Author Topic: PSB SPEAKERS OWNER SPEAKS OUT... (Read 242092 times)

zram18 · « **Reply #1410 on:** Mar 10, 2016 at 12:56 PM »

posted na sir today sa marketplace yung x2T

nomedigas1030 · « **Reply #1411 on:** Mar 16, 2016 at 11:21 PM »

any difference if its bi-wired? or not needed?

thanks

too jazzy cool · « **Reply #1412 on:** Mar 17, 2016 at 12:08 PM »

Quote from: nomedigas1030 on Mar 16, 2016 at 11:21 PM

any difference if its bi-wired? or not needed?

thanks

try it out and find out

.

sientobente · « **Reply #1413 on:** Mar 17, 2016 at 02:33 PM »

In my experience, bi-wired doesn't do anything much specially on PSB speakers.

rexFi · « **Reply #1414 on:** Mar 17, 2016 at 05:23 PM »

me i have not tried bi-wiring <-- i was discouraged by Otep in Watts.

Changing the Interconnects with the same material as my speaker wire made a difference instead.
^ based on what I hear...

meat_eater · « **Reply #1415 on:** Mar 17, 2016 at 10:40 PM »

Sayang discontinued na symchrony, ndi ko na inabutan....

Now considering getting an imagine B or Imagine T for pure stereo..... Hehehe

armymanhaha · « **Reply #1416 on:** Mar 17, 2016 at 11:49 PM »

Dami pa naman synchrony sa mga shops. May Synch One pa sa Spectra. Last time I checked, meron Synch Two sa Watts.

sientobente · « **Reply #1417 on:** Mar 18, 2016 at 12:21 AM »

Quote from: rexFi on Mar 17, 2016 at 05:23 PM

me i have not tried bi-wiring <-- i was discouraged by Otep in Watts.

Changing the Interconnects with the same material as my speaker wire made a difference instead.
^ based on what I hear...

actually bi-amping makes a difference, but not necessarily better. bi-wiring wala talaga :p

nomedigas1030 · « **Reply #1418 on:** Mar 18, 2016 at 01:06 AM »

ok will cross bi-wriring out,

kung magpapalit kaya ako ng mejo magandang speaker wire will it make a difference?

im currently using a standard 12 awg speaker wires.

not that im not satisfied with how psb speaker sounds, they are awesome. napakalinis ng tunog at buong buo, some say x2ts lacks sa high frequency but for me being a jazz, classic, norah jones types of music listener its perfect. medyo relaxing at laid back. ayoko ng maingay

kung mag qed na speaker ako gaganda pa kaya ang tunog?

salamat po sa inputs

too jazzy cool · « **Reply #1419 on:** Mar 18, 2016 at 08:05 AM »

the qeds are very detailed speaker cables. the entry level is kinda "fast" while the more expensive revelation (? ? tama ba.. been quite a while, forgot na). is a bit more relaxed and even more detailed.

try the entry level furutech at audioworld, for me detailed and quite a bit "sweet" and relaxed.

Icermad · « **Reply #1420 on:** Mar 18, 2016 at 06:28 PM »

Does it really make a difference? I mean the speaker wires.. because Im only using ordinary speaker wires.. I read here before na you can't really hear the difference?although not sure maybe technology has changed? Just wanna know para isama ko sa budget for future upgrade hehehe

mykel18 · « **Reply #1421 on:** Mar 18, 2016 at 10:54 PM »

Quote from: Icermad on Mar 18, 2016 at 06:28 PM

Does it really make a difference? I mean the speaker wires.. because Im only using ordinary speaker wires.. I read here before na you can't really hear the difference?although not sure maybe technology has changed? Just wanna know para isama ko sa budget for future upgrade hehehe

Yes try to change yours kahit mga entry level and hear the difference. Or if you can borrow then better para marinig mo muna

zram18 · « **Reply #1422 on:** Mar 18, 2016 at 11:04 PM »

Qed brand ang match ng psb speakers

Icermad · « **Reply #1423 on:** Mar 19, 2016 at 01:35 AM »

May seller ba satin dito? Or san makakabili?

thank you

sientobente · « **Reply #1424 on:** Mar 20, 2016 at 11:43 AM »

Watts Hifi carries QED interconnects and speaker wires. In my own opinion, interconnects has a higher impact than speaker wires based from my experience.

rexFi · « **Reply #1425 on:** Mar 21, 2016 at 10:38 AM »

^ time to save up on a QED then hehe

Edit: Dali ko pala makulam...

nomedigas1030 · « **Reply #1426 on:** Mar 22, 2016 at 09:45 PM »

hello, for onkyo receiver which has no small or large settings for the speakers, should i put my fronts at 40Khz? or full?

