Author Topic: JojoD's Tube and Solid State Projects (Read 1136099 times)

Onkyo606 · « **Reply #5040 on:** Jan 27, 2011 at 01:49 AM »

Quote from: timber715 on Jan 27, 2011 at 12:57 AM

almost 2" yun brader, tignan ko na lang kung ano magagawa ko para sa yo... text kita...

ok na yun sir sonny kung almost 2 inches lang para di na kailangan nipisan as is na yung thinckness nya

Cjtjader · « **Reply #5041 on:** Jan 27, 2011 at 06:34 AM »

Quote from: timber715 on Jan 27, 2011 at 12:57 AM

almost 2" yun brader, tignan ko na lang kung ano magagawa ko para sa yo... text kita...

sayang tulog na yung isa...

BEAUTIFUL!!! Pwde na kaya ito mamaya???

Maraming salamat sir sonny!!!

macdon · « **Reply #5042 on:** Jan 27, 2011 at 01:14 PM »

Master - baka daw pwede mo magawan si kapitana Mike ng speaker switcher for svs demo speakers

May loss ba daw kung gagamit ng switcher?

Paki contact nalang daw si kapitana Mike

nizmo · « **Reply #5043 on:** Jan 27, 2011 at 01:50 PM »

Quote from: cjtjader on Jan 27, 2011 at 06:34 AM

BEAUTIFUL!!! Pwde na kaya ito mamaya??? Maraming salamat sir sonny!!!

di na makatiis si brader Cal...

ganda...Congrats, swak yan sa Contour!

Cjtjader · « **Reply #5044 on:** Jan 27, 2011 at 02:09 PM »

Quote from: nizmo on Jan 27, 2011 at 01:50 PM

di na makatiis si brader Cal...
ganda...Congrats, swak yan sa Contour!

korek po! Picture pa lang eh mganda na......Salamat po sa kahoy nyo!!

at sa blessed hands ni sonny!

nizmo · « **Reply #5045 on:** Jan 27, 2011 at 02:17 PM »

Quote from: cjtjader on Jan 27, 2011 at 02:09 PM

korek po! Picture pa lang eh mganda na......Salamat po sa kahoy nyo!! at sa blessed hands ni sonny!

welcome po.
sana mapalitan din ng ganyan yung base ng AGA

p.s.
pwede daw pala sabi ni dok endrik

Cjtjader · « **Reply #5046 on:** Jan 27, 2011 at 02:24 PM »

Quote from: nizmo on Jan 27, 2011 at 02:17 PM

welcome po.
sana mapalitan din ng ganyan yung base ng AGA

p.s.
pwede daw pala sabi ni dok endrik

Ay.... swak daw po para kay AGA!!

Onkyo606 · « **Reply #5047 on:** Jan 27, 2011 at 02:33 PM »

Quote from: cjtjader on Jan 27, 2011 at 02:24 PM

Ay.... swak daw po para kay AGA!!

mahilig ba si aga sa muse?

parang yung ang intindi ko eh o mali ang aking sapantaha

mike c · « **Reply #5048 on:** Jan 27, 2011 at 03:44 PM »

Quote from: macdon on Jan 27, 2011 at 01:14 PM

Master - baka daw pwede mo magawan si kapitana Mike ng speaker switcher for svs demo speakers

May loss ba daw kung gagamit ng switcher?

Paki contact nalang daw si kapitana Mike

opo sir jojo, baka-puwedeng magpagawa 4 (or 3) pairs to 1 lang siguro

nizmo · « **Reply #5049 on:** Jan 27, 2011 at 03:52 PM »

Quote from: Onkyo606 on Jan 27, 2011 at 02:33 PM

mahilig ba si aga sa muse?

parang yung ang intindi ko eh o mali ang aking sapantaha

indi brader Tirso...yung Dina ni brader Cal....Muse

moonshow · « **Reply #5050 on:** Jan 27, 2011 at 04:31 PM »

Hi Jojod

quick question about amps, if an amp is rated at 100 watts, is that when the volume is at maximum setting? or at any volume 100 watts un power output nya? ex, when an amp is at 40 % volume, 40 watts lang un power output nya?

