Topic: Bedroom Theater/Audio Room by L.I.S

[Nelson de Leon]

Krell, pwede dami nga sa store trade-in, kaso PAK-TAY tayo sa kuryente, Krells run on class A..They leave class A at around 80 watts...lalo na yan FPB 350mcx meron ako nyan before and they sound really great but they run hot specially pag binobomba...

Yun bagong flagship ng Jeff Rowland matipid ata sa kuryente.

[jjohnc]

Yun bagong flagship ng Jeff Rowland matipid ata sa kuryente.

Sir Nelson, pang theater use lang...Hindi makatarungan presyo ng Jeff Rowland hehehee

[♡ lvcdg23™ ✌]

Eto po boss John...
Sunfire Theater Grand Amplifier - TGA-7401

400 watts x 7 @ 8-Ohms

[jjohnc]

Eto po boss John...
Sunfire Theater Grand Amplifier - TGA-7401

400 watts x 7 @ 8-Ohms

Sir thanks for the advice Mono operation po ang gusto ko sir....

[jjohnc]

Ordered makakapiling mo na din sila soon!

thanks bro!..

[jjohnc]

I Am Choosing Power Amps for Mono Operation 5.2 operations.
3 Three pieces Monoblocks
2 Two pieces stereo
 
needs you thoughts mga Panyero...

Parasound Halo JC1



Link: http://www.parasound.com/halo/jc1.php
   
Premier monaural amplifier
Circuitry designed by legendary John Curl and CTC Builder
Ultra-high bias Class A/AB operation
Exclusive two position bias level adjustment
Balanced inputs with discrete circuits and XLR connectors
Vampire Direct gold-plated OFC RCA input
Dual heavy-duty 24k gold-plated 5-way speaker binding posts
Direct Coupled - no capacitors or inductors in signal path
Complementary MOSFET driver stage and JFET input stage
18 beta-matched 15 amp, 60 MHz bipolar output transistors
1.9 kVA encapsulated toroid power transformer
Independent power supplies for input, driver and output stages
18,000 µF filters for driver stage
132,000 µF Nichicon Gold Tune filters for output stage
DC Servo and relay protection circuits
REL and Nichicon Muse capacitors
Harris hyper-fast soft recovery diodes for all bridge rectifiers
Auto turn-on by 12v trigger or audio signal trigger
Ground lift switch , adjustable turn-on delay
4u Chassis with rear carry handles, rack mounting kit included
Premium detachable AWG 12 power cord with silver solder
THX Ultra2 certified
Parasound 5 year parts, 5 years labor warranty

Specs:

Continuous power output, 20Hz - 20 kHz:
400 watts RMS x 1, 8 Ω
800 watts RMS x 1, 4 Ω
1200 watts RMS x 1, 2 Ω

Class A power output, 20Hz - 20 kHz:
25 watts, bias set to high, 8 Ω
10 watts, bias set to low, 8 Ω

Current capacity:
135 amperes peak

Power bandwidth:
2 Hz - 120 kHz, +0/-3 dB at 1 watt

Total harmonic distortion:
< 0.15 % at full power

IM distortion: balanced 16 V rms
< 0.03 %

Slew rate:
> 130 V/µsecond

Dynamic headroom:
> 1.8 dB

Input sensitivity:
1 V for 28.28 V, THX Reference Level

Input impedance:
100 k Ω

S/N ratio:
>120 dB, IHF A-weighted, bias set to high
>122 dB, IHF A-weighted, bias set to low

Damping factor:
> 1200 at 20 Hz

Power Requirement :
250 watts idle 1280 watts full power into 4 Ω

DC trigger output capacity :
+12 Vdc, 150 mA

Dimensions:
17-1/4" w x 7-5/8" h x 20 " d, 7 " h without feet

Net weight: 64 lb.

OR

Aragon Iridium



Link: http://www.aragonav.com/Iridium

The ultimate in amplification from Aragon, the Iridium is our new flagship Differential Monoblock Amplifier.  A natural evolution from its revered predecessor, the Palladium, two Iridiums form the heart of a serious 2-channel setup.

