Topic: speaker wires

[CeeV]

Thanks sir....

@kt...sorry sir sa OT

[kt]

bro blackmoly i meant yung sa tips mismo ng banana plug going terminals para malaman ko yung spacing nila.

Tnx

[blackmoly]

bro blackmoly i meant yung sa tips mismo ng banana plug going terminals para malaman ko yung spacing nila.

Tnx

 

i'll measure bro pag uwi ko, nasa work kasi ako

[kt]

i'll measure bro pag uwi ko, nasa work kasi ako

nice tnx bro! 

[gunslinger]

Where can you get a gauge 14 wire na single lang? Most of the speaker wires kasi na binebenta sa raon yung double strand na. I mean isa lang yung wire pero dalawa na yung dulo niya for the positive and negative terminal. Gusto ko din sana gawin yung ginagawa niyo na braided kaya nagahahanap ako ng single strand. Nagtanong na ako sa handyman at ace pero wala silang gauge 14. Puro maninipis lang yung meron sila. 

[retro12195]

Where can you get a gauge 14 wire na single lang? Most of the speaker wires kasi na binebenta sa raon yung double strand na. I mean isa lang yung wire pero dalawa na yung dulo niya for the positive and negative terminal. Gusto ko din sana gawin yung ginagawa niyo na braided kaya nagahahanap ako ng single strand. Nagtanong na ako sa handyman at ace pero wala silang gauge 14. Puro maninipis lang yung meron sila. 

bro NEIL call 374 8668 to 71 baka meron sila gauge 14.good WEST AVE. area good luck.

[gunslinger]

bro NEIL call 374 8668 to 71 baka meron sila gauge 14.good WEST AVE. area good luck.

Thank you sir Rod. Tawagan ko to maya. Wag sana masiyado expensive.

[kt]

bro gunslinger yung sakin hiniwalay ko lang din hehe

[gunslinger]

bro gunslinger yung sakin hiniwalay ko lang din hehe

Ganda nga nung sayo sir eh. Kaya na-inspire ako.Tsaka gusto ko din white and braided. Hirap kasi iwasan na walang exposed wires sa set-up lalo na pag hindi talaga siya designed na HT room at walang wall panels to hide it. Mas presentable siya tignan pag braided and it adds character dun sa overall effect ng set-up. Unlike pag plain wire na nagiging clutter ang itsura and could reflect neglected cable management.

[kt]

bro gunslinger tnx bro! napag experimentahan ko lang din na inspire sa mga nagpost dito. pero sis ko ang nag braid nun hahaha ako lang nag shrink tubes n terminations hehe

naku pag nakita mo yung setup ko ang kalat talaga pag madami ng cables nga...buti ako natakpan ng rack sa likod hahaha 

[markcrenz]

Where can you get a gauge 14 wire na single lang? Most of the speaker wires kasi na binebenta sa raon yung double strand na. I mean isa lang yung wire pero dalawa na yung dulo niya for the positive and negative terminal. Gusto ko din sana gawin yung ginagawa niyo na braided kaya nagahahanap ako ng single strand. Nagtanong na ako sa handyman at ace pero wala silang gauge 14. Puro maninipis lang yung meron sila. 

auto supply

[marlboro]

have anyone of you tried using car audio interconnects and speaker wires? (stinger, sinuslive or knukonceptz)?

any noticeable difference in sound?

[Nelson de Leon]

Where can you get a gauge 14 wire na single lang? Most of the speaker wires kasi na binebenta sa raon yung double strand na. I mean isa lang yung wire pero dalawa na yung dulo niya for the positive and negative terminal. Gusto ko din sana gawin yung ginagawa niyo na braided kaya nagahahanap ako ng single strand. Nagtanong na ako sa handyman at ace pero wala silang gauge 14. Puro maninipis lang yung meron sila. 

bro gunslinger yung sakin hiniwalay ko lang din hehe

Meron akong stock nito. From #12 to #18. P or text nyo ako. OEM wires ang sa akin. Di makapal ang balat pero siksik sa copper. Same quality talaga ng OEM. I can give it at presyong puhunan to whoever ang pwedeng mag-braid ng 1 set for me. Hehe!

