Author Topic: 2017 New Old Stuff setup (Read 127742 times)

Nelson de Leon · « **Reply #450 on:** Jul 02, 2013 at 05:55 PM »

Quote from: ndotcom on Jul 02, 2013 at 08:15 AM

Yes busog na si Harbie ko, airy sya like ko yung highs and mids niya, sa bass malambot dito ako nakukulangan parang mas ok pa pag si epos m12 ko nakakabit. Try ko muna iba't ibang cables ko dito plus BTL drivers, and di pa breakin yung mundorfs ng preamp.

Bro Nelson may xlr module din ba ice amp mo? Sana ma side by side natin to sa setup mo one day..

Bro Darwin may share ako sayo Musta ANs mo ano na nakakabit na amp? Sarap dyan 2A3,300B or 845,211 na SET amp

Yes. may XLR module pero mono lang kasi single amp lang ako.

May 2A3 poweramp si Trod93.

ATJr. · « **Reply #451 on:** Jul 02, 2013 at 07:27 PM »

norman, ano na balita kay mang rey? gawa na yung box?

me binubuong 2A3 at 845 yang si norman, tahimik lang...

ndotcom · « **Reply #452 on:** Jul 03, 2013 at 08:02 AM »

Quote from: ATJr. on Jul 02, 2013 at 07:27 PM

norman, ano na balita kay mang rey? gawa na yung box?

me binubuong 2A3 at 845 yang si norman, tahimik lang...

Sir Tony last week sabi Linggo, ala pa rin ako balita sa ngayon...sinabihan ko na patapos na gawa ko at next na yung 2A3 so follow-up ko ulit this week.

redstarrising · « **Reply #453 on:** Jul 03, 2013 at 12:32 PM »

congrats brod norms ! sa bagong DIY

, yes!!! 2A3 upakan na para yun career listening path going to set and high frequency horn type hehe.

ndotcom · « **Reply #454 on:** Jul 04, 2013 at 08:05 PM »

Quote from: redstarrising on Jul 03, 2013 at 12:32 PM

congrats brod norms ! sa bagong DIY , yes!!! 2A3 upakan na para yun career listening path going to set and high frequency horn type hehe.

hehe iba type ng horns gusto ko na malabo mangyari at wala ko paglalagyan...

Nelson de Leon · « **Reply #455 on:** Jul 04, 2013 at 08:41 PM »

Quote from: ndotcom on Jul 04, 2013 at 08:05 PM

hehe iba type ng horns gusto ko na malabo mangyari at wala ko paglalagyan...

Kapag nakita mo yun mga horns ni Trod93, nakow!

ATJr. · « **Reply #456 on:** Jul 05, 2013 at 07:14 AM »

norman, kung nakita mo yung horns ni lovejbl, nakow...hanep....

Nelson de Leon · « **Reply #457 on:** Jul 05, 2013 at 08:59 AM »

Quote from: ATJr. on Jul 05, 2013 at 07:14 AM

norman, kung nakita mo yung horns ni lovejbl, nakow...hanep....

Nakow. Meron na bang bago?

ndotcom · « **Reply #458 on:** Jul 05, 2013 at 09:13 AM »

Hay nakow mga master, yan nga mga horns na tukoy ko at pangarap nalang yan hanggat di nanalo ng lotto

Kasi kailangan malaki space dyan so need ko bahay muna

Sarap tignan mga pics nyang mga yan sa kabila, pati mga nasa US sites

ATJr. · « **Reply #459 on:** Jul 05, 2013 at 10:12 AM »

Quote from: Nelson de Leon on Jul 05, 2013 at 08:59 AM

Nakow. Meron na bang bago?

dati pa yan, nasa california na sa states, kasama nung 16kt88 triode pp amp na ginawa ko at mga kt88 sets na gawa ni rolly vicencio.....

raider125jeigh · « **Reply #460 on:** Jul 05, 2013 at 02:03 PM »

Quote from: ndotcom on Jul 02, 2013 at 09:39 AM

Naku brader magulo dito bahay at may makulit, mas maganda dyan sa inyo tambay next akyat ni Derrick punta na talaga ko promise...

