Author Topic: Acer H6510BD (Read 81322 times)

nerveblocker · « **Reply #420 on:** Nov 08, 2013 at 07:46 PM »

Quote from: vtec3 on Nov 08, 2013 at 11:33 AM

mayron dito sa Pdvd nagbebenta ng replacement battery with free delivery. forgot lang sino but nakabili na kami sa kanya for our office UPS

Eto bro ang thread...

(F.S) UPSes Battery Rplcmnts 4all Brands & APC UPSes 4sale,all models.free dlvry

I had the battery of my APC UPS replaced by Jun aka drive_image.

DTNS · « **Reply #421 on:** Nov 08, 2013 at 08:02 PM »

sa Motolite, nakakabili ng replacement battery ng UPS. I had my Intex 1500VA UPS' 2 batteries replaced at a Motolite center before.

anyway, OT na tayo.

praktikal · « **Reply #422 on:** Nov 08, 2013 at 11:10 PM »

Quote from: nerveblocker on Nov 08, 2013 at 07:46 PM

Eto bro ang thread...

(F.S) UPSes Battery Rplcmnts 4all Brands & APC UPSes 4sale,all models.free dlvry

I had the battery of my APC UPS replaced by Jun aka drive_image.

thanks doc.

rulesmeister · « **Reply #423 on:** Nov 11, 2013 at 05:26 PM »

More Pics for this PJ

Allan_2180 · « **Reply #424 on:** Nov 12, 2013 at 09:40 AM »

Quote from: DTNS on Nov 08, 2013 at 08:02 PM

sa Motolite, nakakabili ng replacement battery ng UPS. I had my Intex 1500VA UPS' 2 batteries replaced at a Motolite center before.

anyway, OT na tayo.

OT pero magkano po inabot ng UPS battery sa Motolite? using UPS din po kasi sa PJ ko.

DTNS · « **Reply #425 on:** Nov 12, 2013 at 11:04 AM »

Quote from: Allan_2180 on Nov 12, 2013 at 09:40 AM

OT pero magkano po inabot ng UPS battery sa Motolite? using UPS din po kasi sa PJ ko.

around 1.5-2k ata nagastos ko nun. 2x na OM7-12 7ah batteries kasi kailangan ng UPS ko. depende rin sa type, capacity, at quantity ng battery ang gagastusin mo sa battery replacement.

Allan_2180 · « **Reply #426 on:** Nov 12, 2013 at 04:32 PM »

Quote from: DTNS on Nov 12, 2013 at 11:04 AM

around 1.5-2k ata nagastos ko nun. 2x na OM7-12 7ah batteries kasi kailangan ng UPS ko. depende rin sa type, capacity, at quantity ng battery ang gagastusin mo sa battery replacement.

Thanks po! Gamit ko po kasi ngayon PowercomAce 1000VA, 2x 12V 9AH po ung nasa loob. Hanap na lang po ako ng pinakamalapit na Motolite Supplier dito sa amin.

DTNS · « **Reply #427 on:** Nov 13, 2013 at 01:33 AM »

Quote from: Allan_2180 on Nov 12, 2013 at 04:32 PM

Thanks po! Gamit ko po kasi ngayon PowercomAce 1000VA, 2x 12V 9AH po ung nasa loob. Hanap na lang po ako ng pinakamalapit na Motolite Supplier dito sa amin.

I think same tayo ng replacement battery type. 2pcs 12v 7ah, same size ng 12v 9ah. check my pic below:

praktikal · « **Reply #428 on:** Dec 13, 2013 at 09:54 AM »

amigos, saan pa ba meron nito aside from villman? sana meron na sa av shops with demo unit. mukhang bomalabs na ang ax200 namin

Nelson de Leon · « **Reply #429 on:** Dec 13, 2013 at 11:28 AM »

Quote from: praktikal on Dec 13, 2013 at 09:54 AM

amigos, saan pa ba meron nito aside from villman? sana meron na sa av shops with demo unit. mukhang bomalabs na ang ax200 namin

Pwede mo ako bisitahin.

praktikal · « **Reply #430 on:** Dec 13, 2013 at 05:22 PM »

Quote from: Nelson de Leon on Dec 13, 2013 at 11:28 AM

Pwede mo ako bisitahin.

gusto ko lang muna sana ma check kung ang distance at angle ay ok para sure na di magiging problema o walang compromise sakaling ito ang mabili kaya maganda kung demo unit kasi for sure ang mga pj nyo naka mount na.

base sa calculator, 8.5' ang ideal distance for 92" (91" actual) screen at pasok pa naman sa 9ft kong target. sayang kasi hindi pwede sa current location ng shelf.

ito yung existing:

mabuti nalang walang matangkad sa amin

$:-\$

concern ko ay kung maayos ang keystone ng acer, baka kasi mahalata ang distortion.

tinkyow!

