Author Topic: JojoD's Tube and Solid State Projects (Read 1138065 times)

geriboy · « **Reply #11700 on:** Apr 24, 2016 at 12:55 PM »

Quote from: JojoD818 on Apr 24, 2016 at 12:41 PM

Doc,

Orange tubes are used for electrical installations. The white ones have thicker walls (schedule 80 I think) and are used for hot and cold installations.

May counter yun mga VU meters na yun Doc! hahaha!

Thank you sa info about these tubes/pipes

Kailangan bantayan ang mga VU meters ninyo. Baka sobra ang dumadaan sa mga blue tubes ninyo.

JojoD818 · « **Reply #11701 on:** Apr 24, 2016 at 01:02 PM »

Quote from: geriboy on Apr 24, 2016 at 12:55 PM

Thank you sa info about these tubes/pipes

Kailangan bantayan ang mga VU meters ninyo. Baka sobra ang dumadaan sa mga blue tubes ninyo.

PS: Orange tubes are also used in sanitary/sewer lines.

Calibrated na ang mga VU meters, para sakto ang reading.

JojoD818 · « **Reply #11702 on:** Apr 27, 2016 at 10:41 AM »

Gino · « **Reply #11703 on:** Apr 27, 2016 at 10:46 AM »

He's back!

JojoD818 · « **Reply #11704 on:** Apr 27, 2016 at 06:29 PM »

Quote from: Gino on Apr 27, 2016 at 10:46 AM

He's back!

It's nice to be back bro... cleaned my tools, dslr and even my drones

JojoD818 · « **Reply #11705 on:** Apr 28, 2016 at 12:39 PM »

diet!

JojoD818 · « **Reply #11706 on:** Apr 28, 2016 at 01:29 PM »

successful power up

JoeyGS · « **Reply #11707 on:** Apr 28, 2016 at 05:31 PM »

Tubed buffer?

JojoD818 · « **Reply #11708 on:** Apr 28, 2016 at 11:18 PM »

Quote from: JoeyGS on Apr 28, 2016 at 05:31 PM

Tubed buffer?

Yup.

JojoD818 · « **Reply #11709 on:** Apr 30, 2016 at 02:26 PM »

it works

Gino · « **Reply #11710 on:** Apr 30, 2016 at 02:31 PM »

Hmm mag RC foamies ka na ba?

JojoD818 · « **Reply #11711 on:** Apr 30, 2016 at 02:37 PM »

Wag muna bro...

Pang upcycle ng mga foam and styro for shipping my projects...

JojoD818 · « **Reply #11712 on:** May 08, 2016 at 07:10 PM »

no more dull drill bits

pilot and countersink tool

Thank you Sir!

Nelson de Leon · « **Reply #11713 on:** May 08, 2016 at 10:50 PM »

Maganda yan drill bit sharpener mo! May motor pa that turns the bit. Yun akin manual lang. Where din you get that?

JojoD818 · « **Reply #11714 on:** May 09, 2016 at 12:22 PM »

Manual din pag turn ng chuck/cam nito tukayo. Pinakisuyo ko sa bagahe ng isang kaibigan natin dito.

CoolTOYZPH · « **Reply #11715 on:** May 09, 2016 at 12:26 PM »

Tukayo, are you allowed to fly your drone above the polling places for an aerial shot?

Nelson de Leon · « **Reply #11716 on:** May 09, 2016 at 01:11 PM »

Quote from: JojoD818 on May 09, 2016 at 12:22 PM

Manual din pag turn ng chuck/cam nito tukayo. Pinakisuyo ko sa bagahe ng isang kaibigan natin dito.

yeah pero may motor na that runs the sotne sharpener. Yun akin, which my staff lost, is yun drill bit mounted at an angled holder only. Walang motor.

JojoD818 · « **Reply #11717 on:** May 09, 2016 at 03:21 PM »

Quote from: CoolTOYZPH on May 09, 2016 at 12:26 PM

Tukayo, are you allowed to fly your drone above the polling places for an aerial shot?

Yes tukayo it's allowed naman, unless you are within 5Km of a CAAP declared NFZ.

Actually, the question is - "is it safe" to fly above so many people.

