Author Topic: Wharfedale diamond 10 series (Read 109763 times)

misteryoso · « **Reply #450 on:** Nov 06, 2013 at 01:07 AM »

Ask ko lang mga master ano kaya mas ok 10.2 or 9.3 for front...50/50 na movies & music..

Suggest lang po kyo mga master..

Curent set up:
Amp - AVR Sony DA3ES
Front - aaudio genesis 1st gen.when get a new front BS i move to surround
Center - Wharf 9CS after to buy front BS plan to upgrade 9CM
Sub - Performance Teknique 12inch by pilyo+amp4v2

Questions:ok lang po ba ang combination ng amp ko at speakers? ma ooverkill na ba yung front ko kung 9.3? wala yata ko nakikita dito na gumagamit ng avr na sony bakit kaya puro onkyo,denon,hk,pioneer ang user dito..
ito specs & reviews of my avr:
http://www.ebay.com/ctg/Sony-STR-DA3ES-6-1-Channel-600-Watt-Receiver-/46556465

Baka meron me gusto magsell ng 9.3 diyan or 10.2 pm me..

TIA...

marfin · « **Reply #451 on:** Nov 19, 2013 at 06:30 PM »

Quote from: makoy128 on Nov 03, 2013 at 12:07 AM

pa revive lang sir ng thread...

I have a pioneer vsx 923k and currently choosing between the 155 + 102c or 10.5 + 10CS to replace my existing front stage. Surrounds are wh-2 so I figured baka pwede pa yan.

I'm a 50/50 HT/audio guy and whenever I listen to audio I go for pop alternative and r&b. Room to power is around 24 sqm2.

I'm planning to get subs to satisfy my bass needs.

Ano yun noticeable difference between the 2 combos?

Just got my vsx-522 paired with 155, all i can say i think i wont be needing for a subwoofer

Im very happy with the upgrade comming from HTIB.

royc · « **Reply #452 on:** Dec 02, 2013 at 12:49 PM »

Anyone who knows the screw size for the 10.1 mounting holes? Planning to build a stand for it.

markcrenz · « **Reply #453 on:** Dec 02, 2013 at 12:53 PM »

did you check the manual?

royc · « **Reply #454 on:** Dec 02, 2013 at 04:43 PM »

Quote from: markcrenz on Dec 02, 2013 at 12:53 PM

did you check the manual?

It doesn't mention the bolt size. It just stated that the rear panel has a threaded insert for attaching a pair of suitable wall brackets. I'm thinking of buying several bolts and testing them but I am worried of possible thread damage to the mounting holes.

markcrenz · « **Reply #455 on:** Dec 03, 2013 at 09:42 AM »

iirc the 9.1 uses 6mm bolt. you can start with that size.

Edit: 16mm -->> 6mm, sorry

royc · « **Reply #456 on:** Dec 03, 2013 at 02:48 PM »

Quote from: markcrenz on Dec 03, 2013 at 09:42 AM

iirc the 9.1 uses 16mm bolt. you can start with that size.

Thanks for this!

markcrenz · « **Reply #457 on:** Dec 03, 2013 at 03:11 PM »

Quote from: royc on Dec 03, 2013 at 02:48 PM

Thanks for this!

Edit: 16mm -->> 6mm, sorry

bale pag bibili ka sabihin mo M6, ex. M6 x 20 for a 6mm dia, 20mm long bolt

royc · « **Reply #458 on:** Dec 03, 2013 at 04:54 PM »

Quote from: markcrenz on Dec 03, 2013 at 03:11 PM

Edit: 16mm -->> 6mm, sorry

bale pag bibili ka sabihin mo M6, ex. M6 x 20 for a 6mm dia, 20mm long bolt

Thanks so alam na nila pag M6. Minsan ang liit ng label sa screws ang hirap basahin ng matandang tulad ko hehe. Medyo mahaba ang kukunin ko coz sa kahoy ko ikakabit.

Yungfu · « **Reply #459 on:** Dec 19, 2013 at 11:55 AM »

Good day mga sirs! Haha..
Curious lang po, a store here in cebu is selling the diamond 10.7 for 23k, discounted price. Kita ko sa amazon, $1299 yun doon, roughly 55k. Bakit ang mura dito sa atin?

Balak ko kasi kumuha ng pair to replace my 10.1. Receiver ko ay pioneer vsx 922, sana ok to.

misterdd · « **Reply #460 on:** Dec 20, 2013 at 08:57 PM »

Mga gurus,

HT newbie po ako.

Need recommendations sana on which model ang good match sa yamaha RXV367.

Feeling ko hindi gaano malakas ang output nito and worried ako mahirapan sya with diamonds, tama ba?

weezur · « **Reply #461 on:** Jan 07, 2014 at 06:59 PM »

Quote from: Yungfu on Dec 19, 2013 at 11:55 AM

Good day mga sirs! Haha..
Curious lang po, a store here in cebu is selling the diamond 10.7 for 23k, discounted price. Kita ko sa amazon, $1299 yun doon, roughly 55k. Bakit ang mura dito sa atin?

Balak ko kasi kumuha ng pair to replace my 10.1. Receiver ko ay pioneer vsx 922, sana ok to.

Can I ask which store here in Cebu? Thanks!

egzbuen · « **Reply #462 on:** Jan 08, 2014 at 11:31 AM »

best place to audition Wharfs nowadays, not to mention competitive pricing?

iconlord · « **Reply #463 on:** Jan 08, 2014 at 05:02 PM »

Quote from: egzbuen on Jan 08, 2014 at 11:31 AM

best place to audition Wharfs nowadays, not to mention competitive pricing?

sa spectra po sir

egzbuen · « **Reply #464 on:** Jan 08, 2014 at 05:05 PM »

Quote from: iconlord on Jan 08, 2014 at 05:02 PM

sa spectra po sir

Can you shoot me a PM for their digits and location, cheers.

ngek2x · « **Reply #465 on:** Feb 12, 2014 at 02:04 AM »

Question lang po.
current setup ko is 10.1 , sw150 , 10cs
ano po magandang iupgrade to improve movie experience sa current setup ko?
1) 10.1 to 10.2?
2) 10cs to 10cm?
3) change sub?

