Author Topic: Monitor Audio Speakers (Read 473346 times)

j_albert22 · « **Reply #2250 on:** Nov 01, 2004 at 09:42 AM »

Quote from: sebman on Oct 29, 2004 at 09:11 AM

pa-pm din nung tweak mga papa.. kaya lang nde ako marunong maghinang e... pwede ba home service mga papa...

hehehe ttotal malapit lang c kim sa inyo kay kim mo pagawa magaling manghinang yan hehehehe lahat hihinangin nyan

j_albert22 · « **Reply #2251 on:** Nov 01, 2004 at 09:45 AM »

Quote from: s2kov on Oct 29, 2004 at 10:54 AM

To all B4 owners; if you plan to replace the internal wiring, required cable length is 10feet per speaker enclosure. So, total of 20feet for the pair of speaker. Mine, only the the jumper wire has been replaced but noticed the improvement. IME

20 feet times 97 = 1940 pesos din whaaaaaaaa SARS attack at ang epekto happy listening naman at yon ang di nabibili

mcbry · « **Reply #2252 on:** Nov 02, 2004 at 09:58 AM »

guys,

mga ilang oras ba break in ng B4?

btw, thank you very much to architectural audio (esp to chad) for their excellent service

... more power guys.

cheers.

audioworld · « **Reply #2253 on:** Nov 02, 2004 at 10:43 AM »

Monitor Audio "As close as it gets" [/size] [/b]

Bronze Series

B1

Technical Specifications Frequency Response 55Hz-22KHz Sensitivity (1W@1m) 88dB Nominal Impedance (Ohms) 6 Power Handling RMS (W) 70 Drive Unit Complement 1 x 5.5" MMP® MK2 Bass mid-range 1 x 25mm Gold Dome C-CAM® tweeter Cabinet Design Rear ported, bass reflex Product Exernal Dimensions cm (inch) 26H x 16.5W x 18D (10 1/4" x 6 1/2" x 7") Weight (packaged) Kg (lb) 9.5 (21) Finishes Black Ash, Rosemah or Beech vinyl with Black Grille

B2

Technical Specifications Frequency Response 42Hz-22KHz Sensitivity (1W@1m) 90dB Nominal Impedance (Ohms) 6 Power Handling RMS (W) 100 Drive Unit Complement 1 x 6.5" MMP® MK2 Bass mid-range 1 x 25mm Gold Dome C-CAM® tweeter Cabinet Design Front ported, bass reflex Product Exernal Dimensions cm (inch) 35H x 18.5W x 25D (13 3/4" x 7 1/4" x 10") Weight (packaged) Kg (lb) 13.5 (30) Finishes Black Ash, Rosemah or Beech vinyl with Black Grille

B4

Technical Specifications Frequency Response 36Hz-22KHz Sensitivity (1W@1m) 91dB Nominal Impedance (Ohms) 6 Power Handling RMS (W) 150 Drive Unit Complement 1 x 6.5" MMP® MK2 Bass 1 x 6.5" MMP® MK2 Bass mid-range 1 x 25mm Gold Dome C-CAM® tweeter Cabinet Design Front & rear ported, bass reflex Product Exernal Dimensions cm(inch) 85H x 18.5W x 25.5D (33 1/2" x 7 1/4" x 10") Weight (packaged) Kg (lb) 18 (40) Finishes Black Ash, Rosemah or Beech vinyl with Black Grille

B Center

Technical Specifications Frequency Response 60Hz-22KHz Sensitivity (1W@1m) 91dB Nominal Impedance (Ohms) 8 Power Handling RMS (W) 120 Drive Unit Complement 2 x 5.5" MMP® MK2 Bass mid-range 1 x 25mm Gold Dome C-CAM® tweeter Cabinet Design Sealed Cabinet Product Exernal Dimensions cm (inch) 16.4H x 46W x 16.3D (6 1/2" x 18" x 6 1/2") Weight (packaged) Kg (lb) 8 (18) Finishes Black Ash, Rosemah or Beech vinyl with Black Grille

BFX

Technical Specifications Frequency Response 65 Hz-22 KHz (in room –3dB) Impedance 6 Ohms Nominal Sensitivity 88 dB (1W&1M) Power handling 80 Watts (R.M.S) Driver Complement 1 x 5” MMP II bass/midrange driver 2 x 25mm Gold dome C-CAM tweeter External Dimensions: 290 wide x 285 high x 130 deep (mm) 11.4” wide x 11.2” high x 5.1” deep (inch) Weight 4 Kg/ 8.8 lb (each) 9 Kg/ 19.8lb (packed pair) Finishes: Black and white

sebman · « **Reply #2254 on:** Nov 02, 2004 at 10:49 AM »

Quote from: j_albert22 on Nov 01, 2004 at 09:42 AM

hehehe ttotal malapit lang c kim sa inyo kay kim mo pagawa magaling manghinang yan hehehehe lahat hihinangin nyan

ot.. oks yan.... nasubukan mo na ba to pre....

