This firmware is not for the x7 it is for other device that has the same hardware. it has being tested and it does work on the x7 the only known issue is that the remote control does not work. i have added here a possible solution to fix the remote controler issue.
download:
http://www.mirrorcreator.com/files/JZGTTWXV/update.zip_linksi hope this can help x7 community.
1 -root the x7 it with z4root application . (it was allready posted here in this thread)
webpage:
http://forum.xda-developers.com/showthread.php?t=8339534zroot download:
http://forum.xda-developers.com/attachment.php?attachmentid=446145&d=12903413282 - install "Es file explorer"
webpage:
http://www.apktops.com/es-file-explorer-1-6-1-1.htmldownload:
http://dl.apktops.com/app/201202/ES_File_Explorer_1.6.1.1.apk3 - open Es explorer and configure to be root and mount /system as R/W
howto: ES file explorer go to settings scroll down, at the end you will see Root Settings with 2 options Root explorer and Mount File System check both.
4 - go to directory /system/etc/ there you will find a file called remote.conf make a back up of the file.
5 - edit the file.
get to the following lines and comment all of them.
#amlogic NEC remote new ir_rca_newpic
#new keyboard
factory_code = 0xfe010001
work_mode = 1
repeat_enable = 1
release_delay = 150
debug_enable = 1
reg_control = 0xfbe40
key_begin
0x0F 11
0x42 2
0x0e 113
0x10 4
0x07 5
0x40 6
0x0b 7
0x1D 8
0x16 9
0x1A 10
0x09 97
0x04 15
0x45 14
0x0d 103
0x05 108
0x0a 105
0x08 106
0x5B 48
0x57 46
0x54 32
0x19 125
0x00 104
0x02 109
0x06 102
0x0c 119
0x67 122
0x1c 123
0x14 120
0x15 121
0x01 116
key_end
to comment them you only need to add the Symbol # in the first character of the line.
example:
#amlogic NEC remote new ir_rca_newpic
#new keyboard
#factory_code = 0xfe010001
#work_mode = 1
#repeat_enable = 1
#release_delay = 150
#debug_enable = 1
#reg_control = 0xfbe40
#key_begin
# 0x0F 11
# 0x42 2
# 0x0e 113
# 0x10 4
# 0x07 5
# 0x40 6
# 0x0b 7
# 0x1D 8
# 0x16 9
# 0x1A 10
# 0x09 97
# 0x04 15
# 0x45 14
# 0x0d 103
# 0x05 108
# 0x0a 105
# 0x08 106
# 0x5B 48
# 0x57 46
# 0x54 32
# 0x19 125
# 0x00 104
# 0x02 109
# 0x06 102
# 0x0c 119
# 0x67 122
# 0x1c 123
# 0x14 120
# 0x15 121
# 0x01 116
#key_end
Then un comment the following lines like im showing you.
#amlogic NEC remote (this line should be keept commented)
factory_code = 0x40400001
work_mode = 1
repeat_enable = 0
release_delay = 150
debug_enable = 1
reg_control = 0xfbe40
key_begin
0x00 11
0x01 2
0x02 3
0x03 4
0x04 5
0x05 6
0x06 7
0x07 8
0x08 9
0x09 10
0x0d 97
0x0B 103
0x0E 108
0x10 105
0x11 106
0x45 15
0x13 125
0x42 102
0x40 119
0x41 132
0x15 104
0x1c 109
0x43 113
0x1f 123
0x1e 122
0x4d 116
key_end
6 - Then SAVE and exit.
7 reboot the device.
if you have luck you will be able to make the remote work.
------------------
The other way you can do this is:
(you have to have the x7 rooted)
1 - download the file:
http://www.mirrorcreator.com/files/0KNK1RJW/remote.conf_links2 - back up the original file on /system/etc/remote.conf
3 - copy the downloaded file tinto /system/etc
4 - chage the attributes from the new file as it was in the original file.
5 - reboot the media player.