2300Hz
Crossover’s attenuation slope:woofer -12dB,midrange -6dB,tweeter -18dB
Crossover parts:M-Cap Supreme MKP series capacitors are used for crossover of tweeter, Aurum Cantus polypropylene capacitor and nonpolarity electrolytic capacitorare used for the crossover of mid/woofer, 5N OFC inductor and metallic oxide film resistor and ceramic resistor

Connective wire:Aurum Cantus OCC 1.5mm2 Teflon insulated cable is used for tweeter and midrange, and Aurum Cantus OCC 2.5mm2 Teflon insulated cable is used for woofer

Absorbing material:Polyester fibre and PU cell
Connections:4pcs custom-made 18mm gold-plated copper binding post, bi-wiring design

Cabinet material:MDF with high quality
Standard Finish:The standard finish is cherrywood/PU matt paint, rosewood/PU matt paint, and reflective maple/PU matt paint for options
Special finish:The special finish is cherrywood/PE high gloss paint, and rosewood/PE high gloss paint for options

Dimension of the cabinet(HWD):110cm×25.4cm×35.2cm (43.31″×10″×13.86″)this height is exclusive of spike and the deep is exclusive of grill)

Weight (net weight):38.5 kg/pc (84.9 lb)
Shipping volume:0.475m3 per pair
Shipping weight (gross weight):the standard finish is 96 kg (211.64 lb) per pair, and the special finish is 100 kg (220.5 lb) per pair.

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #52 on: Oct 04, 2005 at 03:24 PM »


MELODY 103

SPECIFICATIONS:[/b]

Design:2-way 2-units.
Frequency response:35Hz-40kHz.
Sensitivity:89dB/W/m.
Impedance:8 ohms (Minimum 6.4 ohms)
Power requirement:50-200W recommended.

Tweeter:G3i,Aluminum Ribbon type (Ribbon dimension:L100mm×W8.50mm×T0.01mm),high power handling(50W),high output (98dB/W/m),easily field-replaceable, shielded design.

Midwoofer:AC180/50C2C,7"/180mm,Sandwich cone ( NON-WOVEN CARBON FIBER+CELL 2mm + NON - WOVEN CARBON FIBER ),2"/50mm copper cover aluminum voice coil with flat wire,short circuit cooper ring in the center magnet pole, φ120mm×T20mm Y30 Ferrite magnet,long throw.

Crossover frequency:2200Hz.
Crossover’s attenuation slope (per octave):woofer -12dB,tweeter -18dB.
Crossover parts:High quality polypropylene film capacitor and metal oxide film resistor and OFC inductor.

Connective wire:5N copper cable.
Absorbing material:Polyester fibre and PU cell.
Connections:4pcs 18mm golden-plated copper binding post, bi-wiring design.
Cabinet material:MDF.

Standard Finish:The standard finish is reflective maple/PU matt paint, cherrywood and rosewood for options.
Special finish: The special finish is reflective maple/PE high gloss paint (piano paint), cherrywood, rosewood and black high gloss paint for options.

Dimension of the cabinet(HWD):1025mm×220mm×273mm (the height is exclusive of spike and the deep is exclusive of grill).
Weight (net weight):22Kg/pc.

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #53 on: Oct 04, 2005 at 03:27 PM »


MELODY M-C

SPECIFICATIONS:[/b]

Design:2-way 3-units, bass reflex rear ported.
Frequency response:48Hz-40kHz
Sensitivity:90dB/W/m
Impedance:4 ohms (the minimum is 3.2 ohms).
Power requirement:50-150W recommended.

Tweeter:G3i. Aluminum ribbon type (the size of aluminum ribbon(LWT): 100mm×8.5mm×0.01mm),high power handling(50W), high output(98dB/W/m), easily field-replaceable, shielded design.

Midwoofer:Model: AC-165S/25CK 6.5"/165mm. NON-WOVEN CARBON FIBER + KEVLAR cone, the voice coil of 1"/25mm copper clad aluminum with flat wire, φ100mm×T20mm +φ100mm×T15mm Y30 ferrite magnet,long throw, shielded design.

Crossover frequency:2400Hz
Crossover attenuation slope:woofer-12dB,tweeter-18dB.

Crossover parts:M-Cap MKP series capacitor are used for the crossover of tweeter, Aurum Cantus metallic polypropylene capacitor are used for the crossover of woofer, 5N OFC inductor and metal oxide film resistor.
Connective wire:Aurum Cantus OCC 1.5mm2 Teflon isolated cable is used for the tweeter, and Aurum Cantus OCC 2.5mm2 Teflon isolated cable is used for the woofer.

Absorbing material:Polyester fibre and PU cell.
Connections:2 pcs custom-made 18mm gold-plated copper connectors.
Cabinet material:High quality MDF.