H a n $ · « **Reply #2255 on:** Nov 02, 2004 at 02:01 PM »

Sebman,

Di pa nya nasubokan hehehhee.. lakas lang manghawa ng SARS yan.. pero According to S2kov clearly improve yun B4 nya... very very clear!!

kimpao · « **Reply #2256 on:** Nov 02, 2004 at 02:06 PM »

Quote from: j_albert22 on Nov 01, 2004 at 09:42 AM

hehehe ttotal malapit lang c kim sa inyo kay kim mo pagawa magaling manghinang yan hehehehe lahat hihinangin nyan

Oo ba! Pang yosi lang, ok na sa akin! Malakas yan si pareng sebman, yan pa.

Seb, ano ok ba sa iyo? Sanay ako huminang ng bakal yun nga lang acetylin at oxygen (lalo na sa welding machine) ang gagamintin ko.

sebman · « **Reply #2257 on:** Nov 02, 2004 at 02:10 PM »

Quote from: kimpao on Nov 02, 2004 at 02:06 PM

Oo ba! Pang yosi lang, ok na sa akin! Malakas yan si pareng sebman, yan pa.

Seb, ano ok ba sa iyo? Sanay ako huminang ng bakal yun nga lang acetylin at oxygen (lalo na sa welding machine) ang gagamintin ko.

pre oks yan... tutal nde pa break-in yung B4 ko... pwede din bang magdala ka din ng chainsaw... para mabilis and break-in...

break into 2 equal parts ha.. hehhehehe

mcbry · « **Reply #2258 on:** Nov 02, 2004 at 02:17 PM »

sir,

tanong lang po... mga ilang oras ba dapat ang break in ng b4?

thanks,

H a n $ · « **Reply #2259 on:** Nov 02, 2004 at 02:19 PM »

Quote from: mcbry on Nov 02, 2004 at 02:17 PM

sir,

tanong lang po... mga ilang oras ba dapat ang break in ng b4?

thanks,

150 to 200 hours pre.. yun initial 50 hours mo moderate volume lang tapos nun pwede na malakas lakas.. wag lang party level pre..

kimpao · « **Reply #2260 on:** Nov 02, 2004 at 02:22 PM »

Quote from: mcbry on Nov 02, 2004 at 02:17 PM

sir,

tanong lang po... mga ilang oras ba dapat ang break in ng b4?

thanks,

Average of about 150 hrs or so, since this would depend on your usage.

mcbry are these brand new or preowned? If new, better to use ecosse wires for breaking in then change to xlo once the mids become muddy.

just a suggestion.

Took me 1 1/2 months for my MA to fully break-in.

mcbry · « **Reply #2261 on:** Nov 02, 2004 at 03:18 PM »

wow! ang tagal din pala ng break in nito sir kimpao

...

sir, this unit is brand new... actually i'm using xlo er14 wires... any tips sir paano i-break in ng maganda ang b4? i'm using hk330.

thanks you very much for the suggestion.

cheers,

t_s_o_n_g · « **Reply #2262 on:** Nov 02, 2004 at 04:01 PM »

Nako! tagal pala ang break in nito. Unahan nalang tayo mcbry...

Tamang-tama, Audio Pro muna na cable gamit ko. Pag na broke in na tsaka bili ng XLO...

H a n $ · « **Reply #2263 on:** Nov 02, 2004 at 05:20 PM »

Quote from: mcbry on Nov 02, 2004 at 03:18 PM

wow! ang tagal din pala ng break in nito sir kimpao ...

sir, this unit is brand new... actually i'm using xlo er14 wires... any tips sir paano i-break in ng maganda ang b4? i'm using hk330.

thanks you very much for the suggestion.

cheers,

Gamitin mo lang daily pwede na yan..

mcbry · « **Reply #2264 on:** Nov 02, 2004 at 09:00 PM »

gamitin ko na nga lang daily para mabilis ma break in ang b4 ko

maraming salamat sir hans for the suggestion

kimpao · « **Reply #2265 on:** Nov 02, 2004 at 11:07 PM »

Quote from: mcbry on Nov 02, 2004 at 09:00 PM

gamitin ko na nga lang daily para mabilis ma break in ang b4 ko

maraming salamat sir hans for the suggestion

Yup that's what i also did. para tipid ka rin sa kuryente.

BTW, you might want to replace the stock jumpers with XLO also. All you need to do is cut a small length from your existing speaker wires, around 3 to 4 inches for each speaker, then strip both ends and replace those stock jumpers.