JojoD818 · « **Reply #5051 on:** Jan 27, 2011 at 06:19 PM »

Quote from: macdon on Jan 27, 2011 at 01:14 PM

Master - baka daw pwede mo magawan si kapitana Mike ng speaker switcher for svs demo speakers

May loss ba daw kung gagamit ng switcher?

Paki contact nalang daw si kapitana Mike

Brader Mac, sige will contact kapitana Mike for the bilateral amp/speaker switcher.

No loss to worry about Brader, promise.

Thanks!

JojoD818 · « **Reply #5052 on:** Jan 27, 2011 at 06:21 PM »

Quote from: mike c on Jan 27, 2011 at 03:44 PM

opo sir jojo, baka-puwedeng magpagawa 4 (or 3) pairs to 1 lang siguro

Uy Sir Mike dito ka na pala hehehe... sige PM kita mamaya sir.

JojoD818 · « **Reply #5053 on:** Jan 27, 2011 at 06:26 PM »

Quote from: moonshow on Jan 27, 2011 at 04:31 PM

Hi Jojod

quick question about amps, if an amp is rated at 100 watts, is that when the volume is at maximum setting? or at any volume 100 watts un power output nya? ex, when an amp is at 40 % volume, 40 watts lang un power output nya?

Sir,

Amp ratings vary a lot, but the consensus is that if the amp is rated at 100W then that is at it's maximum volume without clipping. 40% volume equals 40W output is a big NO, it doesn't work that way, unless you will only listen to a single frequency sine wave (test tone). Music is composed of different frequency modulations, with a multitude of peaks and valleys so in simplest terms, music "magnitude" is always changing so it is not a very good gauge of an amps output power.

Cheers

moonshow · « **Reply #5054 on:** Jan 27, 2011 at 06:41 PM »

Thanks for the explanation

Cjtjader · « **Reply #5055 on:** Jan 27, 2011 at 07:03 PM »

Quote from: Onkyo606 on Jan 27, 2011 at 02:33 PM

mahilig ba si aga sa muse?

parang yung ang intindi ko eh o mali ang aking sapantaha

Mali! .......

Quote from: nizmo on Jan 27, 2011 at 03:52 PM

indi brader Tirso...yung Dina ni brader Cal....Muse

Nagtatanong lang po!

.......Bka si AGA ay may MUSE?

JojoD818 · « **Reply #5056 on:** Jan 27, 2011 at 10:32 PM »

Quote from: moonshow on Jan 27, 2011 at 06:41 PM

Thanks for the explanation

Welcome

JojoD818 · « **Reply #5057 on:** Jan 27, 2011 at 10:43 PM »

City Engineer's Office, Valenzuela City
Electrical Permit No. XXXXXXXX Series of 2011

Onkyo606 · « **Reply #5058 on:** Jan 27, 2011 at 10:48 PM »

ayan na nag babadya na ang HT wooohoooooo

Cjtjader · « **Reply #5059 on:** Jan 27, 2011 at 10:55 PM »

Quote from: Onkyo606 on Jan 27, 2011 at 10:48 PM

ayan na nag babadya na ang HT wooohoooooo

TINTINTININ!!!

JojoD818 · « **Reply #5060 on:** Jan 27, 2011 at 11:04 PM »

Thanks Braders!

Slowly lang pero ok lang dami responsibilities din eh...

Done the electrical harness for the lighting and dedicated branch for the HT, nakahanda na kaya ilalatag na lang yan once I'm able to remove the ceilings for replacement.

Pati yun sa surrounds and surround back channels, used Philflex #16 lang for a 5 meter run per speaker. Ilalatag na lang din yan sa ceiling.

timber715 · « **Reply #5061 on:** Jan 27, 2011 at 11:12 PM »

goodluck sa ht mo master, looking good so far...

