Author Topic: My Tube Journey (Read 210462 times)

cyberdraven · « **Reply #360 on:** May 08, 2015 at 08:51 AM »

Got it sir. So if i get a dedicated preamp, my integrates will function as a power amp. Can i just full the volume of the amp and control the volume through the preamp.

tony · « **Reply #361 on:** May 08, 2015 at 08:54 AM »

Quote from: cyberdraven on May 08, 2015 at 08:51 AM

Got it sir. So if i get a dedicated preamp, my integrates will function as a power amp. Can i just full the volume of the amp and control the volume through the preamp.

i know someone, he puts any preamp he wants to evaluate in series with his set-up,
then if his setup changed for the worse then the preamp is not good,
but if the system improved, then his system was lacking to begin with...
a good preampwillnotchange anything on an already good set-up,
this is how he knows what a good preamp is....

xbase · « **Reply #362 on:** May 09, 2015 at 03:43 PM »

Quote from: tony on May 08, 2015 at 08:54 AM

i know someone, he puts any preamp he wants to evaluate in series with his set-up,
then if his setup changed for the worse then the preamp is not good,
but if the system improved, then his system was lacking to begin with...
a good preampwillnotchange anything on an already good set-up,
this is how he knows what a good preamp is....

oo nga, pag maganda na setup tapos nilagyan buffer/preamp tapos nadagdagan ang ganda, ibig sabihin maganda un preamp. tatlong/preamp buffer na na try ko di pa rin gumaganda ung setup ko...out of luck, now i'm trying to look for a simple design buffer/preamp to match my system, baka may ma suggest ka master tony...?

tony · « **Reply #363 on:** May 09, 2015 at 05:17 PM »

^^^do you even need one?
sometimes we covet things not because we need it, but because we do not have it..
kaya nga kadalasan sa marketplace din ang bagsak, binenta na....

xbase · « **Reply #364 on:** May 09, 2015 at 05:53 PM »

Quote from: tony on May 09, 2015 at 05:17 PM

^^^do you even need one?
sometimes we covet things not because we need it, but because we do not have it..
kaya nga kadalasan sa marketplace din ang bagsak, binenta na....

kaya audition muna ako until i find the "right" one, looks like nasa "want" ako kesa "need"... at parang gusto ko na ring mag diy ng simple design lang....

tony · « **Reply #365 on:** May 10, 2015 at 08:08 AM »

only you can decide what route to take in your own journey...

that is why i am loaning out my gears so that those with an itch and a want can
try them out without spending a lot, except time...

zonks · « **Reply #366 on:** May 10, 2015 at 09:10 AM »

panu usapan sa loan ng gears sir?

tony · « **Reply #367 on:** May 10, 2015 at 09:18 AM »

Quote from: zonks on May 10, 2015 at 09:10 AM

panu usapan sa loan ng gears sir?

first we have to meet face to face.....

then we listen for the tubes in a while, then you decide if you want to do more tasting....

tony · « **Reply #368 on:** May 28, 2015 at 12:24 PM »

LOOK MA, NO TUBES........

this is my final hack for the Sakura AV200...get rid of the tubes, we don't need them anymore.......
so don't be afraid if your tubes died out on you, the amp can still run...

program source is my midi player Bread was on deck...

panasonic 2,2ufd polypropylene cap inserted at pins 2 and 3 on the 6n2 socket...

first tried out a 10ufd cap but leads are not enough long to fit into tube socket

a tube ss rectifer can be used also to get rid of the 5z4///

Tube Exorcism completed....

cyberdraven · « **Reply #369 on:** May 28, 2015 at 12:40 PM »

Sir, Ive been wanting to ask this questio with regards to sakura. Someone told me that the sakura will play even without the tubes nor any load in the tube sockets.

tony · « **Reply #370 on:** May 28, 2015 at 12:48 PM »

Quote from: cyberdraven on May 28, 2015 at 12:40 PM

Sir, Ive been wanting to ask this questio with regards to sakura. Someone told me that the sakura will play even without the tubes nor any load in the tube sockets.

not without doing something inside the amp...

and that is what i have demonstrated...

