Author Topic: JojoD's Tube and Solid State Projects (Read 1136377 times)

JojoD818 · « **Reply #9180 on:** Oct 16, 2013 at 02:03 PM »

Quote from: moonshow on Oct 16, 2013 at 01:57 PM

Bro Jojod

How do you remove a tube from a babyT amp?

i tried pulling it with considerable force but it wont dislodge from the socket?is there a screw somewhere?

The sockets are just tight, there's no screw holder the tubes. Firmly grip the tube and pull it upwards. You can move it side to side but please be careful and only do small movements when you do.

metropharm · « **Reply #9181 on:** Oct 21, 2013 at 10:21 PM »

Quote from: JojoD818 on Aug 25, 2013 at 06:30 PM

active, purpose driven, custom amp and speaker switcher for a setup in Lucena City...

for commitment and quality assurance

please ask permission before hot linking any of my images, thanks!

sir magkano ito speaker and amp.switcher?thanks

JojoD818 · « **Reply #9182 on:** Oct 21, 2013 at 11:11 PM »

replied already to your PM sir.

thanks

markcrenz · « **Reply #9183 on:** Oct 22, 2013 at 07:50 AM »

nag-meet na ba sina raul and betsy? sigurado sandali lang gumawa ng inductors dyan!

Quote from: JojoD818 on Oct 16, 2013 at 02:03 PM

The sockets are just tight, there's no screw holder the tubes. Firmly grip the tube and pull it upwards. You can move it side to side but please be careful and only do small movements when you do.

pwede siguro suutan ng ~~condom~~ hotdog-shaped balloon yung tube para mas madali hugutin.

Quote from: moonshow on Oct 16, 2013 at 01:57 PM

Bro Jojod

How do you remove a tube from a babyT amp?

i tried pulling it with considerable force but it wont dislodge from the socket?is there a screw somewhere?

JojoD818 · « **Reply #9184 on:** Oct 22, 2013 at 08:29 AM »

Quote from: markcrenz on Oct 22, 2013 at 07:50 AM

nag-meet na ba sina raul and betsy? sigurado sandali lang gumawa ng inductors dyan!

pwede siguro suutan ng ~~condom~~ hotdog-shaped balloon yung tube para mas madali hugutin.

nagkita na sila! pero di pa sila magkasama hehehe... kailangan ni raul nun flexible coupling para hindi stressed ang bearings niya... (natatawa ako habang type ko ito

)

pag natapos ito mark napakadali na gumawa ng coils and transformers, pindot na lang or foot switch.

yun balloon na ginagamit sa kiddie parties pwede pero wag condom kasi may lubricant baka dumulas sa kamay yun tubes

JojoD818 · « **Reply #9185 on:** Oct 27, 2013 at 01:02 AM »

Back in the game... preamp for the iPod, Xbox and PS3 consoles...

Powered by Burr-Brown

JojoD818 · « **Reply #9186 on:** Oct 28, 2013 at 12:48 PM »

HT naman pag holiday...

JojoD818 · « **Reply #9187 on:** Oct 28, 2013 at 09:46 PM »

Tube Buffer

praktikal · « **Reply #9188 on:** Oct 28, 2013 at 09:50 PM »

TL!!!

George SJ · « **Reply #9189 on:** Oct 28, 2013 at 11:33 PM »

ok yan sir jojo. ung katabi ba ng buffer ay Aikido pre amp?

JoeyGS · « **Reply #9190 on:** Oct 29, 2013 at 10:32 AM »

Nice! suwerte makakakuha niyan!

Quote from: JojoD818 on Oct 28, 2013 at 09:46 PM

Tube Buffer

JojoD818 · « **Reply #9191 on:** Oct 29, 2013 at 12:22 PM »

Quote from: praktikal on Oct 28, 2013 at 09:50 PM

TL!!!

salamats!

Quote from: MajorKonig on Oct 28, 2013 at 11:33 PM

ok yan sir jojo. ung katabi ba ng buffer ay Aikido pre amp?

ok naman sir thanks.

JojoD818 · « **Reply #9192 on:** Oct 29, 2013 at 12:24 PM »

Quote from: JoeyGS on Oct 29, 2013 at 10:32 AM

Nice! suwerte makakakuha niyan!