thanks

meat_eater · « **Reply #1427 on:** Mar 22, 2016 at 11:12 PM »

Quote from: nomedigas1030 on Mar 22, 2016 at 09:45 PM

hello, for onkyo receiver which has no small or large settings for the speakers, should i put my fronts at 40Khz? or full?

thanks

40 Khz is rather high, did you mean hz?

40 hz on the other hand is rather low, and with endtry to mid level AVRS, assuming you have floor standers, the current delivery might not be enough. If you have a sub, I suggest 80-100 hz, then cross your sub to do 80-120 hz down...

nomedigas1030 · « **Reply #1428 on:** Mar 22, 2016 at 11:22 PM »

Quote from: meat_eater on Mar 22, 2016 at 11:12 PM

40 Khz is rather high, did you mean hz?

40 hz on the other hand is rather low, and with endtry to mid level AVRS, assuming you have floor standers, the current delivery might not be enough. If you have a sub, I suggest 80-100 hz, then cross your sub to do 80-120 hz down...

oww sorry I meant 40 hz, i have an onkyo txnr646 and the psb x2ts

thanks

meat_eater · « **Reply #1429 on:** Mar 22, 2016 at 11:51 PM »

Quote from: nomedigas1030 on Mar 22, 2016 at 11:22 PM

oww sorry I meant 40 hz, i have an onkyo txnr646 and the psb x2ts

thanks

If you have a subwoofer, try using 80 hz for your fronts, 80 for the center, 100 for the surrounds. Leave the lfe duties for the sub (80-120 hz).

Try this setting if it suits your taste, if not, feel free to experiment on what suits you best.

Cheers

nomedigas1030 · « **Reply #1430 on:** Mar 23, 2016 at 12:00 AM »

Quote from: meat_eater on Mar 22, 2016 at 11:51 PM

If you have a subwoofer, try using 80 hz for your fronts, 80 for the center, 100 for the surrounds. Leave the lfe duties for the sub (80-120 hz).

Try this setting if it suits your taste, if not, feel free to experiment on what suits you best.

Cheers

ok thank you for your response sir, as i dont have any idea about it at all. will try this.

thanks

sientobente · « **Reply #1431 on:** Mar 23, 2016 at 11:13 AM »

Quote from: rexFi on Mar 21, 2016 at 10:38 AM

^ time to save up on a QED then hehe

Edit: Dali ko pala makulam...

I actually would recommend Van Den Hul master rather than QED. Mas audible ang change when you compare lets say their entry level C5 vs a more expensive 3T.

splerdu · « **Reply #1432 on:** Apr 22, 2016 at 05:07 PM »

Quote from: armymanhaha on Mar 17, 2016 at 11:49 PM

Dami pa naman synchrony sa mga shops. May Synch One pa sa Spectra. Last time I checked, meron Synch Two sa Watts.

Spectra in Glorietta?

armymanhaha · « **Reply #1433 on:** Apr 23, 2016 at 02:24 AM »

Quote from: splerdu on Apr 22, 2016 at 05:07 PM

Spectra in Glorietta?

Yes sir. Sa tabi nung buffet place.

rexFi · « **Reply #1434 on:** May 07, 2016 at 11:30 AM »

Hello ulit sa Speaker stand eg. Sabre wood vs metal. May factor ba sya sa sound quality?

TIA

nomedigas1030 · « **Reply #1435 on:** May 17, 2016 at 08:43 PM »

ganda ng imagine t3...

zram18 · « **Reply #1436 on:** May 18, 2016 at 08:46 AM »

imagine t3 is too pricey at almost $4,000 dollars...

sientobente · « **Reply #1437 on:** May 18, 2016 at 10:57 PM »

Quote from: rexFi on May 07, 2016 at 11:30 AM

Hello ulit sa Speaker stand eg. Sabre wood vs metal. May factor ba sya sa sound quality? TIA

I think depende sa dispersion ng sound coming from the speaker, if it goes well beyond 180 degrees up, sound would interact differently on metal vs wood. But I think that is rare. The reason lang why Sabre wood stands are more expensive is because it offers less unwanted resonance because of it's weight plus the fact metal seems like a more solid build.

zram18 · « **Reply #1438 on:** May 19, 2016 at 08:28 AM »

wood vs metal stand. i cant hear the difference in sound quality, its too minimal.

advantage ng metal pag may malikot na tsikiting or aso/pusa,mahirap itumba. metal stand is more on safety reasons and aesthetics.

rexFi · « **Reply #1439 on:** May 19, 2016 at 06:27 PM »

Yeh nagSabre WS3 76" na ko with Faber Castell Tack It...

masaya naman so far.