(plan ko pala bumili ng dfs para sa surround)

egzbuen · « **Reply #466 on:** Apr 19, 2014 at 08:52 PM »

Hi,

To the wharfedale 10.1 owners, how did you mount it or install it as surround speakers, can you please share some pix as well, thanks.

Due to limited space in the room, speaker stands are out of the question for now, FYI. Thanks.

Nelson de Leon · « **Reply #467 on:** Apr 19, 2014 at 09:43 PM »

Quote from: egzbuen on Apr 19, 2014 at 08:52 PM

Hi,
To the wharfedale 10.1 owners, how did you mount it or install it as surround speakers, can you please share some pix as well, thanks.
Due to limited space in the room, speaker stands are out of the question for now, FYI. Thanks.

Madaming wall mounts available sa Ace hardware. Meron nag-grip sa base ng speakers. There's also the brand carried by the same distro of polk audio.

egzbuen · « **Reply #468 on:** Apr 20, 2014 at 10:41 AM »

Quote from: Nelson de Leon on Apr 19, 2014 at 09:43 PM

Madaming wall mounts available sa Ace hardware. Meron nag-grip sa base ng speakers. There's also the brand carried by the same distro of polk audio.

Thanks buddy Nelson, will check them out over at Ace.

Was looking at the the clamps being sold in GH and I find it a little bit hard to use with 10.1' considering the shapre of the 10.1, not being exactly square-ish. No problems I reckon with the 100 series since its plain square in shape.

Anyone with 10.1's who utitilized its OEM holes found at the back for bracket installation?

Finally, I am still confused if:

1. If should go with the 10 series or the 100 series
2. If I should go same BS for the front and rears or just use surrounds for the rear like DFS

Thanks

Gino · « **Reply #469 on:** Apr 20, 2014 at 12:01 PM »

Pwede ka pa fabricate para sakto sa wish mo. Kausapin mo si Turbokiller. May mga welding enthusiast din sa cab1net group ni timber.

Noong nag DIY ako ng driving sim, bumili ako steel sa Tandang Sora st. Near Mindanao Ave. At the other end naman may welding shop. To go this route, ikaw dapat tututok or mag finish. Otherwise pangit tignan.

royc · « **Reply #470 on:** Apr 20, 2014 at 07:23 PM »

I'm also interested on how to utilize the mounting holes of the 10.1. Yung nakita ko sa ace hindi kaya ang weight ng 10.1.

[dcw]aaron · « **Reply #471 on:** May 06, 2014 at 12:14 PM »

anyone who owns this Wharfedale Diamond HCP? any reviews on these speakers? mura na kasi sya for a set eh..good for starters na ba? planning to pair it with a yamaha avr.

egzbuen · « **Reply #472 on:** May 07, 2014 at 08:32 AM »

Quote from: [dcw]aaron on May 06, 2014 at 12:14 PM

anyone who owns this Wharfedale Diamond HCP? any reviews on these speakers? mura na kasi sya for a set eh..good for starters na ba? planning to pair it with a yamaha avr.

I've read reviews here at PDVD saying that Wharfes pair well with Yammys. Since I had in mind these speakers and/or AAudio, I got a brand new Yammy few weeks back for my new condo.

Just reading more reviews now to decide which speakers to get.

[dcw]aaron · « **Reply #473 on:** May 07, 2014 at 11:39 PM »

yes that's what i also read here..but i am more concerned with the performance of those speakers if they are great for their price..coz it's already a cheap set.

ngek2x · « **Reply #474 on:** Jun 04, 2014 at 05:00 PM »

Quote from: egzbuen on Apr 20, 2014 at 10:41 AM

Thanks buddy Nelson, will check them out over at Ace.

Was looking at the the clamps being sold in GH and I find it a little bit hard to use with 10.1' considering the shapre of the 10.1, not being exactly square-ish. No problems I reckon with the 100 series since its plain square in shape.

Anyone with 10.1's who utitilized its OEM holes found at the back for bracket installation?

Up ko lang po yung question ni egzbuen.
same scenario kami.

merdenoms · « **Reply #475 on:** Aug 07, 2014 at 10:24 PM »

saan pwede magparepair ng wharfedale 10.1 na may popping sound? parang may pumuputok kasi e =)

coastal · « **Reply #476 on:** Aug 07, 2014 at 10:31 PM »

http://www.pinoydvd.com/index.php/topic,41169.0.html

FASTBACK · « **Reply #477 on:** Apr 06, 2015 at 08:39 PM »

Just bought the diamond 10.3 and the diamond 10.CS

Love listening these speakers.

Hatredcopter · « **Reply #478 on:** Jan 23, 2016 at 03:55 AM »

Any suggestions on which would better match my diamond 10.1 fronts as a center?

Diamond 9.CS or Diamond 101C

Could no longer find any available Diamond 10.CS sadly

zram18 · « **Reply #479 on:** Jan 24, 2016 at 09:27 PM »

sir, i read that its the wharfedale 200 series center which has similar sound signature with the wharfedale 10 series so it might be a good fit.

others also tell that wharfedale diamond 220 is the upgrade of the wharfe 10.2, not the one from the wharfe 100 series.

but i have not tried it side by side coz wharfe 10 series are no longer in circulation.