Author Topic: JojoD's Tube and Solid State Projects  (Read 1206439 times)

0 Members and 8 Guests are viewing this topic.

Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9570 on: Jan 12, 2014 at 06:00 PM »
Nice to have soft start brader, but not really nec. since vacuum naman yung iooperate nya. Current draw minimized will be very good for the lines though.
Baka may option ka na rin ng remote control ah? Hehehehe

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9571 on: Jan 13, 2014 at 10:31 AM »
Nice to have soft start brader, but not really nec. since vacuum naman yung iooperate nya. Current draw minimized will be very good for the lines though.
Baka may option ka na rin ng remote control ah? Hehehehe

Brader linawin ko lang, it's about 7 seconds for the vacuum to shutoff after the power tool has been switched off right? How about during switch on? Ok lang sabay na sila once the autovac senses the power tool?

Bluetooth lang brader.

Offline JoeyGS

  • Trade Count: (+28)
  • PinoyDVD Legend
  • *****
  • Posts: 2,717
  • Let your ears decide!
  • Liked:
  • Likes Given: 181
Re: JojoD's Tube and Solid State Projects
« Reply #9572 on: Jan 13, 2014 at 10:53 AM »
Magaling ka na brader?

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9573 on: Jan 13, 2014 at 11:02 AM »
Magaling ka na brader?


Magaling na brader! Salamat sa mga well wishers at advices, effective ang soup at pahinga (sama na movie marathon hehehe).

Pero desk work lang muna ako ngayon Monday, sabi ko sa sarili ko bukas na ako hahawak ng power tools. ;D


Offline JoeyGS

  • Trade Count: (+28)
  • PinoyDVD Legend
  • *****
  • Posts: 2,717
  • Let your ears decide!
  • Liked:
  • Likes Given: 181
Re: JojoD's Tube and Solid State Projects
« Reply #9574 on: Jan 13, 2014 at 11:39 AM »
Tama yan.  Give your body time to rest and heal.  Mas mahirap ang relapse.




Magaling na brader! Salamat sa mga well wishers at advices, effective ang soup at pahinga (sama na movie marathon hehehe).

Pero desk work lang muna ako ngayon Monday, sabi ko sa sarili ko bukas na ako hahawak ng power tools. ;D



Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9575 on: Jan 13, 2014 at 11:46 AM »
Tama yan.  Give your body time to rest and heal.  Mas mahirap ang relapse.





Thanks thanks!

Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9576 on: Jan 13, 2014 at 11:50 AM »
Brader linawin ko lang, it's about 7 seconds for the vacuum to shutoff after the power tool has been switched off right? How about during switch on? Ok lang sabay na sila once the autovac senses the power tool?

Bluetooth lang brader.
Mismo brader! As for the remote.... Option lang yan kung sakali fixed ang dust collection sa isang tabi at gumagamit ng blast gates. Wala pa naman meron samin nun.

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9577 on: Jan 13, 2014 at 12:19 PM »
Mismo brader! As for the remote.... Option lang yan kung sakali fixed ang dust collection sa isang tabi at gumagamit ng blast gates. Wala pa naman meron samin nun.

Okies, salamat sa info brader. Ah in that case pwede na pala ito muna ang develop ko, need ko na din asap. Punong-puno ako ng saw dust at chippings nun nag router ako eh!

Parang gusto ko na tuloy pumasyal sa ACE mamaya at kunin yun shopvac na naka sale sa kanila.

Offline joey

  • Trade Count: (+2)
  • Collector
  • **
  • Posts: 404
  • Liked:
  • Likes Given: 0
Re: JojoD's Tube and Solid State Projects
« Reply #9578 on: Jan 15, 2014 at 06:30 PM »
brader, kelan ka magagawi ng manila? miss kona amp natin...

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9579 on: Jan 15, 2014 at 08:51 PM »
brader, kelan ka magagawi ng manila? miss kona amp natin...


oo nga pala, negative ko pa alam brader at designated driver ako sa chemo ni father in law. next week baka pwede ako dun sa sinabi ko meeting place pero kung di ka pwede starting sa 27th everyday nasa jose reyes ako sa umaga.

Offline joey

  • Trade Count: (+2)
  • Collector
  • **
  • Posts: 404
  • Liked:
  • Likes Given: 0
Re: JojoD's Tube and Solid State Projects
« Reply #9580 on: Jan 16, 2014 at 09:04 AM »
oo nga pala, negative ko pa alam brader at designated driver ako sa chemo ni father in law. next week baka pwede ako dun sa sinabi ko meeting place pero kung di ka pwede starting sa 27th everyday nasa jose reyes ako sa umaga.

noted brader. pray namin for fast recovery father in law mo...

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9581 on: Jan 16, 2014 at 09:35 AM »
noted brader. pray namin for fast recovery father in law mo...


thanks brader! next week, baka magawi ka Caloocan let me know...


Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9582 on: Jan 16, 2014 at 08:38 PM »
Problem: My Skil 1827 did not come with a vacuum attachment accessory, I think it's sold separately but nobody seems to have one.

Solution: Fabricate and DIY


Made this from a piece of 1" PVC, heated it on the stove and straightened a portion of the pipe.




