Author Topic: AMX Tube Products (Read 719577 times)

s2kov · « **Reply #3570 on:** Nov 18, 2004 at 02:48 PM »

definitely 6550/kt88 my wish list

audioslave · « **Reply #3571 on:** Nov 18, 2004 at 03:43 PM »

almost everyone here crave for the "Power Kings"

15K for a push pull KT88/6550 power amp??

dream on

JojoD818 · « **Reply #3572 on:** Nov 18, 2004 at 03:52 PM »

Quote from: audioslave on Nov 18, 2004 at 03:43 PM

almost everyone here crave for the "Power Kings"

15K for a push pull KT88/6550 power amp??

dream on

i think that's free.

iceman90a · « **Reply #3573 on:** Nov 18, 2004 at 03:59 PM »

yup when we stop dreaming - we have given up

ito na yun eh... bawasan na lang ng:
- 1 rectifier
- 2 driver tubes
- 2 volume pots
- 1 led power indicator
- wood trim
- rotary power switch - gawin na lang toggle sa likod ilagay
- flat black or silver yung taas ng chassis
- front gawin brushed aluminum

ayos na! - less than 15k na yun

marty_e · « **Reply #3574 on:** Nov 18, 2004 at 05:20 PM »

P33,000 ba or P37,000 yung tag price sa upper right hand corner nung sign? Kaya yan for P15,000 without the tubes, Vince... Buy your own piece-meal as the money rolls in.

iceman90a · « **Reply #3575 on:** Nov 18, 2004 at 06:04 PM »

inggit kasi ako sa amp mo eh

how about this?

but without the input selector, volume knobs, power switch & led

Audioboy · « **Reply #3576 on:** Nov 19, 2004 at 10:47 AM »

Quote from: iceman90a on Nov 18, 2004 at 03:59 PM

yup when we stop dreaming - we have given up

ito na yun eh... bawasan na lang ng:
- 1 rectifier
- 2 driver tubes
- 2 volume pots
- 1 led power indicator
- wood trim
- rotary power switch - gawin na lang toggle sa likod ilagay
- flat black or silver yung taas ng chassis
- front gawin brushed aluminum

ayos na! - less than 15k na yun

baka isang channel nalang matira nyan

H a n $ · « **Reply #3577 on:** Nov 19, 2004 at 01:02 PM »

Quote from: Audioboy on Nov 19, 2004 at 10:47 AM

baka isang channel nalang matira nyan

15K baka OPT pa lang yan.. Hammond ata yan.

wanderlust · « **Reply #3578 on:** Nov 19, 2004 at 04:02 PM »

ganda tlga nyan, walang sabit ang dating............. hay dreaming im alweays dreaming......

Control · « **Reply #3579 on:** Nov 21, 2004 at 02:54 PM »

Quote from: wanderlust on Nov 19, 2004 at 04:02 PM

ganda tlga nyan, walang sabit ang dating............. hay dreaming im alweays dreaming......

Sir, There's no harm in dreaming....malay mo baka magka-tutoo.. eh di group buy kagad...

wanderlust · « **Reply #3580 on:** Nov 22, 2004 at 12:20 PM »

group buy na!!!

sayang at natuloy meeting of the minds last sat. hayyy, mukhang matatagal tayong mangangarap nito ah.

AMXTube · « **Reply #3581 on:** Nov 23, 2004 at 06:32 PM »

Ok Guys,

I got the message. You want power! KT88 is powerfull but is kinda expensive, perhaps the most expensive tetrode power tube today. The cheapest power pentode is the EL34 or 6L6GC, pushpull you can get max 40w per side, but the tubes are cheap about half the price of the KT88/6550. Driver tubes I suggest 9 pin types, there is plenty to choose from. Tube rectified, we can make that optional. For filter caps, to keep the price down we can use Rubicon and coupling caps mybe we can use " orange drops" . I will get back to you and see what figure i get. Basic power amp, black chassis, no volume controls, just 1 power switch, input sensitivity might be 2.8 volts, you will definetly need a preamp. So we will have 1 driver, 2 power tubes per channel, no negative feedback, optional tube rectifier. I guess this will be neat and simple. Till next posting, let me go to my drawing board, er my computer Tube CAd.

iceman90a · « **Reply #3582 on:** Nov 23, 2004 at 07:54 PM »

Sir,

sana silver body with brushed aluminum face - kahit walang tranny cover

thanks

Control · « **Reply #3583 on:** Nov 23, 2004 at 08:41 PM »

Quote from: AMXTube on Nov 23, 2004 at 06:32 PM

Ok Guys,

I got the message. You want power! KT88 is powerfull but is kinda expensive, perhaps the most expensive tetrode power tube today. The cheapest power pentode is the EL34 or 6L6GC, pushpull you can get max 40w per side, but the tubes are cheap about half the price of the KT88/6550. Driver tubes I suggest 9 pin types, there is plenty to choose from. Tube rectified, we can make that optional. For filter caps, to keep the price down we can use Rubicon and coupling caps mybe we can use " orange drops" . I will get back to you and see what figure i get. Basic power amp, black chassis, no volume controls, just 1 power switch, input sensitivity might be 2.8 volts, you will definetly need a preamp. So we will have 1 driver, 2 power tubes per channel, no negative feedback, optional tube rectifier. I guess this will be neat and simple. Till next posting, let me go to my drawing board, er my computer Tube CAd.

