Topic: calibrated 42x20, service menu, with pics

[scorpionzero]

Kinakabahan ako . Baka magkamali ako sa navigation. So, adjustments ng values are on the volume +/- buttons lang di ba?? Navigation is by 1,2,3,4 buttons lang? 

yeps

[CocoBoy]

Nagawa ko na kagabi but i really have been using cinema +cool. parang di ko type yung warm kahit adjusted na yung values sa suggested.  Probably because my eyes are tired already. try ko uli.

[scorpionzero]

Nagawa ko na kagabi but i really have been using cinema +cool. parang di ko type yung warm kahit adjusted na yung values sa suggested.  Probably because my eyes are tired already. try ko uli.

switch back and forth para macompare mo sya, pause mo yung screen you`ll notice the whites are cleaner and skintones looks nicer.

[seph1018]

don't have the same model Panny...but this thread made me a fan of the Warm picture mode.

Thanks guys...

[bosschix]

To check your hours on your Panny plasma, do the following (NOTE: THIS TASK REQUIRES YOU GO INTO THE SERVICE MENU. DO NOT CHANGE ANY SETTINGS OR YOU MAY PERMANENTLY SCREW UP YOUR TV!!):

* Hold down the {VOL -} button ON THE PLASMA.
* Press the {INFO} button on the remote control 3 times.
* The Service Menu will be displayed with the following menus:
o ADJUST
o WD-ADJUST
o OPTION
o AGING (Red Screen)
o RM-SET
o SRV-TOOL
The {1} & {2} buttons move through menus (up/down).
* Press the {2} button once or press the {1} button six times to select "SRV-TOOL".
* Then press the {OK} button to access it.
* Using the cursor keys, * highlight * the empty right side of the last option: PTCT :00.00.00.00.00
* Then press and hold the {MUTE} button for 3 seconds.
* Time and Count will be displayed in red color.
TIME = Hours and minutes of operation.
COUNT = Times the Plasma was powered on.
* To exit, press and hold the {POWER} button on the Plasma for few seconds.

[jiggs84]

where is the INFO button on the remote control?

TIA...

[miccollo]

Thanks for this.

Just did the calibration with my panny X20 and I must say, I was highly satisfied with my TV before, now it looks even more awesome! 

thanks bro for sharing this!

[snobol68]

tried this on my pana 42x30 and love the difference. One problem though is that I lost the paper where I wrote the default values for this:
CINEMA, WARM:
R drv ??
G drv ??
B drv ??
R cut 80
G cut 80
B cut 80

Can anyone help me?please PM or post the default settings for these values. Need this for future reference. TIA and God Bless!

[scorpionzero]

im glad you guys liked it laki ng difference noh. hehe

dun sa default values ng x30, i wish i can help you pero not so sure kung same ng values ang x20 sa x30.

[bosschix]

tried this on my pana 42x30 and love the difference. One problem though is that I lost the paper where I wrote the default values for this:
CINEMA, WARM:
R drv ??
G drv ??
B drv ??
R cut 80
G cut 80
B cut 80

Can anyone help me?please PM or post the default settings for these values. Need this for future reference. TIA and God Bless!

R drv FF
G drv F5
B drv B5
R cut 80
G cut 80
B cut 80

[snobol68]

R drv FF
G drv F5
B drv B5
R cut 80
G cut 80
B cut 80

GREAT!

Many Thanks for this!