Topic: Bedroom Theater/Audio Room by L.I.S

[GuyChan]

Dre, parating ka pa ng madaming Blu's para magamit ko ng husto mga gears...salamat sa NIRVANA!

Will post new arrivals by tomorrow. Thanks!

[GuyChan]

Bro yun mga order ko na Cd and Blu's kelan dadating? excited ako...hehehehe

Ordered makakapiling mo na din sila soon!

[jjohnc]

Ordered makakapiling mo na din sila soon!

Ang saraaap naman dude...

[defcon3]

katumbas na nyan gamit ko bosing, may sukli pa....

congrats!!!!

Transparent Premium Series Ultra Balance Interconnect Upgrade 2013...anak ng *&%#% butas nanaman bulsa . Para akong bumuli ng ng isang speaker... hahahaha

[DTNS]

JL Fathoms yung subs sa pic, tama ba sir? 

[jh@meeh]

Naka dual Fathom F113 din si boss john..

[jjohnc]

Naka dual Fathom F113 din si boss john..

yup..i am going for quad or 6 f113 pag lipat ko ng bahay dre, na pansin mo may XLR splitters na naka abang? kulang pa ng 1 pair para sa 6 na subs if ever or gagamitan ko ng crossover pero hindi advisable sabi ni Barry designer ng fathoms...para may rear subs..hehehe pero matagal pa wala pang bahay hahahahaha

[jh@meeh]

6 fathom eh....adik ka ba? 

Triple gotham kaya?

Wicked!!

[jjohnc]

6 fathom eh....adik ka ba? 

Triple gotham kaya?

Wicked!!

bro, better than gotham dre, according to Barry its better to use 6 boxes, woofers and amp, para ma tune individually...hindi nag sisiksikan sa isang kahon 2 woofers and sharing one amp (gotham)...sa kanya ako nag papa design/turo kung ano magandang gawin...ADIK hehehe

[jh@meeh]

Okay yan kung medyo malaki ang room, 40sqm minimum?
Dedicated power line din dapat at may bass tamer ka like antimode dspeaker.
Tapos lagyan mo ng transducer mga theater seat! San ka pa!

[jjohnc]

Okay yan kung medyo malaki ang room, 40sqm minimum?
Dedicated power line din dapat at may bass tamer ka like antimode dspeaker.
Tapos lagyan mo ng transducer mga theater seat! San ka pa!

dre, it will still be a bedroom setup enjoy ako pag naka higa...iba audio ko look at my other thread...

[jjohnc]

katumbas na nyan gamit ko bosing, may sukli pa....

congrats!!!!

kaw naman dre...kayang kaya mo toh...

[jjohnc]

I Am Choosing Power Amps for Mono Operation 7.2 operations.
3 Three pieces Monoblocks
2 Two pieces stereo
 
needs you thoughts mga Panyero...

Parasound Halo JC1



Link: http://www.parasound.com/halo/jc1.php
   
Premier monaural amplifier
Circuitry designed by legendary John Curl and CTC Builder
Ultra-high bias Class A/AB operation
Exclusive two position bias level adjustment
Balanced inputs with discrete circuits and XLR connectors
Vampire Direct gold-plated OFC RCA input
Dual heavy-duty 24k gold-plated 5-way speaker binding posts
Direct Coupled - no capacitors or inductors in signal path
Complementary MOSFET driver stage and JFET input stage
18 beta-matched 15 amp, 60 MHz bipolar output transistors
1.9 kVA encapsulated toroid power transformer
Independent power supplies for input, driver and output stages
18,000 µF filters for driver stage
132,000 µF Nichicon Gold Tune filters for output stage
DC Servo and relay protection circuits
REL and Nichicon Muse capacitors
Harris hyper-fast soft recovery diodes for all bridge rectifiers
Auto turn-on by 12v trigger or audio signal trigger
Ground lift switch , adjustable turn-on delay
4u Chassis with rear carry handles, rack mounting kit included
Premium detachable AWG 12 power cord with silver solder
THX Ultra2 certified
Parasound 5 year parts, 5 years labor warranty

Specs:

Continuous power output, 20Hz - 20 kHz:
400 watts RMS x 1, 8 Ω
800 watts RMS x 1, 4 Ω
1200 watts RMS x 1, 2 Ω

Class A power output, 20Hz - 20 kHz:
25 watts, bias set to high, 8 Ω
10 watts, bias set to low, 8 Ω

Current capacity:
135 amperes peak

Power bandwidth:
2 Hz - 120 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.15 % at full power

IM distortion: balanced 16 V rms
< 0.03 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.8 dB

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
100 k Ω

S/N ratio:
>120 dB, IHF A-weighted, bias set to high
>122 dB, IHF A-weighted, bias set to low

Damping factor:
> 1200 at 20 Hz

Power Requirement :
250 watts idle 1280 watts full power into 4 Ω

DC trigger output capacity :
+12 Vdc, 150 mA

Dimensions:
17-1/4" w x 7-5/8" h x 20 " d, 7 " h without feet

Net weight: 64 lb.