Inside and out, every detail has been precisely engineered to consistently deliver the ultimate in audio reproduction, year after year.  The Iridium is a natural choice to ensure you can hear the best performance a high-quality loudspeaker can deliver.

Aragon doesn't stop at high performance audio however.  Like all of our new models, the Iridium includes a state-of-the art network technology from Indy Audio Labs called E2C or "Enhanced Ethernet Control".   E2C presents each Aragon unit as a device on the home network which can be controlled and monitored for convenience and reliability.  With an Aragon E2C-enabled pre-amp as a companion, the complexity of highly capable audio separates starts to disappear.

While media standards may change every 6 months or so, Aragon owners can simply sit back, relax and enjoy years of trouble-free service from these highly coveted products.

Specs:

Specification    Primary Measurement    Secondary Measurement
power output    400W into 8 ohms, mono    600W into 4 ohms, mono
THD    <0.02%    <0.03%
frequency response    5Hz to 20kHz +0/-0.1dB    
tim/dim distortion    0.010%    
s/n    112dB,A-weighted    
damping factor    200, 8 @ 50Hz    
input sensitivity    1W: 60mV (SE & Balanced)    400W: 1.2V (SE & Balanced)
input impedance    15kohms (SE), 45k (bal)    
ethernet/RS-232    status & control of standby/on    
12V    standby/on control    
inputs    gold-plated, panel-mounted RCA jacks    XLR balanced jack
outputs    2 sets gold-plated, insulated speaker binding posts    
power consumption    standby: 1W idle: 120W    max: 1500W
physical    6.75''(17.1cm) x 19''(48.3cm) x 15''(38.1cm)    64lbs (29.2kg)
colors    
black or silver with satin anodized finish    
laser-etched logo
shipping carton    12'' (30.5cm) x 22''(55.9cm) x 24''(61cm)    
68lbs (30.8kg)

OR


Pass Labs 260.5



Link: https://passlabs.com/products/amplifiers/x.5/x260.5

Specs:

X260.5 260 Watt Class AB Mono
Favorite mono-block of the customer wishing a small compact amplifier, slightly more analytic than the other X.5 amps.

Fabulous main / center channel cinema amp where a premium is placed on speech articulation.

X260.5 / Specifications

Gain (db) 26 / 30   
Power Output /ch (8 ohm) 260
Power Output /ch (4 ohm)  520
Input Impedance,(Kohms)  30 / 20
Leaves Class A @ pk Watts  5
Power Consumption (W) 200   
Dimensions (W x H x D) 19 x 7 19.2
Unit Weight (LBS)    62
Ship Weight (LBS)    62   
Ship Weight (LBS)    75

Just auditioned the Pass Labs yesterday, under power 260.5...hirap talagang e drive C4's, power hungry...so wala na sa listahan ang Pass Labs...

Last night naman I was talking to Acurus about the Iridium...medyo alanganin yun company na kakatakot customer support nila although matagal na sila sa industry...bago lang kasi management...so will see kung nasa Hong Kong show sila para ma audition...

[timber715]

John, looking forward to seeing the Dan D' Agustino amps on the coming hifi show.... I'm excited for you.

[jjohnc]

John, looking forward to seeing the Dan D' Agustino amps on the coming hifi show.... I'm excited for you.

Thanks bro...ako din excited na hahaha dami na nga nag iintay sa grupo hihiramin daw...yoko nga noh! hehehehe

[stevesonk]

Thanks bro...ako din excited na hahaha dami na nga nag iintay sa grupo hihiramin daw...yoko nga noh! hehehehe

sir john...!!! kpag dumating na pahimas ako...baka ma-tyan ako..
    

[jjohnc]

sir john...!!! kpag dumating na pahimas ako...baka ma-tyan ako..
    

ahahahahaha

[jjohnc]

I Am also considering Plinius SA-103, Anak ng Pating ang gwapo nito noh?!







