Topic: Integrated amp as power amp?

[ndotcom]

inislide lang sya eh..mukha nga normal mode lang ata ayaw mag seperates hehe..try ko buksan to see kung paano sya naswitch internally

Padala mo kay Elmer at idaan dito sa bahay ng mabutingting ko sabay linis na rin..

[ATJr.]

Pwede din mag bi-amp maski wlang xover kung may built-in xover ang speakers. John Poscablo added a potentiometer sa 2A3 power amp ko so i can adjust the gain nung naka0biamp ako dati. At least one amp may gain control para i-match na lang dun sa ibang amp.

in this case you need a pink noise generator/RTA to ensure that gain is flat across the board...otherwise hula-hula ang adjustment...

[remington]

2. Source---integrated amp---pre-out---tube preamp/tube buffer---main in
- dito controls at inputs pa rin ni technics gamit mo, so 2 gain/volume mo pag tube preamp, pag tube buffer sa technics vol lang, gamit mo lahat ng inputs meaning pati phono stage
- eto gamit ko config sa technics sa-e10 ko pero MF X10D(tube buffer) gamit ko, in a way hybrid pa rin

mukhang ok tong ganitong connection. Mukhang mas malakas ang magiging effect ng tube pre amp sa SQ.

[raider125jeigh]

Padala mo kay Elmer at idaan dito sa bahay ng mabutingting ko sabay linis na rin..

pwede hehe...

dyan muna sa inyo...dalawa un...

technics 80a and technics 99a hehe...

[jjlovemusic]

pwede hehe...

dyan muna sa inyo...dalawa un...

technics 80a and technics 99a hehe...

Sayang! Maganda sana salpakan ng Radia X3...Nahulate lang ng ilan minutes amfness

[raider125jeigh]

Sayang! Maganda sana salpakan ng Radia X3...Nahulate lang ng ilan minutes amfness

sayang nga eh...nak ng pating haha..
oks lang baka hindi din magkasya sa bahay..pagbukshelf lang tayo as of now hehe..
( kunyari lang...sayang talaga)

2. Source---integrated amp---pre-out---tube preamp/tube buffer---main in
- dito controls at inputs pa rin ni technics gamit mo, so 2 gain/volume mo pag tube preamp, pag tube buffer sa technics vol lang, gamit mo lahat ng inputs meaning pati phono stage
- eto gamit ko config sa technics sa-e10 ko pero MF X10D(tube buffer) gamit ko, in a way hybrid pa rin

mukhang ok tong ganitong connection. Mukhang mas malakas ang magiging effect ng tube pre amp sa SQ.

yup
this was my initial plan - tube pre to technics....but dont have budget yet...
so itried to connect it to HT system first kaya lang hindi gumana...so i assume tube pre-amp wont work either..
kelangan mayos ung switch from normal to seperates for pre-amp to work

[jjlovemusic]

sayang nga eh...nak ng pating haha..
oks lang baka hindi din magkasya sa bahay..pagbukshelf lang tayo as of now hehe..
( kunyari lang...sayang talaga)

kasya yun. pareho lang ng floorspace kakainin nun sa bookshelf + stands. Sige lang manghinayang pa tayo. hehe
para hindi OT, pag may sub/s ka pwede din ganito setup mo: source > pre amp > sub/s > power amp > speakers

[Nelson de Leon]

in this case you need a pink noise generator/RTA to ensure that gain is flat across the board...otherwise hula-hula ang adjustment...

Yes.  I did use both. Then fine tune by ear na lang.

[raider125jeigh]

Yes.  I did use both. Then fine tune by ear na lang.

sensya na slow ako sa above technicalities hehehe...
turuan mo ako in person hehe..

[Nelson de Leon]

sensya na slow ako sa above technicalities hehehe...
turuan mo ako in person hehe..


Surely. next time kapag nag meet tayo.

[ndotcom]

pwede hehe...

dyan muna sa inyo...dalawa un...

technics 80a and technics 99a hehe...

Sige sa friday hakutin natin punta dito, alin ba yung na pair na natin kay Harbie ko yun ang gamitin natin sa friday. Test ko lahat yan sa tube preamp at buffer.

[lakambini]

Hello Guys

I have a yamaha receiver which has pre-outs and main in-puts.

What option will bring the most improvement in sound?

1.  Buy a power amp and make the yamaha as pre-amp?

or

2.  Buy a pre-amp and make the yamaha as the power amp?

tks
 

[Nelson de Leon]

Hello Guys

I have a yamaha receiver which has pre-outs and main in-puts.

What option will bring the most improvement in sound?

1.  Buy a power amp and make the yamaha as pre-amp?

or

2.  Buy a pre-amp and make the yamaha as the power amp?

tks

You need to specify what kind of Yamaha receiver you have. Re sound, is it for sure stereo listening or 5.1 movie or 5.1 music?

[raider125jeigh]

Hello Guys

I have a yamaha receiver which has pre-outs and main in-puts.

What option will bring the most improvement in sound?

1.  Buy a power amp and make the yamaha as pre-amp?

or

2.  Buy a pre-amp and make the yamaha as the power amp?

tks
 

buy power amp not pre amp