Drilled a couple of holes that corresponds to the supposed to be holes for the vacuum attachment...



And it fits quite nicely... hope it works though...





Cheers

Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9583 on: Jan 17, 2014 at 04:13 AM »
Nice work Jo, consider adding a plexiglass shroud to concentrate the suction better....
Cheers

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9584 on: Jan 17, 2014 at 10:43 AM »
Thanks Timbs. I can do that... actually there is already a dust shield in front, so all I need to do is one for the back and it would be complete.

Cheers

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9585 on: Jan 17, 2014 at 08:49 PM »
I can now run my vacuum automatically, focus my attention on the work in front of me and the power tool in my hands. 8)

Runs with my router, circular saw and orbital sander. Even the darn hand drill can trigger it. ;D





Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9586 on: Jan 17, 2014 at 09:05 PM »
I can now run my vacuum automatically, focus my attention on the work in front of me and the power tool in my hands. 8)

Runs with my router, circular saw and orbital sander. Even the darn hand drill can trigger it. ;D


Pwede rin kaya sa drill ko yan? 18volts yun



Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9587 on: Jan 17, 2014 at 10:47 PM »
Ha! Cordless yun eh! :P


Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9588 on: Jan 20, 2014 at 10:26 PM »
For my daughter's tube rolling needs... :D



:P


I applied sanding sealer pa...




Mahilig din mag tube rolling... ;D ;D ;D


Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9589 on: Jan 21, 2014 at 12:50 AM »
Your daughter would be very happy... Congrats.

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9590 on: Jan 21, 2014 at 06:48 PM »
Yep she is quite happy with the build, another scientist in the making...

Offline geriboy

  • Trade Count: (+69)
  • DVD Addict
  • ***
  • Posts: 864
  • Liked:
  • Likes Given: 13
Re: JojoD's Tube and Solid State Projects
« Reply #9591 on: Jan 21, 2014 at 06:58 PM »
For my daughter's tube rolling needs... :D
...
Mahilig din mag tube rolling... ;D ;D ;D

Yep she is quite happy with the build, another scientist in the making...

for test tubes? :)

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9592 on: Jan 21, 2014 at 07:06 PM »
for test tubes? :)

Yes Doc! For her chemistry set.

Pero pwede din pang EL34... ;D


Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9593 on: Jan 21, 2014 at 07:54 PM »
WIP for today... my FJJ project...

laser cut template, 1/2" finger to finger




preparing the beam ala Leigh R9






screwed a sacrificial layer to the beam...




opening up holes for the f-clamps to go through...




attaching the template to the beam... screw holes countersunk to maintain a flat template to router contact...




put in an offset equal to one finger on the right side, squared and screwed...




screwed and squared the left stop...




test piece...





 8)

Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9594 on: Jan 21, 2014 at 08:01 PM »
Yan, that will raise your joinery level by two. How is the fit, looks a bit loose from the picture. Congrats brad....

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9595 on: Jan 21, 2014 at 08:04 PM »
Actually mahigpit siya brad, tumatayo na kahit walang glue. Sinadya ko lang flush para may ma-trim pa yun excess.

Kailangan ko na yata ng isa pa router o trimmer...  :P

Offline timber715

  • Trade Count: (+29)
  • PinoyDVD Legend
  • *****
  • Posts: 2,998
  • join us at www.cab1net.com
  • Liked:
  • Likes Given: 16
Re: JojoD's Tube and Solid State Projects
« Reply #9596 on: Jan 21, 2014 at 08:09 PM »
Actually mahigpit siya brad, tumatayo na kahit walang glue. Sinadya ko lang flush para may ma-trim pa yun excess.

Kailangan ko na yata ng isa pa router o trimmer...  :P
Kailangan talaga brader... Hehehe

Offline Gino

  • Trade Count: (+7)
  • PinoyDVD Legend
  • *****
  • Posts: 2,200
  • Audiophiliac
  • Liked:
  • Likes Given: 2
Re: JojoD's Tube and Solid State Projects
« Reply #9597 on: Jan 21, 2014 at 08:23 PM »
Kala ko tumayo ng walang Viagra®

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9598 on: Jan 21, 2014 at 08:27 PM »
Kailangan talaga brader... Hehehe


Now I understand kung bakit ang dami mo router brader. ;)

May nahukay ako na 15 year old vacuum last weekend, mas malaki siya sa classic 20 kaya pwede na muna ito kaysa naman dun sa turbo vac ng ACE na ang bilis mapuno hehehe. Sabi ko pa naman mukhang nakatipid ako kasi di na ako bibili ng vacuum cleaner, yun pala malamang sa router/trimmer mapunta. ;D

Excited na ako sa mga future audio projects! 8)

Offline JojoD818

  • Trade Count: (+147)
  • PinoyDVD Legend
  • *****
  • Posts: 14,558
  • Bring it on!
  • Liked:
  • Likes Given: 57
Re: JojoD's Tube and Solid State Projects
« Reply #9599 on: Jan 21, 2014 at 08:28 PM »
Kala ko tumayo ng walang Viagra®


Uy di ko pa kailangan niyan ha ;D ;D ;D