[wengkapre]

my diy speaker cables:

http://diyaudioprojects.com/Power/Low-Inductance-DIY-Speaker-Cables/



for my diy gainclone amp + diy BS



im using 16awg stranded silver conductors (salvaged ) with cheapo banana plugs.

temporarily using black shrinkable tubes, will replace with colored once napasyal sa raon 

Ganda Bro

[audiojunkie]

my diy speaker cables:
http://diyaudioprojects.com/Power/Low-Inductance-DIY-Speaker-Cables/

for my diy gainclone amp + diy BS

im using 16awg stranded silver conductors (salvaged ) with cheapo banana plugs.
temporarily using black shrinkable tubes, will replace with colored once napasyal sa raon 

Wow! Ganda.. 
Since your speaker is Biwirable, I suggest to try this connnection. There's a big difference in SQ...just MHO 

[plapoy]

Mga gurus,

Quick question lang po regarding speaker wires.. Saan po kaya ako makakahanap ng wire na yung kabila is for RCA para sa amp ko. then yung other end naman is normal wire speaker sya. help naman po..

Thanks in Advance

[simonzaide]

Mga gurus,

Quick question lang po regarding speaker wires.. Saan po kaya ako makakahanap ng wire na yung kabila is for RCA para sa amp ko. then yung other end naman is normal wire speaker sya. help naman po..

Thanks in Advance

bro i think it wont be possible to do this..

if im not mistaken the rca to speaker type of connector is for active speakers (self amplified) if your going to use a passive speaker i think an RCA out wont be able to power the speaker

[ninjababez®]

Mga gurus,

Quick question lang po regarding speaker wires.. Saan po kaya ako makakahanap ng wire na yung kabila is for RCA para sa amp ko. then yung other end naman is normal wire speaker sya. help naman po..

Thanks in Advance

like what simonzaide said baka di gumana.  you can DIY RCA to 2wire negative and postive.  pero san mo gagamitin?  baka pre-out lang yan, di tutunog 

[plapoy]

Salamat sir ninjababez at sir simonzaide sa reply.. Kasi po yung subs ko na dalawa JBL GT5 nkakabit po sa Konzert AV502 currently.. try ko po sana ilagay dun sa Super Bass(RCA) nya kung pwede po mapatunog.. possible po kaya un?.

PS. Yung SuperBass po nya na RCA is negative at positive po..

[ninjababez®]

Salamat sir ninjababez at sir simonzaide sa reply.. Kasi po yung subs ko na dalawa JBL GT5 nkakabit po sa Konzert AV502 currently.. try ko po sana ilagay dun sa Super Bass(RCA) nya kung pwede po mapatunog.. possible po kaya un?.

PS. Yung SuperBass po nya na RCA is negative at positive po..

not really that familiar with the amp youre using, try posting here

[plapoy]

Ok po Sir Ninja try ko po picturan.. parang kelangan ata ng DIY amp ni sir pilyo yung gusto ko mangyari para gumana sya.. ;D;D

[jambajuice]

hey guys. decided to just ask here instead of making a new thread.

my samsung home theater broke. this kind.



any idea where I can buy replacements locally
?

[markcrenz]

Baka may old pc psu ka maybe you can DIY. Gumawa ako dati ng ganyan para sa samsung ng pamangkin ko. Yung terminal block papuntang mobo tinabas ko lang.

[tony]

Where can you get a gauge 14 wire na single lang?

auto supply shops, ask for the japanese made wires, huwag china...

i use #11 instrumentation cables with shields, i got it from Gerry Morales sa facebook....he also has a lot of heavy duty power cables...

[Nelson de Leon]

hey guys. decided to just ask here instead of making a new thread.

my samsung home theater broke. this kind.



any idea where I can buy replacements locally
?

Terminals ba ang kailangan niya sir?

[at_sunset_blvd]

hey guys. decided to just ask here instead of making a new thread.

my samsung home theater broke. this kind.



any idea where I can buy replacements locally
?

Do you need the speaker wires? or the unit (HTIB)? If you need the wires I may still have 1pair left & will look for it if you really need it badly?

[scumbads]

sir,
 ask lang about sa belden 8442 22awg na wire, oks lang ba na gamitin speaker wire to?

[audiojunkie]

sir,
 ask lang about sa belden 8442 22awg na wire, oks lang ba na gamitin speaker wire to?

Sir anong speaker mo ito gagamitin at amp..?

[scumbads]

sir audiojunkie, sa sakura amp 225t + bookshelf jbl studio..

[Nelson de Leon]

Braid mo para kumapal yun wire.

Sent from my ASUS_Z012D using Tapatalk