tony · « **Reply #371 on:** May 29, 2015 at 08:30 AM »

Tuesday, May 23 mini eyeball with kabalen's at Angeles City, Pampangga....
we are the audio techies having a mini EB testing power amps as per FTC: watts rms, 1khz, 8ohms dummy load....
Norman Santos is one OFW working in Dubai, who spends his spare time laying out boards,
he is one of the many OFW's spending their time in a very productive way....
you will be delighted to find out that our local techies are now designing ang making their own smps psu's...
the Pinoy talent are all over the earth....
our Pinoy engineers in China produces many consumer electronics products,
i wll not be surprised if your DAC which came from china has the hand of a Pinoy techie
at one point or another...

left to right, Larry Roxas, Wewe Padilla, Tony Tecson, Jun Mabanta, Kiko Jimenez, Norman Santos, Jun del Mundo

really feels good to be among peers.....

geriboy · « **Reply #372 on:** Jun 02, 2015 at 10:54 AM »

Sir Tony, ano po uli yung brand and model ng floorstand speakers ninyo sa bahay? Pasensya nakalimutan ko. Thanks!

tony · « **Reply #373 on:** Jun 02, 2015 at 11:25 AM »

Dai-Ichii, US Audio...

geriboy · « **Reply #374 on:** Jun 02, 2015 at 11:39 AM »

Thank you!

tony · « **Reply #375 on:** Jun 02, 2015 at 12:33 PM »

this is a classA 6bq5/el84 tube amp by a guy called Brgy Tanod from cebu....

geriboy · « **Reply #376 on:** Jun 02, 2015 at 12:35 PM »

Eto na po ba yung kinalabasan ng kits na pinadala mo sa Cebu? - http://www.pinoydvd.com/index.php/topic,184568.msg2264683.html#msg2264683

Quote from: tony on Jun 02, 2015 at 12:33 PM

this is a classA 6bq5/el84 tube amp by a guy called Brgy Tanod from cebu....

tony · « **Reply #377 on:** Jun 02, 2015 at 12:47 PM »

at last tumunog na, 4P1L parallel SET, design goal was to run the tubes as if they were
2A3's, 250 volt plate and 60 mA cathodes(total for the two tubes)...
a slight tweaking will still need to be done...
i am gettng the filaments to run at least 4 volts...
it is true what they say about this tube being parallel friendly...
and while i used dc to power the filament, i suspect that just like
the 2A3, these tubes can run on AC filaments at 2 volts and still be hum free...

tony · « **Reply #378 on:** Jun 02, 2015 at 12:49 PM »

Quote from: geriboy on Jun 02, 2015 at 12:35 PM

Eto na po ba yung kinalabasan ng kits na pinadala mo sa Cebu? - http://www.pinoydvd.com/index.php/topic,184568.msg2264683.html#msg2264683

yes doc, the guy is a techie and makes his own ss amps,
he asked me for help since he wanted to get a feel of what
his lolo had while he was growing up....
another happy tubero on his way to tube wonderland.....

camoteque · « **Reply #379 on:** Jun 02, 2015 at 12:51 PM »

Quote from: tony on Jun 02, 2015 at 12:47 PM

at last tumunog na, 4P1L parallel SET, design goal was to run the tubes as if they were
2A3's, 250 volt plate and 60 mA cathodes....a slight tweaking will still need to be done...
i am gettng the filaments to run at least 4 volts...
it is true what they say about this tube being parallel friendly...
and while i used dc to power the filament, i suspect that just like
the 2A3, these tubes can run on AC filaments at 2 volts and still be hum free...

