Author Topic: JojoD's Tube and Solid State Projects (Read 1136137 times)

Jo, your choice of welding machine is good. Rilon is one of my first choices (well wanted the Miller pero way out of range sa budget) before I got my TIG welding machine. Maganda performance nyan plus magada rin ang support though wala pa akong alam na nasira.
Welcome back brad.... pareho tayo medyo out of commission.

JojoD818 · « **Reply #11651 on:** Apr 12, 2016 at 04:48 PM »

Quote from: JoeyGS on Apr 12, 2016 at 02:22 PM

Tama!

Naalala ko dami ko naiwan projects hahaha! Di bale isa isahin na yan...

JojoD818 · « **Reply #11652 on:** Apr 12, 2016 at 04:53 PM »

Quote from: timber715 on Apr 12, 2016 at 04:46 PM

Jo, your choice of welding machine is good. Rilon is one of my first choices (well wanted the Miller pero way out of range sa budget) before I got my TIG welding machine. Maganda performance nyan plus magada rin ang support though wala pa akong alam na nasira.
Welcome back brad.... pareho tayo medyo out of commission.

Ok siya brader, from purlins to 1/4" angle bars wala ako sakit ng ulo. Pwedeng pwede mag project ng trusses ito. Nun binili ko yan meron ako nakita unit na nalubog sa baha, nilinis lang mabuti gumana pa ulit. Kaya di na ako nagdalawang isip pa, ayos ang support ng Rilon.

Thanks brader, almost 3 months walang action CNC ko...

timber715 · « **Reply #11653 on:** Apr 12, 2016 at 05:19 PM »

Quote from: JojoD818 on Apr 12, 2016 at 04:53 PM

Ok siya brader, from purlins to 1/4" angle bars wala ako sakit ng ulo. Pwedeng pwede mag project ng trusses ito. Nun binili ko yan meron ako nakita unit na nalubog sa baha, nilinis lang mabuti gumana pa ulit. Kaya di na ako nagdalawang isip pa, ayos ang support ng Rilon.

Thanks brader, almost 3 months walang action CNC ko...

ako naman two months tapos ngayon naman nakabaklas ready to move again..... haaaay

JojoD818 · « **Reply #11654 on:** Apr 12, 2016 at 05:58 PM »

Quote from: timber715 on Apr 12, 2016 at 05:19 PM

ako naman two months tapos ngayon naman nakabaklas ready to move again..... haaaay

same predicament pala... di bale back to normal tayo once up and running na lahat...

edrel sison · « **Reply #11655 on:** Apr 12, 2016 at 07:00 PM »

Quote from: JojoD818 on Apr 12, 2016 at 02:15 PM

tao ko yan brad. di mo pa naman yata kailangan, ako now lang din naisabak sa bakbakan yan. 200A siya brader...

Ops sorry will check that brand out again. May AC arc pa kasi nagagamit. Thanks

JojoD818 · « **Reply #11656 on:** Apr 13, 2016 at 10:52 AM »

Quote from: edrel sison on Apr 12, 2016 at 07:00 PM

Ops sorry will check that brand out again. May AC arc pa kasi nagagamit. Thanks

No problem. I wasn't able to precisely meter out the consumption but 6 days of purlin welding, gate fabrication and the electric bill only rose by 400 Pesos. It's very efficient, but if you only use it to weld cores and other light jobs then your traditional welding machine should be more than enough. Portable nga lang ito brad.

JojoD818 · « **Reply #11657 on:** Apr 14, 2016 at 04:48 PM »

very good weather for applying final coat...

timber715 · « **Reply #11658 on:** Apr 14, 2016 at 06:14 PM »

Glad to see that you are not using Pine brad...

at_sunset_blvd · « **Reply #11659 on:** Apr 14, 2016 at 08:30 PM »

Quote from: JojoD818 on Apr 14, 2016 at 04:48 PM

very good weather for applying final coat...

Ganda Brader Jo, Innards nalang yung kulang

Nelson de Leon · « **Reply #11660 on:** Apr 15, 2016 at 02:34 AM »

Medjo OT pero question, kaya ba naging inverter system yun Rilon is because it converts AC to DC? Or because may iba pang technology behind it.

JojoD818 · « **Reply #11661 on:** Apr 15, 2016 at 09:33 AM »

Quote from: timber715 on Apr 14, 2016 at 06:14 PM

Glad to see that you are not using Pine brad...

