Topic: Measy X6 Users & Support Thread

[leanreagan]

Good day mga sirs,

I have a problem with my Measy X6, everytime I turn on the device it always on opens on initial setup screen. Also, the device returns to factory settings.

Thanks in advance.

[garfield03]

Good day!

 
We've released a new FW for our model E8HDL and X6 with RTD 1185 chipset.

New fw feature is DLNA function, so customer can play their iPhone, or Android phone videos, music and photos through media player on TV screen conveniently.

 

Please download the new FW from the following link:

http://www.sendspace.com/file/wo06zg
 

[raider125jeigh]

Good day!

 
We've released a new FW for our model E8HDL and X6 with RTD 1185 chipset.

New fw feature is DLNA function, so customer can play their iPhone, or Android phone videos, music and photos through media player on TV screen conveniently.

 

Please download the new FW from the following link:

http://www.sendspace.com/file/wo06zg
 

wowowee...


update na mga papa at ng makabasa ng review hehehe

[gunslinger]

Question folks. Will the measy x6 work in the US given that it has a power adaptor that says 100-240V input? I was thinking it should work similar to laptops where any input within the range is allowable and will work.

Thanks in advance.

[Alfie]

Yes. In fact you can use a universal laptop adaptor (110/220); just set it to 12V and tape to secure; presently, I'm using the cheap 580pesos universal laptop adaptor from CDR-King and I just kept the original for future use.

Laptop adaptors have higher (4.5amp) compared to the usual 1.5-2amp stock power supply that comes with these media players.

[toys4geeks]

Question folks. Will the measy x6 work in the US given that it has a power adaptor that says 100-240V input? I was thinking it should work similar to laptops where any input within the range is allowable and will work.

Thanks in advance.

It will work. Most  power adaptors are autovolt 100V - 240V and if you closer, its also 50Hz~60Hz. Yung NMT ko na hindi measy, works everytime pag viaje.

[gunslinger]

It will work. Most  power adaptors are autovolt 100V - 240V and if you closer, its also 50Hz~60Hz. Yung NMT ko na hindi measy, works everytime pag viaje.

Thanks Jim. Just arrived. I will plug it in later when I get to the hotel. Buti pala nadala ko yung X6 na binili ko sayo. Will now have time to catch up on my movie backlog.

[gunslinger]

Oh well. The X6 actually work but the player have handshake issues with the TV. It will display the Measy screen when it boots up but it will eventually get a no signal screen after. I will have to find out how to fix this. The good news is there are great HD channels on cable.

[raider125jeigh]

my measy x6 still working great... bought last oct to sir JIM
updated fw 2.05 ata
and i dont want to update to 3. something version hehe

[warmaster]

Oh well. The X6 actually work but the player have handshake issues with the TV. It will display the Measy screen when it boots up but it will eventually get a no signal screen after. I will have to find out how to fix this. The good news is there are great HD channels on cable.

happens also with me even connected to an AVR. sequence lang sa pag on LCD then AVR then Measy. happens with most HDMI connected devices naman so no biggie. just get to know the quirks of every component you own 

[toys4geeks]

Oh well. The X6 actually work but the player have handshake issues with the TV. It will display the Measy screen when it boots up but it will eventually get a no signal screen after. I will have to find out how to fix this. The good news is there are great HD channels on cable.

Try cycling the [TV mode button]

[gunslinger]

Got it to work on the TV in the living room.

[threx666]

mga sir ,

 ask ko lang po about my tita's measy X6 player kasi , hindi sya marecognize ng comp ko , simula kasi ng mabili to di pa  natry na lagyan uli ng movie e.

  nung binili kasi e may preloaded na movies na so ngayon balak ko lagyan na e try ko sya kabit thru USB in my laptop ata desktop e ayaw marecognize?tried it in both Win XP and Win7 system.but di tlaga sya marecognize e. pero if play ko yun movies e ok naman.

  will upgrading the firmware may help solve this kaya?

  any help po is greatly appreciated

[tech101]

Mga sir, im using Measy X6, my Logitech Wireless Touchpad keyboard (link below) does not work even if i plugin a wired keyboard.  Please help!

http://www.logitech.com/en-us/keyboards/keyboards/wireless-touch-keyboard-k400

[toys4geeks]

mga sir ,

 ask ko lang po about my tita's measy X6 player kasi , hindi sya marecognize ng comp ko , simula kasi ng mabili to di pa  natry na lagyan uli ng movie e.

  nung binili kasi e may preloaded na movies na so ngayon balak ko lagyan na e try ko sya kabit thru USB in my laptop ata desktop e ayaw marecognize?tried it in both Win XP and Win7 system.but di tlaga sya marecognize e. pero if play ko yun movies e ok naman.

  will upgrading the firmware may help solve this kaya?

  any help po is greatly appreciated

when you connect as USB slave, yung pang printer na cable ba to your PC.

it should at least see the device in disk management, albeit ext3 filesystem will not be recognized so check anong filesystem ng disk?

[threx666]

when you connect as USB slave, yung pang printer na cable ba to your PC.

it should at least see the device in disk management, albeit ext3 filesystem will not be recognized so check anong filesystem ng disk?

Un supplied na USB 3.0 na cable na kulay blue un ginagamit ko pagkinakabit ko sya sa PC sir tama po ba ?

  Thanx po sa quick reply sir

[toys4geeks]

Un supplied na USB 3.0 na cable na kulay blue un ginagamit ko pagkinakabit ko sya sa PC sir tama po ba ?

