Guys, to those of you who owns a Rega P3-24 amd does not have a Lenco yet, don't fret, The Rega is highly tweakable and is fun to upgrade and imho can give the "mightly Lenco" some competition. . . Wanna share the tweaks I've done with my Rega
![Smiley :)](https://www.pinoydvd.com/Smileys/default/smiley.gif)
First, use Bitumen(Dynamat or Flashband) to dampen your plinth. . . I placed the bitumen accdg to the recommendation in Vinyl Engine. . .
![](http://img12.imageshack.us/img12/4431/dsc0092aw.jpg)
![](http://img404.imageshack.us/img404/4164/dsc009009.jpg)
Then I ordered an aluminum subplatter from Michael Lim of Malaysia
http://lpturntables.blogspot.com/2011_08_01_archive.html![](http://img404.imageshack.us/img404/4164/dsc009009.jpg)
Then ordered a double pulley, pulley puller and dual silicone belt (still from Michael Lim)
![](http://img692.imageshack.us/img692/7906/dsc1105i.jpg)
Decided to remove the old pulley and replace it with the double pulley. . .
Removed the motor cover and gently disassembled the motor from the plinth(which is connected only by a double-sided tape) using screw driver
Positioned the pulley puller and removed the old pulley
![](http://img802.imageshack.us/img802/2109/dsc1110uh.jpg)
![](http://img339.imageshack.us/img339/2627/dsc1112t.jpg)
Installed the new pulley and removed the old double adhesive and replaced it with a 3m, reattach it back to the plinth and placed Flashband on the motor cavity to further dampen it. . .
![](http://img17.imageshack.us/img17/3976/dsc1113lx.jpg)
Attached the dual silicon belts to the dual pulley. . .
![](http://img94.imageshack.us/img94/9449/dsc1115a.jpg)
![](http://img402.imageshack.us/img402/4953/dsc1116fp.jpg)
"The kamagong pucks I bought from Raon, 100php for the whole "pool set"
![Smiley :)](https://www.pinoydvd.com/Smileys/default/smiley.gif)
Attached it to the periphery of the glass platter to increase the "flywheel effect"
I wish you could hear my upgraded Rega p3-24 soon. . .Goodnight guys
![Wink ;)](https://www.pinoydvd.com/Smileys/default/wink.gif)