Topic: Pioneer Receivers

[Billabong]

I-quote kita because i'm sure, nasasabi mo lang yan ngayon. For now eka.   Masbagay sa iyo ang Elite kasi branded ang mga speaks mo. Ako puro DIY mga HT speaks ko.

Your enclosures are DIY but your speakers are JBL.

When are you going to finish calibrating your Elite SC-68?

[Nelson de Leon]

Your enclosures are DIY but your speakers are JBL.

When are you going to finish calibrating your Elite SC-68?

Nagpapaniwala ka sa cheezmax ni King Markcrenz. Mahilig kasi siyang magparamdam kapag may new gear siya, kunwari ipapasa niya sa iba yun new ger para batiin siya na may new receiver siya. 

[Stagea]

When are you going to finish calibrating your Elite SC-68?

Wow naka SC-68 na pala si Master Nelson! Ayos yan, native support for high resolution pcm and dsd formats via USB, tapos 32 bit audio capable via the PC interface.

[Nelson de Leon]

Wow naka SC-68 na pala si Master Nelson! Ayos yan, native support for high resolution pcm and dsd formats via USB, tapos 32 bit audio capable via the PC interface.

SC-68
S - Shopping
C - Cheap
sa
168

 

[≧◉◡◉≦xrampage≧◉◡◉≦]

SC-68
S - Shopping
C - Cheap
sa
168

 

Puwede puwede. 

[rhodem24]

At last! Na try ko na rin yung Airplay! Hehehe. Hintayin lang pala ng ilang minutes bago ma recognize ng phone ko yung receiver.

[raider125jeigh]

At last! Na try ko na rin yung Airplay! Hehehe. Hintayin lang pala ng ilang minutes bago ma recognize ng phone ko yung receiver.

good
make sure you set max volume on your receiver
baka masira speaker mo kapag tumodo ung lakas...
saka huwag ka magbago ng volume sa iphone/ipod/pc
sa receiver lage

[rhodem24]

Okay bro.. Thanks.. Gamit ko yung iControlAV na app sa iPhone.

One question bro, if DTS format yung movie na i-play ko, hindi ba makita na DTS yung nasa display ng receiver? Wala rin akong ma-set sa modes na dts. Puro Dolby lahat, neo6, neural sound, etc..

[warmaster]

Okay bro.. Thanks.. Gamit ko yung iControlAV na app sa iPhone.

One question bro, if DTS format yung movie na i-play ko, hindi ba makita na DTS yung nasa display ng receiver? Wala rin akong ma-set sa modes na dts. Puro Dolby lahat, neo6, neural sound, etc..

you can just set it to direct. the avr will display the sound format it's receiving and mas pure pa young sound without any processing

[rhodem24]

you can just set it to direct. the avr will display the sound format it's receiving and mas pure pa young sound without any processing

Hi sir, I tried setting it to "Direct". But "Stereo" lang yung ma decode nya (Stereo ang dislay sa Receiver)... I checked on my source (MKV file), it is in DTS 5.1 Format.

Here's my setup by the way, WD Hard drive to Samsung BD-D5100 to Pioneer VSX-1021-K to TV. I'm sure that my player supports the DTS and Dolby encoding.

And also yung Program format indicators (speaker indicators).

[ L ] and [ R ] lang yung mag light up, pero meron akong center speaker. They all produce sound pero bothered ako kung bakit walang [ C ].

Thanks po mga sir.

[warmaster]

Hi sir, I tried setting it to "Direct". But "Stereo" lang yung ma decode nya (Stereo ang dislay sa Receiver)... I checked on my source (MKV file), it is in DTS 5.1 Format.

Here's my setup by the way, WD Hard drive to Samsung BD-D5100 to Pioneer VSX-1021-K to TV. I'm sure that my player supports the DTS and Dolby encoding.

And also yung Program format indicators (speaker indicators).

[ L ] and [ R ] lang yung mag light up, pero meron akong center speaker. They all produce sound pero bothered ako kung bakit walang [ C ].

Thanks po mga sir.

may mga files na merong more than one audio track. may stereo, may dd 5.1, may foreign language etc. check for other audio tracks or language. minsan may mga nadodownload na kahit nakalagay na DTS 5.1 ang actual na sound sa file ay stereo lang. meron kasing DTS and Dolby na 2 channel lang

[raider125jeigh]

Hi sir, I tried setting it to "Direct". But "Stereo" lang yung ma decode nya (Stereo ang dislay sa Receiver)... I checked on my source (MKV file), it is in DTS 5.1 Format.

Here's my setup by the way, WD Hard drive to Samsung BD-D5100 to Pioneer VSX-1021-K to TV. I'm sure that my player supports the DTS and Dolby encoding.

And also yung Program format indicators (speaker indicators).

[ L ] and [ R ] lang yung mag light up, pero meron akong center speaker. They all produce sound pero bothered ako kung bakit walang [ C ].

Thanks po mga sir.

nakaset ba sa raw ung audio ng BD mo?

[rhodem24]

nakaset ba sa raw ung audio ng BD mo?

Yes bro, I think... I still have to re-check when I get home.. You have an idea bakit walang [ C ] yung indicator ng receiver?

may mga files na merong more than one audio track. may stereo, may dd 5.1, may foreign language etc. check for other audio tracks or language. minsan may mga nadodownload na kahit nakalagay na DTS 5.1 ang actual na sound sa file ay stereo lang. meron kasing DTS and Dolby na 2 channel lang

6 audio channels po yung nasa file properties ng mkv files when I checked sa pc..
Na try ko rin i-play sa HTPC ng friend ko, 5.1 surround naman..