Naglaro kami COD maghapon yan ang gamit namin sarap hehehe...

JojoD818 · « **Reply #9193 on:** Oct 29, 2013 at 10:27 PM »

put on some charming ss allen bolts in...

Superman · « **Reply #9194 on:** Oct 29, 2013 at 10:59 PM »

Nice one, Jo!

JojoD818 · « **Reply #9195 on:** Oct 30, 2013 at 01:07 AM »

Quote from: Superman on Oct 29, 2013 at 10:59 PM

Nice one, Jo!

Hey Jen thanks!

JojoD818 · « **Reply #9196 on:** Nov 01, 2013 at 09:32 AM »

Welcome to the Baby G club sir Jose...

endrik35 · « **Reply #9197 on:** Nov 01, 2013 at 09:40 AM »

Quote from: JojoD818 on Oct 28, 2013 at 09:46 PM

Tube Buffer

That is one helluva good looking tube buffer!!! woot woot!:)

frootloops · « **Reply #9198 on:** Nov 01, 2013 at 01:02 PM »

Mabuti pa dito may progress eh....ganda Master!

Narayan · « **Reply #9199 on:** Nov 01, 2013 at 01:14 PM »

Quote from: frootloops on Nov 01, 2013 at 01:02 PM

Mabuti pa dito may progress eh....ganda Master!

Quote from: endrik35 on Nov 01, 2013 at 09:40 AM

That is one helluva good looking tube buffer!!! woot woot!:)

+1000 Jojo

JojoD818 · « **Reply #9200 on:** Nov 01, 2013 at 11:59 PM »

Quote from: endrik35 on Nov 01, 2013 at 09:40 AM

That is one helluva good looking tube buffer!!! woot woot!:)

Thank you sir!

Quote from: frootloops on Nov 01, 2013 at 01:02 PM

Mabuti pa dito may progress eh....ganda Master!

Hahaha update din brader pag may time... thanks!

Quote from: Narayan on Nov 01, 2013 at 01:14 PM

+1000 Jojo

Sir kumustamos?! Thanks thanks

JojoD818 · « **Reply #9201 on:** Nov 02, 2013 at 10:54 AM »

dumating na ang mga paleta! mukhang matutuloy na ang aking simple DJing rig and laptop rack project...

made from recycled wood...

George SJ · « **Reply #9202 on:** Nov 03, 2013 at 03:49 PM »

sir jojo I have pm.

JojoD818 · « **Reply #9203 on:** Nov 03, 2013 at 10:34 PM »

Quote from: MajorKonig on Nov 03, 2013 at 03:49 PM

sir jojo I have pm.

Just saw it sir, thanks!

JojoD818 · « **Reply #9204 on:** Nov 03, 2013 at 10:37 PM »

puro butt-joints lang muna, di pa ako marunong nun naka suksok hehehe...

timber715 · « **Reply #9205 on:** Nov 03, 2013 at 11:49 PM »

Brader, check mo kreg pocket hole jig... Baka magustuhan mo.

JojoD818 · « **Reply #9206 on:** Nov 04, 2013 at 02:08 AM »

Quote from: timber715 on Nov 03, 2013 at 11:49 PM

Brader, check mo kreg pocket hole jig... Baka magustuhan mo.

sakto ang post mo brader nanonood ako nun dowel joints hehehe...

astig yun kreg jig! budget friendly ba siya?

jjohnc · « **Reply #9207 on:** Nov 04, 2013 at 02:15 AM »

Bro, I admire your work..are joining the show this wk?

JojoD818 · « **Reply #9208 on:** Nov 04, 2013 at 02:22 AM »

Hi there John, unfortunately not this year bro, I have a prior engagement I cannot run from. I will still try to drop by though, it's a once in a year gathering that shouldn't be missed.

timber715 · « **Reply #9209 on:** Nov 04, 2013 at 02:23 AM »

Quote from: JojoD818 on Nov 04, 2013 at 02:08 AM

sakto ang post mo brader nanonood ako nun dowel joints hehehe...

astig yun kreg jig! budget friendly ba siya?

Meron sa site namin meron din sa sulit. Hanapin mo lang yung seller na si JayL. Ok yun, sabihan mo lang friend mo ko at ako nagrecommend sayo... Btw, you only need a kreg jr and several clamps.