JojoD818 · « **Reply #11718 on:** May 09, 2016 at 03:23 PM »

Quote from: Nelson de Leon on May 09, 2016 at 01:11 PM

yeah pero may motor na that runs the sotne sharpener. Yun akin, which my staff lost, is yun drill bit mounted at an angled holder only. Walang motor.

ah I see, yup tama ka tukayo may motor na ito that turns the diamond grinding stone, 110v nga lang kasi galing siya US. sarap gamitin dami ko na natasahan hehehe...

JojoD818 · « **Reply #11719 on:** May 09, 2016 at 03:51 PM »

dito pa lang sulit na drill doctor...

Nelson de Leon · « **Reply #11720 on:** May 09, 2016 at 05:33 PM »

Quote from: JojoD818 on May 09, 2016 at 03:23 PM

ah I see, yup tama ka tukayo may motor na ito that turns the diamond grinding stone, 110v nga lang kasi galing siya US. sarap gamitin dami ko na natasahan hehehe...

How much tukayo? I might need 2 kung reasonably priced. Isa sa work and isa sa home.

Naalala ko dati, patalasan ng mata and pagalingan ng pulso whenever I sharpen the bits on a bench grinder. Minsan dumulas, nahasa ang isang joint ng finger ko. Haha!

JojoD818 · « **Reply #11721 on:** May 09, 2016 at 07:32 PM »

Quote from: Nelson de Leon on May 09, 2016 at 05:33 PM

How much tukayo? I might need 2 kung reasonably priced. Isa sa work and isa sa home.

Naalala ko dati, patalasan ng mata and pagalingan ng pulso whenever I sharpen the bits on a bench grinder. Minsan dumulas, nahasa ang isang joint ng finger ko. Haha!

Check it out sa Amazon tukayo, naki piggyback lang ako. It's very reasonable, and the mere fact that it kinda pays for itself once you sharpen old dull bits.

Naku mahina din ako sa bench grinder, I made an 18 degree jig pa nga dati pero di ko madali yun chisel point.

timber715 · « **Reply #11722 on:** May 10, 2016 at 11:32 PM »

Nelson, Call Panda Ind'l sales sa Binondo. They carry Drill Doctor locally at 220volts na. 242-61-54 Look for Edward (owner yan) and tell him I recommended you.

Jo, Brader... I am thinking of building a quadcopter and need your expertise. Kindly visit ua sa cab1.... salamat

Nelson de Leon · « **Reply #11723 on:** May 11, 2016 at 12:38 AM »

Quote from: timber715 on May 10, 2016 at 11:32 PM

Nelson, Call Panda Ind'l sales sa Binondo. They carry Drill Doctor locally at 220volts na. 242-61-54 Look for Edward (owner yan) and tell him I recommended you.

Jo, Brader... I am thinking of building a quadcopter and need your expertise. Kindly visit ua sa cab1.... salamat

That is good to hear! Thanks! Duly noted in my calendar, I will call them tomorrow.

JojoD818 · « **Reply #11724 on:** May 11, 2016 at 10:47 AM »

Meron pala si Edward ng DD hehehe, iba kasi naka sched na kukunin ko sa kanya. Anyway... all year long naman ang Pasko...

JojoD818 · « **Reply #11725 on:** May 11, 2016 at 10:52 AM »

Aba mag quad na din oh... ayos!

at_sunset_blvd · « **Reply #11726 on:** May 15, 2016 at 12:30 PM »

Another GOODIE from the Master

Thanks Jo

Cjtjader · « **Reply #11727 on:** May 15, 2016 at 03:46 PM »

Congrats, Bro Kenneth.

JojoD818 · « **Reply #11728 on:** May 15, 2016 at 04:32 PM »

Quote from: at_sunset_blvd on May 15, 2016 at 12:30 PM

Another GOODIE from the Master

Thanks Jo

Very much welcome po sir! And thanks na din for the patience.

Enjoy!

JojoD818 · « **Reply #11729 on:** May 15, 2016 at 04:33 PM »

Quote from: Cjtjader on May 15, 2016 at 03:46 PM

Congrats, Bro Kenneth.

Hey brader kumusta ka na?