  Thanx po sa quick reply sir

correct cable, do you see the device in disk manager/disk management of windows? if yes, download Ext2FS to be able to recognize the disk with ext2 partition but do set it at read-only  when it mounts the disk.

[threx666]

hi sir,

   yeah it can be recognized po sya in Disk Manangement , ,already downloaded the  EXT2FS and already installed it na but i'm lost on how to set it at read only or how to mount it.hehehhee bit lost i think

  and also when viewing My Computer it it is still not shown as an external disk. and how do i transfer my movie files in if i can be able to mount it since its a read onl setting?

        sensya po talaga sir kung medyo SSLLOOWWW pick up ako sir ha kinda new to this ext2 system , my AC Ryan kasi is its directly recognized as an external disk e.


   thanx po uli sir toys4geeks

[toys4geeks]

there are actually 4 programs to do this:

http://tombuntu.com/index.php/2008/03/19/four-applications-for-accessing-ext3-partitions-from-windows/

if its your first time with ext2, just use : http://www.fs-driver.org/ the site has good help

HTH

hi sir,

   yeah it can be recognized po sya in Disk Manangement , ,already downloaded the  EXT2FS and already installed it na but i'm lost on how to set it at read only or how to mount it.hehehhee bit lost i think

  and also when viewing My Computer it it is still not shown as an external disk. and how do i transfer my movie files in if i can be able to mount it since its a read onl setting?

        sensya po talaga sir kung medyo SSLLOOWWW pick up ako sir ha kinda new to this ext2 system , my AC Ryan kasi is its directly recognized as an external disk e.


   thanx po uli sir toys4geeks

[markwonnder]

wowowee...


update na mga papa at ng makabasa ng review hehehe

it bricked my measy x6.  haaaay.... anyone who can help?

[markwonnder]

Good day!

 
We've released a new FW for our model E8HDL and X6 with RTD 1185 chipset.

New fw feature is DLNA function, so customer can play their iPhone, or Android phone videos, music and photos through media player on TV screen conveniently.

 

Please download the new FW from the following link:

http://www.sendspace.com/file/wo06zg
 

how do i revert it back to my previous firware (3.05)? new fw bricked my x6. i can hear the internal HDD spinning, but no LCD display on the front panel and it's not showing any display on the TV. i already pressed the reset button on the back of the x6 to no avail. i also unplugged and re-plugged the power cable and nothing seems to help. i don't know what happened... it says "installation completed" and then turned off. after that, good bye measy x6. need help please. thanks!

[warmaster]

how do i revert it back to my previous firware (3.05)? new fw bricked my x6. i can hear the internal HDD spinning, but no LCD display on the front panel and it's not showing any display on the TV. i already pressed the reset button on the back of the x6 to no avail. i also unplugged and re-plugged the power cable and nothing seems to help. i don't know what happened... it says "installation completed" and then turned off. after that, good bye measy x6. need help please. thanks!

it's supposed to turn back on by itself. medyo matagal pero kailangan antayin mo

[markwonnder]

it's supposed to turn back on by itself. medyo matagal pero kailangan antayin mo

i left it overnight, pero wala talaga. nawala yung mga lights sa front panel.

[markwonnder]

it's supposed to turn back on by itself. medyo matagal pero kailangan antayin mo

i left it overnight, pero wala talaga. nawala yung mga lights sa front panel. it's working as an external HDD if you plug it in to a computer, so physically ok pa sya.

[garfield03]

i left it overnight, pero wala talaga. nawala yung mga lights sa front panel. it's working as an external HDD if you plug it in to a computer, so physically ok pa sya.

Flash it by a stable firmware. http://www.measy.com.cn/download/showdownload46_en.htm

Place this fw in usb flash drive root directory..plug then press n hold reset button. until installation start to run. then release the holding.

[markwonnder]

Flash it by a stable firmware. http://www.measy.com.cn/download/showdownload46_en.htm

Place this fw in usb flash drive root directory..plug then press n hold reset button. until installation start to run. then release the holding.

i already downloaded the 3.05 FW and transferred it to my USB flash root directory. i plugged the USB flash drive and then the power cable. i pressed and held the reset button for 1-2 minutes (or so) and nothing is happening. i dont see anything on the tv screen or any LCD on the front panel. i already tried the .rar and .img file of the FW in the root directory to no avail. i can just hear the internal HDD spinning. it's connected to my TV using HDMI cable, btw.

[garfield03]

i already downloaded the 3.05 FW and transferred it to my USB flash root directory. i plugged the USB flash drive and then the power cable. i pressed and held the reset button for 1-2 minutes (or so) and nothing is happening. i dont see anything on the tv screen or any LCD on the front panel. i already tried the .rar and .img file of the FW in the root directory to no avail. i can just hear the internal HDD spinning. it's connected to my TV using HDMI cable, btw.

DId you first hold on the reset button before powering the unit? another thing is you try connect to AV in rather than hdmi in while installing.

[markwonnder]

DId you first hold on the reset button before powering the unit? another thing is you try connect to AV in rather than hdmi in while installing.

tried it. didn't work. tried usb drive formatted as fat and fat32 with the .img in the root directory.

[raider125jeigh]

anyone got the fw for measy x6 2.05

i will try 3.05 fw later....hehe..just incase i want to revert u have it...

thanks

[garfield03]

anyone got the fw for measy x6 2.05

i will try 3.05 fw later....hehe..just incase i want to revert u have it...

thanks

I have it. I'll send to you incase you need it...