Nelson de Leon · « **Reply #431 on:** Dec 14, 2013 at 02:28 AM »

Quote from: praktikal on Dec 13, 2013 at 05:22 PM

gusto ko lang muna sana ma check kung ang distance at angle ay ok para sure na di magiging problema o walang compromise sakaling ito ang mabili kaya maganda kung demo unit kasi for sure ang mga pj nyo naka mount na.

base sa calculator, 8.5' ang ideal distance for 92" (91" actual) screen at pasok pa naman sa 9ft kong target. sayang kasi hindi pwede sa current location ng shelf.

ito yung existing:

mabuti nalang walang matangkad sa amin $:-\$

concern ko ay kung maayos ang keystone ng acer, baka kasi mahalata ang distortion.

tinkyow!

Medjo kailangan ibaba ang height ng PJ na ito (compared to your drawing) if you don't want to use the keystone. I cannot give you an accurate answer pero based on my guesstimate, it should be between 50-60 incehes based on your drawing. I may be wrong.

praktikal · « **Reply #432 on:** Dec 14, 2013 at 07:57 AM »

Quote from: Nelson de Leon on Dec 14, 2013 at 02:28 AM

Medjo kailangan ibaba ang height ng PJ na ito (compared to your drawing) if you don't want to use the keystone. I cannot give you an accurate answer pero based on my guesstimate, it should be between 50-60 incehes based on your drawing. I may be wrong.

Ok lang din namang gamitin ang keystone as long as ok ang result. Kung pwede nga sana itaas pa instead kasi ang 9' distance ay nasa taas ng sweet spot at kapag mas matangkad sa akin ang pumwesto yari si pj.

wala akong paki sa ulo nya hahaha!

Tinkyow kuya Nelson

Nelson de Leon · « **Reply #433 on:** Dec 14, 2013 at 08:15 AM »

Quote from: praktikal on Dec 14, 2013 at 07:57 AM

Ok lang din namang gamitin ang keystone as long as ok ang result. Kung pwede nga sana itaas pa instead kasi ang 9' distance ay nasa taas ng sweet spot at kapag mas matangkad sa akin ang pumwesto yari si pj. wala akong paki sa ulo nya hahaha!

Tinkyow kuya Nelson

Yun akin is 8 feet, naka-keystone pa at 5 points. Mataas ng 6 inches yun top ng screen dun sa ibaba ng PJ.

It's khoya.

praktikal · « **Reply #434 on:** Dec 14, 2013 at 08:47 AM »

Quote from: Nelson de Leon on Dec 14, 2013 at 08:15 AM

Yun akin is 8 feet, naka-keystone pa at 5 points. Mataas ng 6 inches yun top ng screen dun sa ibaba ng PJ.

It's khoya.

Ay 8 feet! Ang haba ng sa iyo kuya este khoya!!! No wonder ha!

Parallel sa ground o tilted? Yung sa akin for sure tilt down for sure. Ayokong sabihing payuyukuin ko ang sa akin kasi baka ibalik mo sa akin, talo ako haha,

Nelson de Leon · « **Reply #435 on:** Dec 14, 2013 at 02:20 PM »

Quote from: praktikal on Dec 14, 2013 at 08:47 AM

Ay 8 feet! Ang haba ng sa iyo kuya este khoya!!! No wonder ha!

Parallel sa ground o tilted? Yung sa akin for sure tilt down for sure. Ayokong sabihing payuyukuin ko ang sa akin kasi baka ibalik mo sa akin, talo ako haha,

Slightly angled/tilted downward. Aaaaayyy!!! Nakakloka ang usapan natin!