OR

Aragon Iridium



Link: http://www.aragonav.com/Iridium

The ultimate in amplification from Aragon, the Iridium is our new flagship Differential Monoblock Amplifier.  A natural evolution from its revered predecessor, the Palladium, two Iridiums form the heart of a serious 2-channel setup.

Inside and out, every detail has been precisely engineered to consistently deliver the ultimate in audio reproduction, year after year.  The Iridium is a natural choice to ensure you can hear the best performance a high-quality loudspeaker can deliver.

Aragon doesn't stop at high performance audio however.  Like all of our new models, the Iridium includes a state-of-the art network technology from Indy Audio Labs called E2C or "Enhanced Ethernet Control".   E2C presents each Aragon unit as a device on the home network which can be controlled and monitored for convenience and reliability.  With an Aragon E2C-enabled pre-amp as a companion, the complexity of highly capable audio separates starts to disappear.

While media standards may change every 6 months or so, Aragon owners can simply sit back, relax and enjoy years of trouble-free service from these highly coveted products.

Specs:

Specification    Primary Measurement    Secondary Measurement
power output    400W into 8 ohms, mono    600W into 4 ohms, mono
THD    <0.02%    <0.03%
frequency response    5Hz to 20kHz +0/-0.1dB    
tim/dim distortion    0.010%    
s/n    112dB,A-weighted    
damping factor    200, 8 @ 50Hz    
input sensitivity    1W: 60mV (SE & Balanced)    400W: 1.2V (SE & Balanced)
input impedance    15kohms (SE), 45k (bal)    
ethernet/RS-232    status & control of standby/on    
12V    standby/on control    
inputs    gold-plated, panel-mounted RCA jacks    XLR balanced jack
outputs    2 sets gold-plated, insulated speaker binding posts    
power consumption    standby: 1W idle: 120W    max: 1500W
physical    6.75''(17.1cm) x 19''(48.3cm) x 15''(38.1cm)    64lbs (29.2kg)
colors    
black or silver with satin anodized finish    
laser-etched logo
shipping carton    12'' (30.5cm) x 22''(55.9cm) x 24''(61cm)    
68lbs (30.8kg)

OR


Pass Labs 260.5



Link: https://passlabs.com/products/amplifiers/x.5/x260.5

Specs:

X260.5 260 Watt Class AB Mono
Favorite mono-block of the customer wishing a small compact amplifier, slightly more analytic than the other X.5 amps.

Fabulous main / center channel cinema amp where a premium is placed on speech articulation.

X260.5 / Specifications

Gain (db) 26 / 30   
Power Output /ch (8 ohm) 260
Power Output /ch (4 ohm)  520
Input Impedance,(Kohms)  30 / 20
Leaves Class A @ pk Watts  5
Power Consumption (W) 200   
Dimensions (W x H x D) 19 x 7 19.2
Unit Weight (LBS)    62
Ship Weight (LBS)    62   
Ship Weight (LBS)    75

[jjohnc]

I Am Choosing Power Amps for Mono Operation 7.2 operations.
3 Three pieces Monoblocks
2 Two pieces stereo
 
needs you thoughts mga Panyero...

Parasound Halo JC1



Link: http://www.parasound.com/halo/jc1.php
   
Premier monaural amplifier
Circuitry designed by legendary John Curl and CTC Builder
Ultra-high bias Class A/AB operation
Exclusive two position bias level adjustment
Balanced inputs with discrete circuits and XLR connectors
Vampire Direct gold-plated OFC RCA input
Dual heavy-duty 24k gold-plated 5-way speaker binding posts
Direct Coupled - no capacitors or inductors in signal path
Complementary MOSFET driver stage and JFET input stage
18 beta-matched 15 amp, 60 MHz bipolar output transistors
1.9 kVA encapsulated toroid power transformer
Independent power supplies for input, driver and output stages
18,000 µF filters for driver stage
132,000 µF Nichicon Gold Tune filters for output stage
DC Servo and relay protection circuits
REL and Nichicon Muse capacitors
Harris hyper-fast soft recovery diodes for all bridge rectifiers
Auto turn-on by 12v trigger or audio signal trigger
Ground lift switch , adjustable turn-on delay
4u Chassis with rear carry handles, rack mounting kit included
Premium detachable AWG 12 power cord with silver solder
THX Ultra2 certified
Parasound 5 year parts, 5 years labor warranty

Specs:

Continuous power output, 20Hz - 20 kHz:
400 watts RMS x 1, 8 Ω
800 watts RMS x 1, 4 Ω
1200 watts RMS x 1, 2 Ω

Class A power output, 20Hz - 20 kHz:
25 watts, bias set to high, 8 Ω
10 watts, bias set to low, 8 Ω

Current capacity:
135 amperes peak

Power bandwidth:
2 Hz - 120 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.15 % at full power

IM distortion: balanced 16 V rms
< 0.03 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.8 dB

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
100 k Ω

S/N ratio:
>120 dB, IHF A-weighted, bias set to high
>122 dB, IHF A-weighted, bias set to low

Damping factor:
> 1200 at 20 Hz

Power Requirement :
250 watts idle 1280 watts full power into 4 Ω

DC trigger output capacity :
+12 Vdc, 150 mA

Dimensions:
17-1/4" w x 7-5/8" h x 20 " d, 7 " h without feet

Net weight: 64 lb.

OR

Aragon Iridium



Link: http://www.aragonav.com/Iridium

The ultimate in amplification from Aragon, the Iridium is our new flagship Differential Monoblock Amplifier.  A natural evolution from its revered predecessor, the Palladium, two Iridiums form the heart of a serious 2-channel setup.

Inside and out, every detail has been precisely engineered to consistently deliver the ultimate in audio reproduction, year after year.  The Iridium is a natural choice to ensure you can hear the best performance a high-quality loudspeaker can deliver.

Aragon doesn't stop at high performance audio however.  Like all of our new models, the Iridium includes a state-of-the art network technology from Indy Audio Labs called E2C or "Enhanced Ethernet Control".   E2C presents each Aragon unit as a device on the home network which can be controlled and monitored for convenience and reliability.  With an Aragon E2C-enabled pre-amp as a companion, the complexity of highly capable audio separates starts to disappear.

While media standards may change every 6 months or so, Aragon owners can simply sit back, relax and enjoy years of trouble-free service from these highly coveted products.

Specs:

Specification    Primary Measurement    Secondary Measurement
power output    400W into 8 ohms, mono    600W into 4 ohms, mono
THD    <0.02%    <0.03%
frequency response    5Hz to 20kHz +0/-0.1dB    
tim/dim distortion    0.010%    
s/n    112dB,A-weighted    
damping factor    200, 8 @ 50Hz    
input sensitivity    1W: 60mV (SE & Balanced)    400W: 1.2V (SE & Balanced)
input impedance    15kohms (SE), 45k (bal)    
ethernet/RS-232    status & control of standby/on    
12V    standby/on control    
inputs    gold-plated, panel-mounted RCA jacks    XLR balanced jack
outputs    2 sets gold-plated, insulated speaker binding posts    
power consumption    standby: 1W idle: 120W    max: 1500W
physical    6.75''(17.1cm) x 19''(48.3cm) x 15''(38.1cm)    64lbs (29.2kg)
colors    
black or silver with satin anodized finish    
laser-etched logo
shipping carton    12'' (30.5cm) x 22''(55.9cm) x 24''(61cm)    
68lbs (30.8kg)

OR


Pass Labs 260.5



Link: https://passlabs.com/products/amplifiers/x.5/x260.5

Specs:

X260.5 260 Watt Class AB Mono
Favorite mono-block of the customer wishing a small compact amplifier, slightly more analytic than the other X.5 amps.

Fabulous main / center channel cinema amp where a premium is placed on speech articulation.

X260.5 / Specifications

Gain (db) 26 / 30   
Power Output /ch (8 ohm) 260
Power Output /ch (4 ohm)  520
Input Impedance,(Kohms)  30 / 20
Leaves Class A @ pk Watts  5
Power Consumption (W) 200   
Dimensions (W x H x D) 19 x 7 19.2
Unit Weight (LBS)    62
Ship Weight (LBS)    62   
Ship Weight (LBS)    75

to follow yung mga 2 two channels para sa surround

[stevesonk]

how about the Krell monoblocks sir..??
ung Krell FPB 350mcx..?!!     

[jh@meeh]

http://www.audioadvisor.com/products.asp?dept=157

Kung type mo lang i check...alam ko ayaw mo ng mura...

Bryston 7bsst2  600w monoblock
Bryston 14bsst2 600w stereo amp
 

[jjohnc]

http://www.audioadvisor.com/products.asp?dept=157

Kung type mo lang i check...alam ko ayaw mo ng mura...

Bryston 7bsst2  600w monoblock
Bryston 14bsst2 600w stereo amp
 

Dre, may 28Bsst2 of one of our members matinis para sa akin, na consider ko na...binebenta nya baka gusto mo...

[jjohnc]

Dremarried the 28Bsst2 of one of our members matinis para sa akin, na consider ko na...

Tingin namin Hindi bagay eh...And mga pala panaka least kong gusto McIntosh amps...

