Author Topic: speaker wire extension  (Read 1114 times)

0 Members and 1 Guest are viewing this topic.

Offline mackio

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
speaker wire extension
« on: Oct 12, 2012 at 06:07 PM »
Good day mga sir. Newbie question lang po. Malaki ba magiging resulta sa quality ng sound kung nagkakaroon ng dugtong yung speaker wire? Thanks in advance!

Offline qguy

  • Trade Count: (+18)
  • PinoyDVD Legend
  • *****
  • Posts: 3,763
  • Usher/Rythmik/S
  • Liked:
  • Likes Given: 66
Re: speaker wire extension
« Reply #1 on: Oct 12, 2012 at 06:27 PM »
As long as your connection is ok, there should not be an issue,  if you look at it, ang daming dugtong ng speaker wire mo. Sa amp loob may isang set speaker wire, then naka duktong sa speaker wire mo, then sa loob ng speaker box may 2 dalawang duktong pa yan...

Offline Timithekid

  • Trade Count: (+26)
  • PinoyDVD Legend
  • *****
  • Posts: 2,642
  • Peace out! :)
  • Liked:
  • Likes Given: 16
Re: speaker wire extension
« Reply #2 on: Oct 12, 2012 at 06:54 PM »
If you are going to use it for a pair of speakers make sure na yung may dugtong pantay ang haba doon sa wala.
PS51E550
BD5500
Marantz 5007/DV500
B&W/Klipsch/SVS
Audio: AMX/Klipsch

Offline mackio

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: speaker wire extension
« Reply #3 on: Oct 12, 2012 at 08:17 PM »
Thanks mga sir! noted.

Offline odyopayl

  • Trade Count: (+22)
  • DVD Guru
  • ****
  • Posts: 1,801
  • Smell The Flower While You Can............
  • Liked:
  • Likes Given: 0
Re: speaker wire extension
« Reply #4 on: Oct 12, 2012 at 09:57 PM »
Good day mga sir. Newbie question lang po. Malaki ba magiging resulta sa quality ng sound kung nagkakaroon ng dugtong yung speaker wire? Thanks in advance!
[/quote
If the quality of your splicing is not good it might affect your sound in the future due to poor contact cause by corroded wire (Cu wire can easily tarnish overtime due to Humidity in our country). Make sure you splice both end at least 1"inch away from each other to avoid shorting in case your insulation (tape ) for whatever reason disappear.  Better if you can Solder them then cover it with shrinkable tube.
odyopayl
octaver (wiredstate)

Offline mackio

  • Trade Count: (0)
  • Apprentice
  • *
  • Posts: 15
  • Liked:
  • Likes Given: 0
Re: speaker wire extension
« Reply #5 on: Oct 13, 2012 at 10:32 AM »
Tnx sir!