A million thanks for answering to our needs and wants Sir Andrew!

H a n $ · « **Reply #3584 on:** Nov 23, 2004 at 09:42 PM »

Control,

Uy UY tamang tama yan...

AMXtube,

Thanks tamang tama sa Christmas and New year yan..

s2kov · « **Reply #3585 on:** Nov 23, 2004 at 09:45 PM »

Sir,

Would this be using KT88/6550 for 15K?

Quote from: AMXTube on Nov 23, 2004 at 06:32 PM

So we will have 1 driver, 2 power tubes per channel, no negative feedback, optional tube rectifier. I guess this will be neat and simple.

kid · « **Reply #3586 on:** Nov 24, 2004 at 09:16 AM »

sana mura yung PP EL34

AMXTube · « **Reply #3587 on:** Nov 24, 2004 at 10:10 PM »

They say one cannot please everybody, but there is no harm in trying. With regards to the PP AMX amp project model 15k, I guess i can be flexible. I can come up with two colors silver or black chassis, brushed aluminum panel, silver or black that would be no problem. As for the power tubes it can be either El34 or KT88 with some minor changes under chassis, ie change of cathode bias resistor. Price target will change a bit with the KT88 driving it higher. But if you are buying it without tubes, price will be the same.
I am hurrying up my accountant so I can declare to you the price. But mind you it will look good but this is a strip model, less the bells and whistles. I am building the prototype after completing my design this week. I hope I can meet the price target you have set, for a minimum run of 10 units. Wish me luck

Control · « **Reply #3588 on:** Nov 25, 2004 at 06:19 AM »

Quote from: AMXTube on Nov 24, 2004 at 10:10 PM

They say one cannot please everybody, but there is no harm in trying. With regards to the PP AMX amp project model 15k, I guess i can be flexible. I can come up with two colors silver or black chassis, brushed aluminum panel, silver or black that would be no problem. As for the power tubes it can be either El34 or KT88 with some minor changes under chassis, ie change of cathode bias resistor. Price target will change a bit with the KT88 driving it higher. But if you are buying it without tubes, price will be the same.
I am hurrying up my accountant so I can declare to you the price. But mind you it will look good but this is a strip model, less the bells and whistles. I am building the prototype after completing my design this week. I hope I can meet the price target you have set, for a minimum run of 10 units. Wish me luck

Good Luck Sir Andrew!

Superman · « **Reply #3589 on:** Nov 25, 2004 at 10:54 AM »

Quote from: AMXTube on Nov 24, 2004 at 10:10 PM

They say one cannot please everybody, but there is no harm in trying. With regards to the PP AMX amp project model 15k, I guess i can be flexible. I can come up with two colors silver or black chassis, brushed aluminum panel, silver or black that would be no problem. As for the power tubes it can be either El34 or KT88 with some minor changes under chassis, ie change of cathode bias resistor. Price target will change a bit with the KT88 driving it higher. But if you are buying it without tubes, price will be the same.
I am hurrying up my accountant so I can declare to you the price. But mind you it will look good but this is a strip model, less the bells and whistles. I am building the prototype after completing my design this week. I hope I can meet the price target you have set, for a minimum run of 10 units. Wish me luck

good luck, sir AMXtube!...i'm sure you're going to make more members here tube-happy!

slayer · « **Reply #3590 on:** Nov 25, 2004 at 12:45 PM »

Na excite ako

Kaso kelangan talaga ng preamp. $:-\$

Superman · « **Reply #3591 on:** Nov 25, 2004 at 01:11 PM »

Quote from: slayer on Nov 25, 2004 at 12:45 PM

Na excite ako Kaso kelangan talaga ng preamp. $:-\$

try to ask kung pwede lagyan ng volume control...

wanderlust · « **Reply #3592 on:** Nov 25, 2004 at 01:11 PM »

good luck sir andrew!

excited na din ako..... buti nalang my preamp nako. yehey!!!!

rony · « **Reply #3593 on:** Nov 25, 2004 at 01:18 PM »

Quote from: wanderlust on Nov 25, 2004 at 01:11 PM

good luck sir andrew!

excited na din ako..... buti nalang my preamp nako. yehey!!!!

Mas maganda pag power amp lang siya. Mas maximise mo sound niya.

iceman90a · « **Reply #3594 on:** Nov 25, 2004 at 01:40 PM »

Quote from: slayer on Nov 25, 2004 at 12:45 PM

Na excite ako Kaso kelangan talaga ng preamp. $:-\$

ano gusto mo active o passive? pwede gives

H a n $ · « **Reply #3595 on:** Nov 25, 2004 at 09:09 PM »

Quote from: iceman90a on Nov 25, 2004 at 01:40 PM

ano gusto mo active o passive? pwede gives

Dami mo ata preamp senor Ice.

slayer · « **Reply #3596 on:** Nov 25, 2004 at 10:20 PM »

Ang bilis ni iceman...

Quote from: iceman90a on Nov 25, 2004 at 01:40 PM

ano gusto mo active o passive? pwede gives

kid · « **Reply #3597 on:** Nov 26, 2004 at 09:53 AM »

10 tubero ang matutwa nito sir AMXtube

Goodluck

wanderlust · « **Reply #3598 on:** Nov 26, 2004 at 12:30 PM »

10 bagong tubero!!!

H a n $ · « **Reply #3599 on:** Nov 30, 2004 at 06:16 PM »

Any update?