Author Topic: Yamaha Receivers (Read 400336 times)

Allan_2180 · « **Reply #3870 on:** Aug 29, 2015 at 01:16 AM »

The latest firmware update(higher than 1.60) killed my Aventage RX-A810.
The front panel now displays "Internal Error".
I tried upgrading again via USB but "Error 4000" appears.

dts_hdma · « **Reply #3871 on:** Aug 31, 2015 at 09:27 AM »

^ thanks for the info. I have the 820 and never been updated since I got it 2 or 3 yrs ago. As long as walang problema di ako naguupdate.

Allan_2180 · « **Reply #3872 on:** Aug 31, 2015 at 02:50 PM »

It always appears on the OSD na may latest firmware, and na-curious ako kung ano meron sa latest update I checked on Yamaha Aventage support site and found out firmware update version 1.60 lang ang nirelease nila and it was 11/21/2014 pa, I have no idea what is new with the new firmware so I go ahead with the upgrade and successful naman cya, wala naman nabago but I think it has something to do with Yamaha's MusicCast feature... and the next day when I turned on the unit [Internal Error] na lumabas sa display.

What I did was unplugged all connections, pero same result. I tried downloading the previous firmware version 1.60 and execute USB update (PureDirect+Power button), it verified the firmware version 1.60...

but in the end another error appeared. [ERROR! 4000]

Since the unit was bought from the US so NO more warranty. I searched the internet regarding this error and found this german website: http://dsrocker.bplaced.net/internal-error-yamaha-rx-v671-rx-v673-fix/
and thought same series naman sila so there will be a chance na same board din ginamit ni Yamaha and referred to schematic diagram which is BOTTOM VIEW of the Circuit Board:

Found IC89 and just followed the steps according to the website and looked for the component pad to be solder bridged.

plugged the unit and it displays [No Model Info]. Looks like the latest firmware didn't recognized the model info of the unit.

I pressed Scene button "TV" until [*RX-A810] appears and pressed STRAIGHT button to confirm and the "*" disappears.

Power off, unplug and removed the solder bridge.

Plug it in and it runs normal again! Just like no error happened. The firmware was reset to Version 1.60 again.

New firmware update notifies me again but I think I will not upgrade to the new firmware until it has been published in Yamaha Aventage support site.
http://download.yamaha.com/search/detail/?language=en&site=usa.yamaha.com&asset_id=63909&category_id=16622&product_id=1556662&1441003766

dts_hdma · « **Reply #3873 on:** Aug 31, 2015 at 06:21 PM »

Galing! Congrats!

bhenard · « **Reply #3874 on:** Sep 05, 2015 at 07:56 AM »

Buti pinagtyagaan mo sir,...although it's not mine.parang diko matanggap na it's just put into waste.
congrats sir!

stratix2 · « **Reply #3875 on:** Sep 06, 2015 at 03:33 AM »

Recent Yamaha user here (RXV-679) from Denon 3802 user back home. Soon upgrading to RXA 850 or 1040 as I sent my 679 home for my cousin to enjoy. Yamaha RXV series is a great receiver all in all (wala lang pre-out yung 679) so i let it go. Ipon konti for the Aventage series.

alx · « **Reply #3876 on:** Sep 06, 2015 at 06:40 AM »

Quote from: egzbuen on Mar 05, 2015 at 08:32 AM

Thanks for the tip buddy. The YPAO indeed adjusted my fronts to large so set it to small after reading some reviews. Still wasn't getting enough LFE as YPAO set it to -6db. So I adjusted it to -2db which ok now.

The YPAO correctly measured though the distances of all the speakers. Its probably the acoustics of the room the made it hard for the YPAO to calibrate it.

sir what model is ur amp? and ur sub? my aventage rx-a2000 ypao set the sub to 0. i adjusted it to +3 using pb1000.

alx · « **Reply #3877 on:** Sep 09, 2015 at 11:02 AM »

guys, pwede bang ma adjust ang crossover setting ng sub sa yamaha aventage rx-a2000?

chrisP23 · « **Reply #3878 on:** Oct 10, 2015 at 07:33 AM »

Looking for trusted Yamaha dealer.please send me PM. Thank you.

airborne03 · « **Reply #3879 on:** Oct 14, 2015 at 09:06 AM »

Hi, hope someone can help me with my RX-471. It's 3 years old and just yesterday it started turning on and off on its own. I have it plugged into a 110V outlet while on stand by, other than this it seems to be working ok. Any thoughts or suggestions are welcome. Btw, I bought my unit online on Amazon so no warranty, and if needed, I'm willing to pay to have it serviced. Thanks to those who can help.

jhelenz · « **Reply #3880 on:** Oct 14, 2015 at 01:42 PM »

sa Banawe ko pinagawa yung Yamaha ko dati, forgot the name of the store. are you using avr? pansin ko lang sa mga Yamaha receivers prone sila magkaganyan (on off automatically) pag diretso sa outlet. 2 Yamaha receivers ko dati ganyan naging problema pero nung ginamitan ko ng avr hindi na naulit yung problem

airborne03 · « **Reply #3881 on:** Oct 14, 2015 at 04:09 PM »