[raider125jeigh]

Kay sarap lage sumilip sa thread mo...nakakalula ung presyo hehe...sarap nyang 6 fathoms ..drool mode

[JoeyGS]

For theater and multi-channel application it has to be THX certified. For me, I would go for the Parasound.

Pass Labs will be warm sounding or tube sounding .... do you prefer this?

[♡ lvcdg23™ ✌]

How about Emotiva XPR-1?





Specifications

Topology: Fully discrete, quad differential, fully balanced, high current, short signal path Class A/B Differential Reference power amplifier with Optimized Class-H™ power supply topology.
Number of Channels: 1
Power Output
(rated power; THD < 0.1%):
1000 watts; into 8 Ohms.
1,750 watts into 4 Ohms.
Rated Power Bandwidth (at rated power; 8 Ohm load): 20 Hz to 20 kHz + /- 0.1 dB.
Minimum Recommended Load Impedance: 4 Ohms.
Frequency Response: 5 Hz to 80 kHz (+ 0 / - 3 dB).
THD + noise: < 0.0025%
Signal to Noise Ratio (8 Ohm load):
> 118 dB at rated power (A-weighted).
> 93 dB at 1 watt (A-weighted).
Damping Factor (8 Ohm load): > 1,000
Speaker Output Connections:
Super heavy-duty custom Emotiva speaker binding posts - with clear acrylic insulators and heavy duty gold plated contacts; designed to accept heavy-gauge bare cables, lugs, or banana plugs.
Power Supply:
2.5 kVA toroidal power transformer.
240,000 uF low ESR capacitor bank.
Input sensitivity (for rated power; 8 Ohm load): 3.5 V
Gain: 29 dB
Input Connections:
(1) RCA; unbalanced (audiophile quality, solid brass, machined, gold plated)
Balanced (XLR); one per channel.
(1) XLR; balanced
Input Impedance:
100k Ohms (unbalanced).
51k Ohms (balanced).
Trigger:
Trigger Input: 5 - 20 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 50 mA.
Power Requirements: 115 VAC or 230 VAC +/- 10% @ 50 / 60 Hz (user selectable).
The XPR-1 requires a 20 Amp circuit and standard IEC 20 Amp outlet (which is different than a 15 Amp outlet). If you don’t have a proper circuit and outlet. We recommend you have one installed by a qualified electrician. We recommend that the XPR-1 be plugged into its own dedicated 20 Amp circuit.
Protection: The XPR-1 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions. If a fault occurs the LED above the Standby button, and the Channel Status LED and the LED Bargraph Meter LEDs will flash red. Returning the XPR-1 to Standby or switching off the AC Power will reset the protection circuitry.
Dimensions:
unboxed: 17" wide x 9.5" high x 19.5" deep (includes feet and binding posts; requires additional 3-4" of depth clearance to accomodate the power cord).

[≧◉◡◉≦xrampage≧◉◡◉≦]

Wow sarap naman nahihirapan sa pagpili.. Panalo talaga sana ako din.. Congrats..

[resident_evil]

pwede na ata magtayo sir john ng maliit na sinehan e. yung kasya mga 20 to 30 people. tapos punta tayo. hehe.

[≧◉◡◉≦xrampage≧◉◡◉≦]

pwede na ata magtayo sir john ng maliit na sinehan e. yung kasya mga 20 to 30 people. tapos punta tayo. hehe.

Puwede..

[mykel18]

Pwede rin ito: 

Electrocompaniet AW400

Rated output power   
 
8 ohms 400
4 ohms 765
2 ohms 1010

[jh@meeh]

Sa bedroom nya lang lahat yan...c4.. ....6 na fathom.. ...san ka pa....

[jjohnc]

Pwede rin ito: 

Electrocompaniet AW400

Rated output power   
 
8 ohms 400
4 ohms 765
2 ohms 1010

uy, pwede din...will ask Erick L. sya distributor dito Pinas...thanks...

[jjohnc]

how about the Krell monoblocks sir..??
ung Krell FPB 350mcx..?!!     

Krell, pwede dami nga sa store trade-in, kaso PAK-TAY tayo sa kuryente, Krells run on class A..They leave class A at around 80 watts...lalo na yan FPB 350mcx meron ako nyan before and they sound really great but they run hot specially pag binobomba...

[jjohnc]

For theater and multi-channel application it has to be THX certified. For me, I would go for the Parasound.

Pass Labs will be warm sounding or tube sounding .... do you prefer this?

+100 sir...same thoughts...

[jjohnc]

Sa bedroom nya lang lahat yan...c4.. ....6 na fathom.. ...san ka pa....

hahaha yun fathoms na iba pag lipat ng bahay...baka palayasin ako dito sa condo hahahaha...