Text ka lang punta dito then tuloy natin sa bahay mo hehehe

nice nice ...sureness yan ah hahaha malaya mo bukas or lingo lol

ndotcom · « **Reply #461 on:** Jul 22, 2013 at 05:18 PM »

My B1 clones retazo style case, kasi kung ano lang mapulot na bakal basta makabuo lang ng box...

Power supply on the left side, used 1A trafo from deeco, 7818/7918 regulators for +/- 18Vdc. +18VDC on B1 clones and +/- 18Vdc for XLR converter on the right side. 3inputs 2 output(switchable RCA or XLR).

Eto na sila finally singing and I like the pairing, B1 clones on top and b&0 icepower below using Canare cables and ordinary XLR connectors. Bass is so good and mid and highs are smooth, di ko akalain ganito pala class d amp.

ndotcom · « **Reply #462 on:** Jul 22, 2013 at 05:27 PM »

Pending project, another Class D amp using 8950th chip, powered up and tested for a couple of CDs and liked it too.

This I hope will be good for the AN's out there, will try to test/audition when finished. It has onboard volume pot na so input selector nalang and will not incorporate an active preamp, will decide if going to use the onboard LED VU meter as well, casing will be 6X4X12 inches.

ndotcom · « **Reply #463 on:** Jul 22, 2013 at 05:34 PM »

This is a 2nd board of B1 clones, waiting for FETs and using Vishay and ERO coupling capacitors(could be mundorfed). Will have this powered by laptop adapters and optional 2x9V battery.

≧◉◡◉≦xrampage≧◉◡◉≦ · « **Reply #464 on:** Jul 22, 2013 at 05:41 PM »

Quote from: ndotcom on Jul 22, 2013 at 05:18 PM

My B1 clones retazo style case, kasi kung ano lang mapulot na bakal basta makabuo lang ng box...

Power supply on the left side, used 1A trafo from deeco, 7818/7918 regulators for +/- 18Vdc. +18VDC on B1 clones and +/- 18Vdc for XLR converter on the right side. 3inputs 2 output(switchable RCA or XLR).

Eto na sila finally singing and I like the pairing, B1 clones on top and b&0 icepower below using Canare cables and ordinary XLR connectors. Bass is so good and mid and highs are smooth, di ko akalain ganito pala class d amp.

Test na sa dynes ni derick yan.. haha

ndotcom · « **Reply #465 on:** Jul 23, 2013 at 07:18 AM »

Quote from: xrampage on Jul 22, 2013 at 05:41 PM

Test na sa dynes ni derick yan.. haha

Kelan yan? Dito ka pa pala, kala ko nakalipad ka na kasi parati ka online at ala pa magawa sa US

≧◉◡◉≦xrampage≧◉◡◉≦ · « **Reply #466 on:** Jul 23, 2013 at 07:20 AM »

Quote from: ndotcom on Jul 23, 2013 at 07:18 AM

Kelan yan? Dito ka pa pala, kala ko nakalipad ka na kasi parati ka online at ala pa magawa sa US

Wala din naman ako magawa sa antipolo kaya lagi online. Wala pa date ng lipa kasi antay pa visa.

Nagpunta kami kina louie and mangboy last sat.

Nelson de Leon · « **Reply #467 on:** Jul 23, 2013 at 07:39 AM »

Quote from: ndotcom on Jul 23, 2013 at 07:18 AM

Kelan yan? Dito ka pa pala, kala ko nakalipad ka na kasi parati ka online at ala pa magawa sa US

Kayang kaya niyan ang BS na Dynes.

ndotcom · « **Reply #468 on:** Jul 23, 2013 at 08:12 AM »

Promising din yung TDA8950TH @ 100Wpc into 4ohms kaya drive yung Dynes na yan, sarap making ngayon makulimlim.

ATJr. · « **Reply #469 on:** Jul 23, 2013 at 09:55 AM »

aba, kailangan pala mabuo na rin ung isa....
a bigger heatsink imho and you can drive that
TDA8950TH @ 100Wpc into 4ohms even harder,
and also bigger power traffo at least good for 500VA...

nga pala Norman, dinala na ni mang rey yung box para sa caps....