Power:    125 watts RMS per channel into 8 ohms 220 watts RMS per channel into 4 ohms
                Both channels driven from 20Hz to 20kHz at less than 0.05% total harmonic

Mono Output: 400 watts RMS into 8 ohms, 730 watts RMS into 4 ohms, 20Hz to 20kHz
Frequency Response:    20Hz to 20kHz ±0.2dB 0dB at 1Hz and -3dB at 70kHz
Distortion:    Typically <0.05% THD at rated power 0.1% THD and IM worst case prior to clipping
Current Output:    50A short duration peak per channel
Fuse protected
Rise Time:    Typically 5µs
Hum & Noise:    100dB below rated output 20Hz to 20KHz, A weighted
Input Impedance:    47k ohms
Gain:    RCA Inputs: 32dB
Balanced Inputs: 38dB
Power/Current Consumption:    750VA
2.1A (485W) Class A Idle
0.4A (92W) Class AB Idle/Standby

Dimensions: Height: 220mm (8.75")
Width: 500mm (19.75")
Depth: 455mm (18")
Weight: 38kg (83lb)

[jjohnc]

I Am also considering Plinius SA-103, Anak ng Pating ang gwapo nito noh?!







Power:    125 watts RMS per channel into 8 ohms 220 watts RMS per channel into 4 ohms
                Both channels driven from 20Hz to 20kHz at less than 0.05% total harmonic

Mono Output: 400 watts RMS into 8 ohms, 730 watts RMS into 4 ohms, 20Hz to 20kHz
Frequency Response:    20Hz to 20kHz ±0.2dB 0dB at 1Hz and -3dB at 70kHz
Distortion:    Typically <0.05% THD at rated power 0.1% THD and IM worst case prior to clipping
Current Output:    50A short duration peak per channel
Fuse protected
Rise Time:    Typically 5µs
Hum & Noise:    100dB below rated output 20Hz to 20KHz, A weighted
Input Impedance:    47k ohms
Gain:    RCA Inputs: 32dB
Balanced Inputs: 38dB
Power/Current Consumption:    750VA
2.1A (485W) Class A Idle
0.4A (92W) Class AB Idle/Standby

Dimensions: Height: 220mm (8.75")
Width: 500mm (19.75")
Depth: 455mm (18")
Weight: 38kg (83lb)

Dalawa na lang pinag pipilian ko Parasound JC1 dedicated Mono or Plinius SA-103 bridged for mono operations...

[jh@meeh]

Isang Parasound sa front left at isang Plinius sa front right....Pinag iisipan pa ba yan? 

[jjohnc]

Isang Parasound sa front left at isang Plinius sa front right....Pinag iisipan pa ba yan? 

whaaaaaa naging CHOPSUY naman dre hahahahaha

[AppleMan]

^_Panabong yung DATING ng PLINIUS SA-103 pang-DERBY......

[jjohnc]

^_Panabong yung DATING ng PLINIUS SA-103 pang-DERBY......

Gands dre Barakong-barako itsura...

[bass_nut]

i think i saw Plinius SA-103 Class A amp somewhere 

[jjohnc]

i think i saw Plinius SA-103 Class A amp somewhere 

Pa hiram mo muna sa akion yan sa iyo para ma pakinggan hehehehe

[bass_nut]

Pa hiram mo muna sa akion yan sa iyo para ma pakinggan hehehehe

38 kgs siya brother John.. baka magka-hernia tayo sa kabubuhat 

bagay siya sa Dyns C4 or Dyns Evidence 

[jjohnc]

I just heard yesterday the Plinius Reference with Dynaudio Consequence ang ganda , it was a jaw dropping audition....

Coming Soon Three (3) pcs. Plinius SA-103 and P10 Power Amplifiers for 5.2 Operation

I Am also considering Plinius SA-103, Anak ng Pating ang gwapo nito noh?!