Standard finish:cherrywood/PU matt paint, also there are rosewood/PU matt paint and reflective maple/PU matt paint for the options.

Special finish:cherrywood/PE high gloss paint, also there are rosewood/PE high gloss paint,reflective maple/PE high gloss paint and black PE high gloss paint (piano paint) for the options.

Outer dimension (HWD) of cabinet:22.4cm×60cm×37.5cm
Weight (net weight):20.5kg (45.20 lb)

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #54 on: Oct 04, 2005 at 03:28 PM »


LEISURE 3SE

The Leisure 3 SE is a compact loudspeaker Aurum Cantus newly released, which inherits all excellent ancestry of Leisure 2 SE, but its sound performance is much more attractive and charming. We are sure that you will admire it fondly once you have it

 The design of Leisure 3 SE is two-way two units with rear port, its tweeter is G3Si aluminum ribbon tweeter of Aurum Cantus and the midwoofer is AC-165 6.5"unit. The crossover design of Leisure 3 SE is very precise and also with expensive Mundorf Supreme MKP capacitors, the inner connecting wire is SUPRA Classic cable, two pcs golden-plated brass binding post specially made is suitable for various Loudspeaker Cables with different connecting way.The design of Leisure 3 SE is dignity and elegance. Two sides of the cabinet whose main tone is black color can be mounted various precious hardwood, and the whole of cabinet surface is finished by hard PE paint, after 14 times manual polishing, burning process with high speed then waxing to high gloss paint surface. Those people who know carpentry and surface finish are impressed by the cabinet structure, finish and every place of Leisure 3 SE. The pyramidal shape of Leisure 3 SE cabinet not only represents a visual enjoyment but also can decrease the bad resonance and standing wave woofer caused at the lowest level. The front baffle with little declining is helpful for vertical diffusing of ribbon tweeter and also can increase boundless charming for this unique loudspeaker.

 Leisure 3 SE can match with many brand name amplifier with mid-price very well, and also easily driving. It can breezily exert all of its characters and is suitable for any kinds of music even playing the dynamic sinfonia. In a word, Leisure 3 SE will play any music you expect, and make the sound stage in true condition. Nature, sweet mid-high frequency and deep, plump bass frequency surely will give you a treasured memory.


SPECIFICATIONS:

Tweeter:G3Si. Aluminum ribbon type(the dimension of ribbon:L100×W8.5×T0.01mm),high power handling,high output,easily field-replaceable,,shielded design.

Midwoofer:AC-165. 6.5",165mm,NON-WOVEN CARBON
FIBER+KEVLAR CONE,Φ25mm copper cover aluminum voice coil with flat wire,Φ100×T20mm Y30 ferrite magnet,long throw.
 
Frequency of Crossover:2400Hz
Attenuation slope of Crossover:woofer-12dB,tweeter-18dB.

Crossover parts:High-quality polypropylene capacitor,5N copper wire inductor,metal oxide film resistor and ceramic resistor.

Connecting wire:5N copper wire
Absorbing material:Special polyester fibre and PU cell.
Connecting way:Two pcs golden-plated brass binding post.
Cabinet material:MDF

Finish:The standard finish is reflective maple + PE high gloss paint
(piano paint)
The dimension of cabinet (HWD):400×246×302 (15.75"×9.69"×11.89")
Weight (net weight):12kg/pc (26.50 lb/pc)


Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #55 on: Oct 04, 2005 at 03:36 PM »


MRC MKII

The MR—C MKⅡ is an excellent center channel speaker. It can agilely match with Aurum Cantus’s Music Goddess, Music spirit, Moon river, Moon river Mini, Moon Goddess, AC-782 Classic, Leisure2, Leisure 2 SE and many speakers to combine one set of top grade home theatre speaker system.

The design of MR—C MKⅡ is two-way three-units, and with rear port. Its tweeter is G2 aluminum ribbon unit and the woofer is AC-130MKⅡunit (shielded design) that codeveloped by Italian ATD and Aurum Cantus . The cabinet is hand-made and the finish of side panel finish is rosewood that has lacquered 14 times PE gloss paint, after several times hand grinding and then do high speed polishing work.


SPECIFICATIONS:

Description: 2-way, 3-units.
Frequency Range: 55Hz—40kHz.
Dispersion: horizontal off-axis 30°, –3dB.
Sensitivity: 90dB/W/m
Impedance: 4ohms(minimum 3.2ohms)
Power Requirement: 50—150W recommended.

Tweeter: aluminum ribbon(the ribbon size:L70×W8.5×T0.01mm), High power handling, High output, easily field-replaceable, shielded design.

Midwoofer: 5.2", 130mm, NON-WOVEN CARBON FIBER + KEVLAR CONE,
Φ25mm copper cover aluminum voice coil with flat wire, Φ100×20+Φ100×15mm magnet, shielded design.