JojoD818 · « **Reply #5062 on:** Jan 27, 2011 at 11:19 PM »

Quote from: timber715 on Jan 27, 2011 at 11:12 PM

goodluck sa ht mo master, looking good so far...

hey Brader thanks, kamusta na nga pala? malapit na ba ang Harbeths natin diyan?

btw, I'll be making a simple rack out of marine ply left overs muna para lang may pagpatungan yun receiver and media players. simple glued and screwed (ang sama naman pakinggan) rack lang muna gagawin ko Brader, quick fix muna. pag naka setup na lahat tsaka na makapagpagawa na ng proper rack.

timber715 · « **Reply #5063 on:** Jan 27, 2011 at 11:26 PM »

Quote from: JojoD818 on Jan 27, 2011 at 11:19 PM

hey Brader thanks, kamusta na nga pala? malapit na ba ang Harbeths natin diyan?

btw, I'll be making a simple rack out of marine ply left overs muna para lang may pagpatungan yun receiver and media players. simple glued and screwed (ang sama naman pakinggan) rack lang muna gagawin ko Brader, quick fix muna. pag naka setup na lahat tsaka na makapagpagawa na ng proper rack.

sige brader, if you want me to do it for you, just let me know...

but I do know you are very much capable

JojoD818 · « **Reply #5064 on:** Jan 27, 2011 at 11:31 PM »

Quote from: timber715 on Jan 27, 2011 at 11:26 PM

sige brader, if you want me to do it for you, just let me know... but I do know you are very much capable

thanks Brader, I know you are busy din with the bosses (same tayo) kaya puro advise lang muna seek ko.

speaking of being capable, naghasa ako ng talim ng katam kanina, tawa ako ng tawa kasi hindi tumatalon yun buhok ko sa braso!

timber715 · « **Reply #5065 on:** Jan 27, 2011 at 11:35 PM »

parang suklay ba?

JojoD818 · « **Reply #5066 on:** Jan 27, 2011 at 11:37 PM »

Quote from: timber715 on Jan 27, 2011 at 11:35 PM

parang suklay ba?

na-puputol or na-aahit naman niya yun balahibo ko sa braso pero ayaw tumalon hahaha!

JoeyGS · « **Reply #5067 on:** Jan 28, 2011 at 08:35 AM »

Hi Jojo,

When you re-do your ceiling, providing access manholes in strategic areas is recommended. But also plan the location para maganda din tingnan.

Alam mo naman na we need that for the never ending testing and replacement of gears.

Another thing....papalitan mo ba yung mga existing knife switch/fuse panle boards with circuit breakers?

Regards,
Joey

JojoD818 · « **Reply #5068 on:** Jan 28, 2011 at 08:41 AM »

Quote from: JoeyGS on Jan 28, 2011 at 08:35 AM

Hi Jojo,

When you re-do your ceiling, providing access manholes in strategic areas is recommended. But also plan the location para maganda din tingnan.

Alam mo naman na we need that for the never ending testing and replacement of gears.

Another thing....papalitan mo ba yung mga existing knife switch/fuse panle boards with circuit breakers?

Regards,
Joey

Sir Joey,

Yup, the access panel is located in the adjacent room, however the crawl space are is not Jojo-friendly though.

I plan to retain the 60A knife switch for the whole house but have a separate 30A circuit breaker for the HT/Audio. Or whichever is best of course, I still haven't thought of that yet.

Thanks for the advice, keep 'em coming

timber715 · « **Reply #5069 on:** Jan 28, 2011 at 11:55 AM »

Quote from: JojoD818 on Jan 28, 2011 at 08:41 AM

Thanks for the advice, keep 'em coming

uy ako meron... keep lots of extra money for unexpected materials you will need and want that you cannot forsee

usually they are the expensive ones too.