Topic: Pin Connector vs. Yamaha RX-V379

[JeromeA]

Masters ask ko lang kung paano ko mapagkakasya ang pin connector ko sa receiver ko.nasayang lang ata ang binili ko, ang problema ko is maipapasok ko sya kung pipilitin kong bukahin ang clip ng receiver ko. tapos kung maipasok ko mang sya wala pang kalahati ng pin ang papasok so nag wowobble ang pin connector ko. ano po ang pwede kong gawin? mali ba ang pagkabili ko ng pin connector o my way sya para ikabit? please see pictures below sa pin connector at receiver.



 

[czarsky]

In your case, it is not advisable to use this type of "pin" as this is not designed for this type of speaker terminals.  If you cannot get "ferrules", I would suggest you just solder the ends of your speaker wires to they can stay together

Here's how it looks like, it requires a special crimper but you can use a normal pliers if you don't have one . . .
https://www.google.com.ph/search?q=ferrule+connector&espv=2&biw=1366&bih=659&tbm=isch&imgil=cLVsKf93iiBoyM%253A%253BoEImFqRnrm2NXM%253Bhttp%25253A%25252F%25252Fwww.amazon.com%25252F100Pcs-Connector-Insulated-Ferrule-Terminal%25252Fdp%25252FB00GOJX710&source=iu&pf=m&fir=cLVsKf93iiBoyM%253A%252CoEImFqRnrm2NXM%252C_&usg=__CdPPp7Jyu64pFsmOqpzbEoZzrFk%3D&ved=0ahUKEwj54NOA1YvMAhUKCpoKHXjdBbwQyjcIJQ&ei=GUIOV7nwC4qU6AT4upfgCw#imgrc=cLVsKf93iiBoyM%3A

[zonks]

 dba dapat banana plugs lang?

[Nelson de Leon]

Baka sa maliit na speaker connection niya ikakabit. Yun may may 3 red & 3 black terminals niya ata ikakabit. Alam ko it's designed for bare wire lang.

[zonks]

oo nga, malabo pa yung tinatanung ni TS e

[JeromeA]

Baka sa maliit na speaker connection niya ikakabit. Yun may may 3 red & 3 black terminals niya ata ikakabit. Alam ko it's designed for bare wire lang.

sorry di ko pala na kumpleto. eto ang tamang tanong jan. dun ko nga sya ikakabit sana sa surround at center. kaso di kasya.. yung banana plugs sa front wala ng prob dun. kasi sa pin connectors yun ang naka define sa kanya na pwede sya sa ganun...

[markcrenz]

Speaker clips can only take in about 1/2" of bare wire. Yung speaker pin, which I think is about an inch long, eh hindi talaga maiipasok ng sagad.

Using pins is not advisable, you'll have only 2 (or at most 3 kung didikit sa side) tangential contact points between the pin and the clip. Graphical representation, yung parallel lines ang clip, yung pin ang circle:


Accordingly 37, 49 or more small circles (wire strands) pressed by those parallel lines will have a much greater number of contact points for better conduction.

[Nelson de Leon]

Speaker clips can only take in about 1/2" of bare wire. Yung speaker pin, which I think is about an inch long, eh hindi talaga maiipasok ng sagad.

Using pins is not advisable, you'll have only 2 (or at most 3 kung didikit sa side) tangential contact points between the pin and the clip. Graphical representation, yung parallel lines ang clip, yung pin ang circle:


Accordingly 37, 49 or more small circles (wire strands) pressed by those parallel lines will have a much greater number of contact points for better conduction.

Please include max current possible if those pin type terminals are used. Hehehe!


Agree with you.

[JeromeA]

thank you mga master.. sabi na eh dito ko lang lagi mahahanap mga kasagutan. hindi kaya sagutin ni google mga tanong ko as newbie eh.haha

[markcrenz]

Please include max current possible if those pin type terminals are used. Hehehe!


Agree with you.

Master natutulog ka pa ba? 

[Nelson de Leon]

Master natutulog ka pa ba? 

Haha! Very irregular sleep time lately because I'm taking advantage of the school vacation. Hindi na driver ng daughter to school.

Sent from my ASUS_T00J using Tapatalk 4

[JeromeA]

Haha! Very irregular sleep time lately because I'm taking advantage of the school vacation. Hindi na driver ng daughter to school.

Sent from my ASUS_T00J using Tapatalk 4

si master nelson walang absent sa pagcomment at pag tulong sa lahat ng mga katanungan dito.salamat sir