Crossover Frequency: 3200Hz
Crossover’s attenuation slope: woofer –12dB, tweeter –12dB.
Crossover parts: high-quality polypropylene capacitor, 5N copper wire inductor, metal oxide film resistor.

Connective wire: 5N copper wire
Absorbing materials: special polyester fibres
Connections: 2pcs gold-plated binding posts
Dimensions(HWD):190×600×276mm
Cabinet material: MDF

Finish: rosewood veneer+PE gloss paint(piano paint), furthermore, also stock poplar burl, black walnut, French sycamore, reflective maple and cherrywood options.

Net weight: 15Kg/pc (regard actual weight as standard)

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #56 on: Oct 04, 2005 at 03:42 PM »


LEISURE 2SE

The Leisure 2 SE is our most compact speaker. It has made an outstanding achievement since put into market two years ago, and got favorable comments from audio fans at home and abroad.


Leisure 2 SE is a 2-way, 2-unit rear-port bookshelf speaker whose tweeter adopts world-famous AURUM CANTUS aluminum ribbon driver-G2, and woofer adopts AURUM CANTUS AC-130 MK2 5.2" driver. Through development for many years, G2 tweeter and AC-130 MK2 woofer have been mature on the technology, and successfully used in many models of AURUM CANTUS.

The design of Leisure 2 SE cabinet is noble and elegant. Mounted precious rosewood on both sides, the cabinet whose main hue is black fully expresses the connotation of "luxury". Besides a balanced visual sense, the pyramidal mold-making of cabinet can better eliminate the bad resonance and standing wave caused by the operation of woofer. The slightly back-inclined front baffle not only makes this compact speaker brilliant and outstanding, but the most important is to get ideal linear phase.

Leisure 2 SE is easy to drive and can be well matched with mid-cost amplifiers from lots of companies. Maybe most people find it hard to believe that such a small speaker can make such a big sound with deep, rich bass and startling dynamics. But as long as you listen to it, you surely will be convinced by its perfect performance and enchanting charm. Its sound offers a combination of nature, authenticity, detail, timbre, imaging and deep bass and punch.

The extraordinary performance of Leisure 2 SE is made possible by special hand-built drivers, cabinet and ear-tuned crossover network, which expresses the long and rich experience of AURUM CANTUS in Hi-Fi speaker systems again.



SPECIFICATIONS:

Description: 2-way, 2-units
Frequency Range: 55Hz—40kHz
Dispersion: horizontal off-axis 30°,–3dB.
Sensitivity: 87dB/W/m
Impedance: 8ohms (minimum 6.4ohms)
Power Requirement: 50—150W recommended.

Tweeter: aluminum ribbon(the ribbon size:L70×W8.5×T0.01mm),high power handling, high output, easily field-replaceable, shielded design.

Midwoofer: 5.2", 130mm, NON-WOVEN CARBON FIBER + KEVLAR CONE, Φ25mm copper cover aluminum voice coil with flat wire, Φ100×20mm magnet, long throw.

Crossover Frequency: 2500Hz
Crossover’s attenuation slope: woofer –12dB, tweeter –18dB.
Crossover parts: high-quality polypropylene capacitor, 5N copper wire inductor, metal oxide film resistor and ceramic resistor.

Connective wire: 5N copper wire
Absorbing materials: special polyester fibres
Connections: 2 pcs gold-plated binding posts
Dimensions(HWD):360×236×280mm
Cabinet material: MDF

Finish: rosewood veneer+PE gloss paint (piano paint), furthermore, also stock poplar burl, black walnut, French sycamore, reflective maple and cherrywood options.

Net weight: 10.5Kg/pc (regard actual weight as standard)


Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Re: AUDIO AMPLIFIED INC.
« Reply #57 on: Oct 04, 2005 at 03:46 PM »



LEISURE 2SV

   Leisure 2 SV is a compact speaker system with high performance-price ratio. Not only its sound performance is excellent, but also the manufacturing craft is superior.

 Leisure 2 SV is 2-way 2-unit rear port design. It adopts Aurum Cantus G2i pure aluminum ribbon tweeter and AC-130F1 5.2" midwoofer. The crossover design of Leisure 2 SV is precise and also has M-Cap MKP series capacitor, 2 big gold-plated copper connectors can be fit for Loudspeaker Cables in various connecting ways flexibly.

 Leisure 2 SV is suitable for all kinds of music, and also can be driven easily. Many amplifiers in middle and low price can match with it very well. If Leisure 2 SV matched with Leisure 2 SV-C,Leisure 2 SV-S and SW-10,a set of advanced home theatre speaker system would be ready.