Control · « **Reply #2266 on:** Nov 03, 2004 at 07:43 AM »

Quote from: kimpao on Nov 02, 2004 at 11:07 PM

Yup that's what i also did. para tipid ka rin sa kuryente. BTW, you might want to replace the stock jumpers with XLO also. All you need to do is cut a small length from your existing speaker wires, around 3 to 4 inches for each speaker, then strip both ends and replace those stock jumpers.

Sir Kimpao, dagdag ko lang ha...

1 foot of XLO Pro = P200
XLO Spade = P150 (You will need a pair of these per jumper kung gusto mong naka-terminate yung dulo)

Sir kimpao, pina-terminate mo ba yung mga ends ng jumpers mo?

odyopayl · « **Reply #2267 on:** Nov 03, 2004 at 09:13 AM »

I believe break-in of speakers requires time! You need patience, just listen to it approximately 4 hour a day untill you complete the required burn-in process. It's a mechanical break-in Slowly but surely!

kimpao · « **Reply #2268 on:** Nov 03, 2004 at 11:35 AM »

Quote from: Control on Nov 03, 2004 at 07:43 AM

Sir Kimpao, dagdag ko lang ha...

1 foot of XLO Pro = P200
XLO Spade = P150 (You will need a pair of these per jumper kung gusto mong naka-terminate yung dulo)

Sir kimpao, pina-terminate mo ba yung mga ends ng jumpers mo?

OK din yan sir kaso mas magastos.

Mas ok pag bare wire.

mcbry · « **Reply #2269 on:** Nov 03, 2004 at 11:47 AM »

Quote from: kimpao on Nov 02, 2004 at 11:07 PM

Yup that's what i also did. para tipid ka rin sa kuryente. BTW, you might want to replace the stock jumpers with XLO also. All you need to do is cut a small length from your existing speaker wires, around 3 to 4 inches for each speaker, then strip both ends and replace those stock jumpers.

sir, napalitan na po yung stock jumper wires. audience wire yung pinalit courtesy of architectural audio (thanks to chad)

. thank you very much for the suggestions sir kimpao. my b4 still has a long way to go para ma break in. mga 16 hrs palang kasi ang gamit

. pero tama nga din si sir odyopayl, kailangan talaga ng patience during break in process... slowly but surely kailangan.

thanks again mga sir for the help.

positive_noise · « **Reply #2270 on:** Nov 03, 2004 at 08:42 PM »

Bro mcbry/tsong;

ang gaganda naman ng mga set-up ninyo na kakainggit...

enjoy!
positive-noise.

t_s_o_n_g · « **Reply #2271 on:** Nov 04, 2004 at 12:43 PM »

Ano ba ang magandang pang jumper... audience or XLO???

odyopayl · « **Reply #2272 on:** Nov 04, 2004 at 12:48 PM »

Quote from: t_s_o_n_g on Nov 04, 2004 at 12:43 PM

Ano ba ang magandang pang jumper... audience or XLO???

I think pareho lang yan! Wala pa 2 inches ang length nyan, better than stock solid strips. (IMHO)

H a n $ · « **Reply #2273 on:** Nov 05, 2004 at 09:14 AM »

Quote from: t_s_o_n_g on Nov 04, 2004 at 12:43 PM

Ano ba ang magandang pang jumper... audience or XLO???

I'll go for audience for jumper..

Control · « **Reply #2274 on:** Nov 05, 2004 at 11:44 AM »

Quote from: p A s 0 kGuBaT on Nov 05, 2004 at 09:14 AM

I'll go for audience for jumper..

Sir, Mas mura ba ang Audience kaysa sa XLO Pro?

Superman · « **Reply #2275 on:** Nov 05, 2004 at 01:40 PM »

tindi ng mga monicker ah...sisidlawa and pasokgubat...

pang seiko films ang dating ah!

mcbry · « **Reply #2276 on:** Nov 05, 2004 at 02:13 PM »

Quote from: Control on Nov 05, 2004 at 11:44 AM

Sir, Mas mura ba ang Audience kaysa sa XLO Pro?

sir, mas mura yata ang audience kaysa xlo pro.

audience around 95/ft... xlo pro around 195/ft

H a n $ · « **Reply #2277 on:** Nov 05, 2004 at 02:57 PM »

Quote from: Superman on Nov 05, 2004 at 01:40 PM

tindi ng mga monicker ah...sisidlawa and pasokgubat...

pang seiko films ang dating ah!

Inspired kami kay Akyatbundok...

Control · « **Reply #2278 on:** Nov 05, 2004 at 03:38 PM »

Quote from: mcbry on Nov 05, 2004 at 02:13 PM

sir, mas mura yata ang audience kaysa xlo pro.

audience around 95/ft... xlo pro around 195/ft

Thank you sir..

t_s_o_n_g · « **Reply #2279 on:** Nov 05, 2004 at 04:18 PM »

Does anybody hear used onkyo receivers to drive their B4? How's the performance compared to HK/B4 combi?