Nelson de Leon · « **Reply #470 on:** Jul 23, 2013 at 10:55 AM »

Quote from: ATJr. on Jul 23, 2013 at 09:55 AM

aba, kailangan pala mabuo na rin ung isa....
a bigger heatsink imho and you can drive that
TDA8950TH @ 100Wpc into 4ohms even harder,
and also bigger power traffo at least good for 500VA...

nga pala Norman, dinala na ni mang rey yung box para sa caps....

Sa PSU ba yun heatsink?

ATJr. · « **Reply #471 on:** Jul 23, 2013 at 11:00 AM »

yung amp mismo...

ndotcom · « **Reply #472 on:** Jul 23, 2013 at 01:28 PM »

Quote from: ATJr. on Jul 23, 2013 at 09:55 AM

aba, kailangan pala mabuo na rin ung isa....
a bigger heatsink imho and you can drive that
TDA8950TH @ 100Wpc into 4ohms even harder,
and also bigger power traffo at least good for 500VA...

nga pala Norman, dinala na ni mang rey yung box para sa caps....

Sir Tony may fan pa yang heatsink kaso hanap ko pa saan ikakabit supply niya. Nabanggit ni mang Rey nga na inabot na sa inyo yang box, di ko pa masimulan pero andito na mga bakal ng 2A3. Ala pa lahat ng kailangan para dun kahit sokets man lang, mukhang kasya naman sa 14x12 inches so baka yan pagawa ko chasis.

Quote from: Nelson de Leon on Jul 23, 2013 at 10:55 AM

Sa PSU ba yun heatsink?

Sir Nelson sa chip(8950th) mismo yung heatsink, incorporated na power supply so transformer nalang kailangan which is mas mura kesa mag smps. May mga available naman online na incorporated na smps sa amp like icepower din.

banesto · « **Reply #473 on:** Jul 23, 2013 at 02:40 PM »

HI!

ATJr. · « **Reply #474 on:** Jul 23, 2013 at 02:57 PM »

Quote from: ndotcom on Jul 23, 2013 at 01:28 PM

Sir Tony may fan pa yang heatsink kaso hanap ko pa saan ikakabit supply niya. Nabanggit ni mang Rey nga na inabot na sa inyo yang box, di ko pa masimulan pero andito na mga bakal ng 2A3. Ala pa lahat ng kailangan para dun kahit sokets man lang, mukhang kasya naman sa 14x12 inches so baka yan pagawa ko chasis.

meron akong 4pin sockets...

ndotcom · « **Reply #475 on:** Jul 23, 2013 at 04:47 PM »

Quote from: banesto on Jul 23, 2013 at 02:40 PM

HI!

Ka Ernie mustamos...why o why di ka natuloy sa USA? Eh di bago na ulit setup mo nyan kung napakawalan mo na yung mga dati mo.

ndotcom · « **Reply #476 on:** Jul 23, 2013 at 04:49 PM »

Quote from: ATJr. on Jul 23, 2013 at 02:57 PM

meron akong 4pin sockets...

Sige sir Tony reserve mo na sakin 2, hanap ako iba pa...

banesto · « **Reply #477 on:** Jul 25, 2013 at 09:00 PM »

Quote from: ndotcom on Jul 23, 2013 at 04:47 PM

Ka Ernie mustamos...why o why di ka natuloy sa USA? Eh di bago na ulit setup mo nyan kung napakawalan mo na yung mga dati mo.

Mahabang kwento sis.....bka magalit skin ang mods pag dito ko ikwento hehehehe...... Tinubos ko sa utol ko
yung a907. 555esj cdp, b&w 602.

ndotcom · « **Reply #478 on:** Jul 29, 2013 at 10:02 AM »

Quote from: ndotcom on Jul 22, 2013 at 05:27 PM

Pending project, another Class D amp using 8950th chip, powered up and tested for a couple of CDs and liked it too.

This I hope will be good for the AN's out there, will try to test/audition when finished. It has onboard volume pot na so input selector nalang and will not incorporate an active preamp, will decide if going to use the onboard LED VU meter as well, casing will be 6X4X12 inches.

Almost finished...cosmetics nalang, will still use my WIP's(Wyred Inspired Pream/amP) look

VU meter attached and functioning, maganda rin wala lang time to change LED colors and used the default ones. San kaya makabili pa ng mga square/flat leds na gamit dito?

Tsnad · « **Reply #479 on:** Jul 29, 2013 at 10:08 AM »

ganda naman....