Power:    125 watts RMS per channel into 8 ohms 220 watts RMS per channel into 4 ohms
                Both channels driven from 20Hz to 20kHz at less than 0.05% total harmonic

Mono Output: 400 watts RMS into 8 ohms, 730 watts RMS into 4 ohms, 20Hz to 20kHz
Frequency Response:    20Hz to 20kHz ±0.2dB 0dB at 1Hz and -3dB at 70kHz
Distortion:    Typically <0.05% THD at rated power 0.1% THD and IM worst case prior to clipping
Current Output:    50A short duration peak per channel
Fuse protected
Rise Time:    Typically 5µs
Hum & Noise:    100dB below rated output 20Hz to 20KHz, A weighted
Input Impedance:    47k ohms
Gain:    RCA Inputs: 32dB
Balanced Inputs: 38dB
Power/Current Consumption:    750VA
2.1A (485W) Class A Idle
0.4A (92W) Class AB Idle/Standby

Dimensions: Height: 220mm (8.75")
Width: 500mm (19.75")
Depth: 455mm (18")
Weight: 38kg (83lb)

[jjohnc]

Coming Soon Plinius P10 for Surround

PRODUCT SPECIFICATIONS:

Power:    200 Watts RMS per channel into 8 ohms
                300 Watts RMS per channel into 4 ohms
Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion
Frequency Response:    20Hz to 20kHz ±2dB
-3dB at 5Hz and -3db at 70kHz
Distortion:    Typically <0.05% THD at rated power
0.2% THD and IM worst case prior to clipping
Current Output:    40A short duration per channel.
Fuse protected
Slewing:    50V/µs
Hum & Noise:    90dB below rated output 20Hz to 20kHz unweighted
Gain    RCA Inputs: 32dB
XLR Inputs: 38dB
Input Impedance:    47k ohms
Power/Current Consumption:    600VA
0.4A (92W) Class AB Idle
0.01A (2.3W) Standby
Dimensions:    Height: 120mm (4.75")
                        Width: 450mm (17.75")
                        Depth: 400mm (15.75")
Weight: 14kg (30lb)

[jjohnc]

^_Panabong yung DATING ng PLINIUS SA-103 pang-DERBY......

OO nga dre, pang world slashers dating hehehe

[jjohnc]

John, looking forward to seeing the Dan D' Agustino amps on the coming hifi show.... I'm excited for you.

Thanks bro...kelan tayo laro?

[jjohnc]

sir john...!!! kpag dumating na pahimas ako...baka ma-tyan ako..
    

hehehe parang babe ba...iatabi na lang sa pag tulog para ka yakap ahahaha

[timber715]

Thanks bro...kelan tayo laro?

Pilitin ko makita kayo sa monday aug12... Sana makatakas ako

[jjohnc]

Pilitin ko makita kayo sa monday aug12... Sana makatakas ako

Sige dre Kita kits...kaso may punit miniscus ko...nag the-therapy nga ako...problema ko nga itong Hong Kong show, Hiram na Hiram ako mag lakad bwisit nga eh...

[jjohnc]

38 kgs siya brother John.. baka magka-hernia tayo sa kabubuhat 

bagay siya sa Dyns C4 or Dyns Evidence 

Doc ayan na, decided na ko sa Plinius SA 103 bridge ko na lang para maging mono...si Alex yung naka Consequence naka Plinius Reference Series pinalitan nya yun Burmester monos..ang ganda...bagay talaga Plinius sa Dyns...

[♡ lvcdg23™ ✌]

Bro John....
Eto bagay sa Home Theater mo using the momentum amps

[jjohnc]

Bro John....
Eto bagay sa Home Theater mo using the momentum amps

Nice Dre...thanks for the info...sa Friday Hong Kong Show makakapili ako...most of the exhibitors Momentum gagamitin...but before the speakers Preamp Momentum muna kasi napakatagal ng waiting period nila almost 8-10 months masyado mitikuloso si Dan bago e ship out mga gamit (staka damatands na)...but its worth wait...yang mga speakers medyo mabilis u-morder karamihan may stock sila...

[raider125jeigh]

I just heard yesterday the Plinius Reference with Dynaudio Consequence ang ganda , it was a jaw dropping audition....

Coming Soon Three (3) pcs. Plinius SA-103 and P10 Power Amplifiers for 5.2 Operation

tulo laway ko dito dre...hahaha...ganda