Nice. Why not try running the filament at AC? Di ba pwede parang bypass switch lang? What are the other tube complements?

tony · « **Reply #380 on:** Jun 02, 2015 at 12:57 PM »

Quote from: camoteque on Jun 02, 2015 at 12:51 PM

Nice. Why not try running the filament at AC? Di ba pwede parang bypass switch lang? What are the other tube complements?

we can, but we need to change the power traffo....

tube complements are all Russian, 6j9(e180f/6688) input pentode wired as a triode, 6n1p broskie cathode followers...

tony · « **Reply #381 on:** Jun 20, 2015 at 07:28 PM »

my 6HF5 pp class AB2 power amp.....
work in progress, about to complete...
tube compliments, 6H8c cathode followers,
6BH11 input and phase splitters, 6922 input buffer...

filament and psu caps only testing, raw B+ at 570 volts...

power draw with just the filaments and psu only...

remington · « **Reply #382 on:** Jun 21, 2015 at 11:42 AM »

WOW another flavor!!! Happy fathers day master!

tony · « **Reply #383 on:** Jun 21, 2015 at 01:10 PM »

Quote from: remington on Jun 21, 2015 at 11:42 AM

WOW another flavor!!! Happy fathers day master!

thanks, you too have a good one,,,,,

tetablanco · « **Reply #384 on:** Jun 28, 2015 at 07:22 PM »

Quote from: tony on Jun 02, 2015 at 12:47 PM

at last tumunog na, 4P1L parallel SET, design goal was to run the tubes as if they were
2A3's, 250 volt plate and 60 mA cathodes(total for the two tubes)...
a slight tweaking will still need to be done...
i am gettng the filaments to run at least 4 volts...
it is true what they say about this tube being parallel friendly...
and while i used dc to power the filament, i suspect that just like
the 2A3, these tubes can run on AC filaments at 2 volts and still be hum free...

It was so good to finally meet you in person, Sir Tony! Thanks for accommodating my request to buy the tube preamp / phono stage featured above. When paired together with my new PSVANE 2a3B tubes for the SET tube amp you built, my Master Tony setup is now perfect and has never sounded better. Thanks!

zonks · « **Reply #385 on:** Jun 28, 2015 at 08:29 PM »

Quote from: tony on May 10, 2015 at 09:18 AM

first we have to meet face to face.....

then we listen for the tubes in a while, then you decide if you want to do more tasting....

mukhang iayus ko time management ko nito, nasa akin yung vintage na victor speaker ni mtcc. gusto i try sa tube.

tony · « **Reply #386 on:** Jun 29, 2015 at 06:37 AM »

Quote from: tetablanco on Jun 28, 2015 at 07:22 PM

It was so good to finally meet you in person, Sir Tony! Thanks for accommodating my request to buy the tube preamp / phono stage featured above. When paired together with my new PSVANE 2a3B tubes for the SET tube amp you built, my Master Tony setup is now perfect and has never sounded better. Thanks!

the pleasure is mine sir.....now you have two controls to play around with.....

tony · « **Reply #387 on:** Jun 29, 2015 at 06:56 AM »

Quote from: zonks on Jun 28, 2015 at 08:29 PM

mukhang iayus ko time management ko nito, nasa akin yung vintage na victor speaker ni mtcc. gusto i try sa tube.

yes, if you can bring those speakers to the house we can try them...
or you can pm me you location and i may be able to point you a member near you using my amp...
please pm me model number of your speakers.....thanks...

tony · « **Reply #388 on:** Jun 29, 2015 at 07:03 AM »

Quote from: geriboy on Jun 02, 2015 at 12:35 PM

Eto na po ba yung kinalabasan ng kits na pinadala mo sa Cebu? - http://www.pinoydvd.com/index.php/topic,184568.msg2264683.html#msg2264683

yes doc....the guy up until then was building only solid state amps, he did it right the first time...

camoteque · « **Reply #389 on:** Jun 29, 2015 at 12:36 PM »

Quote from: tony on Jun 02, 2015 at 12:47 PM

at last tumunog na, 4P1L parallel SET, design goal was to run the tubes as if they were
2A3's, 250 volt plate and 60 mA cathodes(total for the two tubes)...
a slight tweaking will still need to be done...
i am gettng the filaments to run at least 4 volts...
it is true what they say about this tube being parallel friendly...
and while i used dc to power the filament, i suspect that just like
the 2A3, these tubes can run on AC filaments at 2 volts and still be hum free...

Maganda Tony. I have 2 more 2A3 SE amps and this 4p1L amp is in the same league if not better. Very transparent sounding. The amp is currently connected to my midhorns taking care of 600hz to 4.5khz duties.