SPECIFICATIONS:

Design:2-way,2-unist rear port
Frequency response: 60Hz-40kHz
Sensitivity:87dB/W/m
Impedance:8 ohms (the minimum is 7.5 ohms)
Power requirement:50-100W recommended

Tweeter:G2i,pure aluminum ribbon tweeter(the size of aluminum ribbon:L60mm×W8.5mm×T0.01mm),high power handling, high output, easily field-replaceable, shielded design.

Midwoofer: AC-130F1,5.2"/130mm,aluminum metal basket, cone of compound material,φ25mm copper cover aluminum voice coil with flat wire,φ100mm×T20mm Y30 ferrite magnet,long throw.

Crossover frequency:2700Hz
Crossover attenuation slope:woofer-12dB,tweeter-18dB.

Crossover parts:high quality polypropylene capacitor,5N copper inductor, metal oxide film resistor and ceramic resistor.
Inner connective wire:5N copper wire.

Connections:2 big gold-plated copper connectors.
Absorbing material: special polyester fibre and PU cell.
Cabinet material:MDF

Finish::The standard finish is cherrywood/PU matt paint. Also there are rosewood, black walnut and American maple for the options. If choosing high gloss paint finish (Piano paint), the price is different.

Cabinet dimension(HWD):315mm×188mm×310mm
Weight(net weight):8.5Kg/pc

Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #58 on: Oct 04, 2005 at 03:52 PM »


LEISURE 2SV-S

Leisure 2 SV-S is a rear speaker with pure aluminum ribbon tweeter. It can not only be mounted on the wall, but also be put on the stand. Furthermore, Leisure 2 SV-S can be regarded as a front speaker completely. This is a small speaker with high performance-price ratio, and of course it can spark your interests highly.


SPECIFICATIONS:

Design:2-way, 2-units front port
Frequency response: 65Hz-40kHz
Sensitivity:88dB/W/m
Impedance:8ohms (the minimum is 7.5ohms)
Power requirement:50-100W recommended

Tweeter:G2i,pure aluminum ribbon tweeter(the size of aluminum ribbon:L60mm×W8.5mm×T0.01mm),high power handling, high output, easily field-replaceable and shielded design.

Midwoofer: AC-130F1,5.2"/130mm,aluminum metal basket, cone of compound material, voice coil of φ25mm round copper wire,φ100mm×T20mm Y25 ferrite magnet,long throw.

Crossover frequency:2700Hz
Crossover attenuation slope:woofer-12dB,tweeter-12dB.
Crossover parts:high quality polypropylene capacitor,5N copper inductor, metal oxide film resistor and ceramic resistor.

Inner connective wire:5N copper wire.
Connections:2 pcs gold-plated copper connectors.
Absorbing material: special polyester fibre and PU cell.
Cabinet material:MDF

Finish::The standard finish is cherrywood/PU matt paint. Also there are rosewood, black walnut and American maple for the options. If choosing high gloss paint finish (Piano paint), the price is different.

Cabinet dimension(HWD):349mm×188mm×190mm
Weight(net weight):6.6Kg/pc


Offline Mikey

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 41
  • Liked:
  • Likes Given: 0
Aurum Cantus Speakers
« Reply #59 on: Oct 04, 2005 at 03:58 PM »


LEISURE 2SV-C

In order to match the new products Leisure 2 SV (front speaker) and Leisure 2 SV-S(rear speaker)very well, we newly released a center channel speaker Leisure 2 SV-C, so these models can be easily combined to a perfect High End home theatre speaker system.


SPECIFICATIONS:

Design:2-way,3-units acoustic suspension
Frequency response: 70Hz-40kHz
Sensitivity:89dB/W/m
Impedance:8ohms (the minimum is 7.5ohms)
Power requirement:50-100W

Tweeter:G2i,pure aluminum ribbon tweeter(the size of aluminum ribbon:L60mm×W8.5mm×T0.01mm),high power handling, high output, easily field-replaceable, shielded design.

Midwoofer: AC-130F1S,5.2"/130mm,aluminum metal basket, cone of compound material, voice coil of φ25mm round copper wire,φ70mm×T20mm +φ70mm×T15mm Y25 ferrite magnet,shielded design, long throw.

Crossover frequency:2700Hz
Crossover attenuation slope:woofer-12dB,tweeter-12dB.

Crossover parts:high quality polypropylene capacitor,5N copper inductor, metal oxide film resistor and ceramic resistor.

Inner connective wire:5N copper wire.
Connections:2 pcs big gold-plated copper connectors.
Absorbing material: special polyester fibre and PU cell.
Cabinet material:MDF

Finish::The standard finish is cherrywood/PU matt paint. Also there are rosewood, black walnut and American maple for the options. If choosing high gloss paint finish (Piano paint), the price is different.

Cabinet dimension(HWD):188mm×496mm×305mm
Weight(net weight):12.6Kg/pc