Moks007 · « **Reply #436 on:** Dec 15, 2013 at 09:03 PM »

I finally got this projector running correctly. It fits my screen better now. Finally maximized my picture. Meron pala picture adjustment on the lens mismo. Well, newbie talaga Ako sa pj hahaha. I guess you learn something new everyday.

Great picture, great pj!

bote · « **Reply #437 on:** Feb 16, 2014 at 11:50 AM »

Please help in finding the right ceiling mount for this pj. Thanks in advance.

Nelson de Leon · « **Reply #438 on:** Feb 16, 2014 at 05:43 PM »

Quote from: bote on Feb 16, 2014 at 11:50 AM

Please help in finding the right ceiling mount for this pj. Thanks in advance.

Saan na ba kayo naghanap ng ceiling mount for your PJ?

bote · « **Reply #439 on:** Feb 16, 2014 at 09:33 PM »

So far dito pa lang sa forum . I got a universal mount but it's not really that suitable. For my 5360 it's ok but not with 6510.

Nelson de Leon · « **Reply #440 on:** Feb 16, 2014 at 09:51 PM »

Quote from: bote on Feb 16, 2014 at 09:33 PM

So far dito pa lang sa forum . I got a universal mount but it's not really that suitable. For my 5360 it's ok but not with 6510.

Sa mga Ace hardware at mga suking dealers ng Pdvd for sure meron. Supposedly, same lang ang dimemsions ng 5360 vs 6510 AFAIK. Hindi ko lang sure ang mga screw positions.

bote · « **Reply #441 on:** Feb 17, 2014 at 12:19 AM »

Medyo askew sang screw positions ng 6510 kaya di ko magamit young para da 5360.
Thanks.

Nelson de Leon · « **Reply #442 on:** Feb 17, 2014 at 08:15 AM »

Quote from: bote on Feb 17, 2014 at 12:19 AM

Medyo askew sang screw positions ng 6510 kaya di ko magamit young para da 5360.
Thanks.

I see. You can use nylon straps instead of buying a new PH ceiling mount. Even with the screws in proper place, i would still recommend the use of nylon straps to secure the PJ. I think small copper inserts lang ang gamit nila.

bote · « **Reply #443 on:** Feb 17, 2014 at 07:04 PM »

Quote from: Nelson de Leon on Feb 17, 2014 at 08:15 AM

I see. You can use nylon straps instead of buying a new PH ceiling mount. Even with the screws in proper place, i would still recommend the use of nylon straps to secure the PJ. I think small copper inserts lang ang gamit nila.

Pwede nga pero kaya lang parang medyo eyesore. Meron sa amazon pang acer pero they dont ship to Pinas. Thanks.

Nelson de Leon · « **Reply #444 on:** Feb 17, 2014 at 07:28 PM »

Quote from: bote on Feb 17, 2014 at 07:04 PM

Pwede nga pero kaya lang parang medyo eyesore. Meron sa amazon pang acer pero they dont ship to Pinas. Thanks.

You can pre-order from our suking importers here like Anya sir.

bote · « **Reply #445 on:** Feb 19, 2014 at 09:20 PM »

Thanksfor all the tips.

nick_d · « **Reply #446 on:** Feb 20, 2014 at 10:20 AM »

Meron na po bang nag-replace ng lamp? Was it readily available?

Nelson de Leon · « **Reply #447 on:** Feb 20, 2014 at 10:30 AM »

Quote from: nick_d on Feb 20, 2014 at 10:20 AM

Meron na po bang nag-replace ng lamp? Was it readily available?

I am presuming meron because si Villman nagbebenta nito. It is also released locally kaya i think parts are available.

tapyok · « **Reply #448 on:** Mar 07, 2014 at 04:11 PM »

sa acer store, may demo po ba nito? San po kaya pwedeng mAkita ung unit in action? Salamat po

DTNS · « **Reply #449 on:** Mar 08, 2014 at 05:55 AM »

Quote from: tapyok on Mar 07, 2014 at 04:11 PM

sa acer store, may demo po ba nito? San po kaya pwedeng mAkita ung unit in action? Salamat po

walang demo unit nito. by order lang cya.

btw, I'm getting a 100" 16:9 screen for my Acer PJ soon.