^ Sige, try ko muna siya ikabit sa avr, it's an easy fix if ganyan. Hope it works, thanks for the suggestion too.

bebot santos · « **Reply #3882 on:** Oct 16, 2015 at 12:33 AM »

Please help, i have an rxv2077, kanina nabuhusan ng juice ng anak ko, pinatuyo ko agad , magagamit ko ba ito? Tia!

dts_hdma · « **Reply #3883 on:** Oct 16, 2015 at 07:49 AM »

sayang naman... as much as possible wag muna i-ON. Be sure na dry na talaga. Pwede din bugahan siguro ng contact cleaner, manlalagkit kasi yung dried juice. $:-\$

nelcarol1994 · « **Reply #3884 on:** Oct 16, 2015 at 08:26 AM »

Quote from: bebot santos on Oct 16, 2015 at 12:33 AM

Please help, i have an rxv2077, kanina nabuhusan ng juice ng anak ko, pinatuyo ko agad , magagamit ko ba ito? Tia!

Open it and let it dry maybe using fan. Do not connect anything on it if you want to test after you dry it. Yup contact cleaner is one of the best to get rid of the sticky juice spilled on the board!

bebot santos · « **Reply #3885 on:** Oct 16, 2015 at 10:50 PM »

Safe din ba ang contact cleaner even sa IC , cap, Transformer na nakakabit dun?

zonks · « **Reply #3886 on:** Oct 17, 2015 at 05:04 AM »

http://www.amazon.com/Hosa-Cable-Deoxit-Contact-Cleaner/dp/B00006LVEU/ref=pd_bxgy_263_2?ie=UTF8&refRID=1GW15VVV0HKJRD49RQZ2

Onkyo606 · « **Reply #3887 on:** Oct 18, 2015 at 07:58 PM »

Quote from: jhelenz on Oct 14, 2015 at 01:42 PM

sa Banawe ko pinagawa yung Yamaha ko dati, forgot the name of the store. are you using avr? pansin ko lang sa mga Yamaha receivers prone sila magkaganyan (on off automatically) pag diretso sa outlet. 2 Yamaha receivers ko dati ganyan naging problema pero nung ginamitan ko ng avr hindi na naulit yung problem

Audiworld po yung store na nasa banawe

bebot santos · « **Reply #3888 on:** Oct 25, 2015 at 10:13 PM »

Quote from: nelcarol1994 on Oct 16, 2015 at 08:26 AM

Open it and let it dry maybe using fan. Do not connect anything on it if you want to test after you dry it. Yup contact cleaner is one of the best to get rid of the sticky juice spilled on the board!

After having it cleaned and dry. In won't power. (Sigh)

airborne03 · « **Reply #3889 on:** Nov 03, 2015 at 11:17 PM »

As suggested above, I tried plugging mine into an avr, wala, ganun pa din. Will be bringing it to be repaired then.

zram18 · « **Reply #3890 on:** Nov 03, 2015 at 11:32 PM »

maybe its time to upgrade soon....

airborne03 · « **Reply #3891 on:** Nov 04, 2015 at 04:02 PM »

I'm not that hardcore an audiophile, I only have a modest set-up in a bedroom. If it comes to it, I'd rather upgrade my speaker system. Fingers crossed my avr get's repaired. =)

jamesknava · « **Reply #3892 on:** Nov 26, 2015 at 11:18 PM »

amazon black friday deal of the day today -- RX-V677

zram18 · « **Reply #3893 on:** Nov 26, 2015 at 11:26 PM »

how much sir? just curious.

jamesknava · « **Reply #3894 on:** Dec 04, 2015 at 04:21 PM »

Quote from: zram18 on Nov 26, 2015 at 11:26 PM

how much sir? just curious.

299USD.
back to 379 today.
i didnt buy because of the one consistent issue cited in customer reviews.

Jun_P · « **Reply #3895 on:** Dec 09, 2015 at 12:59 PM »

My RXV-357 is dead

it won't power on. I'll check the back later today, might be a busted fuse(?)...

Any tips on what could have caused this, and what to look for? The AVR is connected directly to an outlet.

comet · « **Reply #3896 on:** Dec 09, 2015 at 01:06 PM »

try another power cord sir

Jun_P · « **Reply #3897 on:** Dec 09, 2015 at 01:12 PM »

Quote from: comet on Dec 09, 2015 at 01:06 PM

try another power cord sir

di ata napapalitan power cord nun? Correct me if I'm wrong..

comet · « **Reply #3898 on:** Dec 09, 2015 at 01:15 PM »

oo nga akala ko pwedeng tanggalin

Jun_P · « **Reply #3899 on:** Dec 09, 2015 at 01:20 PM »

^anything else to check?