Why what's wrong with Pine brad? I love using Pine.

My latest money tree project led me to one of this city's biggest lumber mill...

Lots and lots to choose from brader... it was a happy day.

JojoD818 · « **Reply #11662 on:** Apr 15, 2016 at 09:34 AM »

Quote from: at_sunset_blvd on Apr 14, 2016 at 08:30 PM

Ganda Brader Jo, Innards nalang yung kulang

Salpak na lang yan Brader para makapakinig na...

JojoD818 · « **Reply #11663 on:** Apr 15, 2016 at 09:42 AM »

Quote from: Nelson de Leon on Apr 15, 2016 at 02:34 AM

Medjo OT pero question, kaya ba naging inverter system yun Rilon is because it converts AC to DC? Or because may iba pang technology behind it.

Yes and no I think. The way they explained it to me was apart from the AC to DC conversion, which is part of an SMPS power supply whose output is an IGBT (insulated gate bipolar transistor) instead of the usual mosfet. The inverting process happens when they switch the DC within the SMPS. Being transformerless, it's very efficient and very portable.

Again it's IGBT ha... not LGBT.

Narayan · « **Reply #11664 on:** Apr 15, 2016 at 09:49 AM »

Quote from: JojoD818 on Apr 15, 2016 at 09:42 AM

Yes and no I think. The way they explained it to me was apart from the AC to DC conversion, which is part of an SMPS power supply whose output is an IGBT (insulated gate bipolar transistor) instead of the usual mosfet. The inverting process happens when they switch the DC within the SMPS. Being transformerless, it's very efficient and very portable.

Again it's IGBT ha... not LGBT.

Hybrid welding machine then?

JojoD818 · « **Reply #11665 on:** Apr 15, 2016 at 09:56 AM »

Quote from: Narayan on Apr 15, 2016 at 09:49 AM

Hybrid welding machine then?

Hahaha! I was merely reiterating it sir so there won't be any confusion...

JojoD818 · « **Reply #11666 on:** Apr 15, 2016 at 10:23 AM »

For those who PM'd me, here's the picture... dito ko na ipost hirap isa isa PM...

The current adjustment is simple, may knob at digital readout.

Since it's a DC welding machine, one can either weld in DCEN (electrode negative), or DCEP (electrode positive). I find this techniques very useful in welding thin gauge materials.

Hope this helps.

Nelson de Leon · « **Reply #11667 on:** Apr 15, 2016 at 10:29 AM »

Quote from: JojoD818 on Apr 15, 2016 at 09:42 AM

Yes and no I think. The way they explained it to me was apart from the AC to DC conversion, which is part of an SMPS power supply whose output is an IGBT (insulated gate bipolar transistor) instead of the usual mosfet. The inverting process happens when they switch the DC within the SMPS. Being transformerless, it's very efficient and very portable.

Again it's IGBT ha... not LGBT.

That's tukayo for both clarifications.

I got the idea na. Baka nga the use of SMPS for conversion to DC. Meron na din palang ganyan. How much ang damage jan tukayo? Maraming potential yan technology na yan tukayo for power supply!!!

Sent from my ASUS_T00J using Tapatalk 4

Nelson de Leon · « **Reply #11668 on:** Apr 15, 2016 at 10:29 AM »

Quote from: JojoD818 on Apr 15, 2016 at 09:33 AM

Why what's wrong with Pine brad? I love using Pine.

My latest money tree project led me to one of this city's biggest lumber mill...

Lots and lots to choose from brader... it was a happy day.

Tukayo sa Banson ba yan?

Sent from my ASUS_T00J using Tapatalk 4

JojoD818 · « **Reply #11669 on:** Apr 15, 2016 at 10:37 AM »

Quote from: Nelson de Leon on Apr 15, 2016 at 10:29 AM

That's tukayo for both clarifications.

I got the idea na. Baka nga the use of SMPS for conversion to DC. Meron na din palang ganyan. How much ang damage jan tukayo? Maraming potential yan technology na yan tukayo for power supply!!!

Sent from my ASUS_T00J using Tapatalk 4

The last clarification is very important tukayo.

I honestly can't remember the exact amount but it's between 12K and 15K, I also bought some other stuff kasi like welding mask, rods, etc. The supplier also services the units in case of any problems.

Yup, for applications requiring power, IGBT talaga (I-G-B-T). The unit pays for itself because it's very efficient, liit lang binayaran ko sa kuryente sa last project ko.