Topic: JojoD's Tube and Solid State Projects

[timber715]

Nice to have soft start brader, but not really nec. since vacuum naman yung iooperate nya. Current draw minimized will be very good for the lines though.
Baka may option ka na rin ng remote control ah? Hehehehe

[JojoD818]

Nice to have soft start brader, but not really nec. since vacuum naman yung iooperate nya. Current draw minimized will be very good for the lines though.
Baka may option ka na rin ng remote control ah? Hehehehe

Brader linawin ko lang, it's about 7 seconds for the vacuum to shutoff after the power tool has been switched off right? How about during switch on? Ok lang sabay na sila once the autovac senses the power tool?

Bluetooth lang brader.

[JoeyGS]

Magaling ka na brader?

[JojoD818]

Magaling ka na brader?

Magaling na brader! Salamat sa mga well wishers at advices, effective ang soup at pahinga (sama na movie marathon hehehe).

Pero desk work lang muna ako ngayon Monday, sabi ko sa sarili ko bukas na ako hahawak ng power tools.

[JoeyGS]

Tama yan.  Give your body time to rest and heal.  Mas mahirap ang relapse.

Magaling na brader! Salamat sa mga well wishers at advices, effective ang soup at pahinga (sama na movie marathon hehehe).

Pero desk work lang muna ako ngayon Monday, sabi ko sa sarili ko bukas na ako hahawak ng power tools.

[JojoD818]

Tama yan.  Give your body time to rest and heal.  Mas mahirap ang relapse.

Thanks thanks!

[timber715]

Brader linawin ko lang, it's about 7 seconds for the vacuum to shutoff after the power tool has been switched off right? How about during switch on? Ok lang sabay na sila once the autovac senses the power tool?

Bluetooth lang brader.

Mismo brader! As for the remote.... Option lang yan kung sakali fixed ang dust collection sa isang tabi at gumagamit ng blast gates. Wala pa naman meron samin nun.

[JojoD818]

Mismo brader! As for the remote.... Option lang yan kung sakali fixed ang dust collection sa isang tabi at gumagamit ng blast gates. Wala pa naman meron samin nun.

Okies, salamat sa info brader. Ah in that case pwede na pala ito muna ang develop ko, need ko na din asap. Punong-puno ako ng saw dust at chippings nun nag router ako eh!

Parang gusto ko na tuloy pumasyal sa ACE mamaya at kunin yun shopvac na naka sale sa kanila.

[joey]

brader, kelan ka magagawi ng manila? miss kona amp natin...

[JojoD818]

brader, kelan ka magagawi ng manila? miss kona amp natin...

oo nga pala, negative ko pa alam brader at designated driver ako sa chemo ni father in law. next week baka pwede ako dun sa sinabi ko meeting place pero kung di ka pwede starting sa 27th everyday nasa jose reyes ako sa umaga.

[joey]

oo nga pala, negative ko pa alam brader at designated driver ako sa chemo ni father in law. next week baka pwede ako dun sa sinabi ko meeting place pero kung di ka pwede starting sa 27th everyday nasa jose reyes ako sa umaga.

noted brader. pray namin for fast recovery father in law mo...

[JojoD818]

noted brader. pray namin for fast recovery father in law mo...

thanks brader! next week, baka magawi ka Caloocan let me know...

[JojoD818]

Problem: My Skil 1827 did not come with a vacuum attachment accessory, I think it's sold separately but nobody seems to have one.

Solution: Fabricate and DIY


Made this from a piece of 1" PVC, heated it on the stove and straightened a portion of the pipe.




Drilled a couple of holes that corresponds to the supposed to be holes for the vacuum attachment...



And it fits quite nicely... hope it works though...





Cheers

[timber715]

Nice work Jo, consider adding a plexiglass shroud to concentrate the suction better....
Cheers

[JojoD818]

Thanks Timbs. I can do that... actually there is already a dust shield in front, so all I need to do is one for the back and it would be complete.

Cheers

[JojoD818]

I can now run my vacuum automatically, focus my attention on the work in front of me and the power tool in my hands.

Runs with my router, circular saw and orbital sander. Even the darn hand drill can trigger it.

[timber715]

I can now run my vacuum automatically, focus my attention on the work in front of me and the power tool in my hands.

Runs with my router, circular saw and orbital sander. Even the darn hand drill can trigger it.


Pwede rin kaya sa drill ko yan? 18volts yun

[JojoD818]

Ha! Cordless yun eh!

[JojoD818]

For my daughter's tube rolling needs...






I applied sanding sealer pa...




Mahilig din mag tube rolling...

[timber715]

Your daughter would be very happy... Congrats.

[JojoD818]

Yep she is quite happy with the build, another scientist in the making...

[geriboy]

For my daughter's tube rolling needs...
...
Mahilig din mag tube rolling...

Yep she is quite happy with the build, another scientist in the making...

for test tubes?

[JojoD818]

for test tubes?

Yes Doc! For her chemistry set.

Pero pwede din pang EL34...

[JojoD818]

WIP for today... my FJJ project...

laser cut template, 1/2" finger to finger




preparing the beam ala Leigh R9






screwed a sacrificial layer to the beam...




opening up holes for the f-clamps to go through...




attaching the template to the beam... screw holes countersunk to maintain a flat template to router contact...




put in an offset equal to one finger on the right side, squared and screwed...




screwed and squared the left stop...




test piece...





 

[timber715]

Yan, that will raise your joinery level by two. How is the fit, looks a bit loose from the picture. Congrats brad....

[JojoD818]

Actually mahigpit siya brad, tumatayo na kahit walang glue. Sinadya ko lang flush para may ma-trim pa yun excess.

Kailangan ko na yata ng isa pa router o trimmer... 

[timber715]

Actually mahigpit siya brad, tumatayo na kahit walang glue. Sinadya ko lang flush para may ma-trim pa yun excess.

Kailangan ko na yata ng isa pa router o trimmer... 

Kailangan talaga brader... Hehehe

[Gino]

Kala ko tumayo ng walang Viagra®

[JojoD818]

Kailangan talaga brader... Hehehe

Now I understand kung bakit ang dami mo router brader.

May nahukay ako na 15 year old vacuum last weekend, mas malaki siya sa classic 20 kaya pwede na muna ito kaysa naman dun sa turbo vac ng ACE na ang bilis mapuno hehehe. Sabi ko pa naman mukhang nakatipid ako kasi di na ako bibili ng vacuum cleaner, yun pala malamang sa router/trimmer mapunta.

Excited na ako sa mga future audio projects!

[JojoD818]

Kala ko tumayo ng walang Viagra®

Uy di ko pa kailangan niyan ha