[warmaster]

6 audio channels po yung nasa file properties ng mkv files when I checked sa pc..
Na try ko rin i-play sa HTPC ng friend ko, 5.1 surround naman..

yun you just have to select multi channel when playing the file through your bd player

[warmaster]

pwede kasing ganito yan. example:

audio 1 - Dolby Digital 2 channel
audio 2 - Dolby Digital 5.1
audio 3 - DTS 5.1
audio 4 - Dolby Digital Japanese

so you have to cycle through the audio tracks through your BD player and choose whichever you like. by default usually ang i play kasi yung audio track 1

[rhodem24]

pwede kasing ganito yan. example:

audio 1 - Dolby Digital 2 channel
audio 2 - Dolby Digital 5.1
audio 3 - DTS 5.1
audio 4 - Dolby Digital Japanese

so you have to cycle through the audio tracks through your BD player and choose whichever you like. by default usually ang i play kasi yung audio track 1

1 lang yung audio track ng mga mkv files ko.. Mostly Dolby Digital 5.1 or DTS 5.1...

yun you just have to select multi channel when playing the file through your bd player

Sa listening mode po ba eto ng receiver?

[warmaster]

1 lang yung audio track ng mga mkv files ko.. Mostly Dolby Digital 5.1 or DTS 5.1...

Sa listening mode po ba eto ng receiver?

so the avr is set to direct, bd player is set to raw and when you play the file walang indication sa avr na it's getting dolby/dts? i think may small symbols sa avr to indicate DTS and DD. may naririnig ka ba sa center channel? have you tried other mkv files?

[rhodem24]

so the avr is set to direct, bd player is set to raw and when you play the file walang indication sa avr na it's getting dolby/dts? i think may small symbols sa avr to indicate DTS and DD. may naririnig ka ba sa center channel? have you tried other mkv files?

Yes po, avr set to direct pero i'm not sure sa bd player ko if raw ba... Check ko later..

STEREO lang yung naka display eh.. Tapos left and right speakers lang yung may sound. Pero if i-set ko to Dolby Pro Logic II or Neo6, etc, may sound na yung 3 including the center speaker...

[warmaster]

Yes po, avr set to direct pero i'm not sure sa bd player ko if raw ba... Check ko later..

STEREO lang yung naka display eh.. Tapos left and right speakers lang yung may sound. Pero if i-set ko to Dolby Pro Logic II or Neo6, etc, may sound na yung 3 including the center speaker...

pro logic and neo6 are just simulated surrounds. kahit stereo yung file kaya niya magmukhang naka 5.1. kasi pag naka direct ka sa avr, yun lang ang lalabas direct ang stereo mag a appear lang pag stereo yung naka set sa avr. 

[rhodem24]

pro logic and neo6 are just simulated surrounds. kahit stereo yung file kaya niya magmukhang naka 5.1. kasi pag naka direct ka sa avr, yun lang ang lalabas direct ang stereo mag a appear lang pag stereo yung naka set sa avr. 

Yun po yong di ko na intindihan, kung bakit stereo lang yung ma detect nya if DIRECT yung setting ko, kahit dts or dolby 5.1 yung source ko..

[rhodem24]

nakaset ba sa raw ung audio ng BD mo?

I solved my problem na mga boss! Naka set lang pala sa PCM yung Bluray player ko. I changed it to audiophile something (I've read the description, it says for HDMI v1.3 that supports Dolby True HD and DTS Master Audio)

Thanks mga sir!

[raider125jeigh]

I solved my problem na mga boss! Naka set lang pala sa PCM yung Bluray player ko. I changed it to audiophile something (I've read the description, it says for HDMI v1.3 that supports Dolby True HD and DTS Master Audio)

Thanks mga sir!

dun lang talaga kasi ung issue nyan setting ng BD mo....

good....

[eymard_124]

noob inquiry po mga masters... may problema ba kung sakaling kabitan ko ng magic sing ito?

material: pioneer 521 + logitech Z5500

salamat po sa assitance.

[rhodem24]

noob inquiry po mga masters... may problema ba kung sakaling kabitan ko ng magic sing ito?

material: pioneer 521 + logitech Z5500

salamat po sa assitance.

I dunno if tama po ako, but I think pwede. Optical/Coaxial IN sa receiver, OUT sa speaker..

[Nelson de Leon]

noob inquiry po mga masters... may problema ba kung sakaling kabitan ko ng magic sing ito?

material: pioneer 521 + logitech Z5500

salamat po sa assitance.

Use the analog input of your receiver.

I dunno if tama po ako, but I think pwede. Optical/Coaxial IN sa receiver, OUT sa speaker..

Kung may digital output ang Magic sing. Hopefully sana meron na...? Or baka hindi din ako updatred and may lumabas ng sing a long na may digital output na?

[rochie]

Im currently using VSX-521K as my receiver and Im planning to upgrade, ok ba na may upgrade ako to 821K or 1021K or higher na model na? wala ba gaanong significance pagdating sa audio/video quality ang 521 vs 821? thanks

[joko11]

Im currently using VSX-521K as my receiver and Im planning to upgrade, ok ba na may upgrade ako to 821K or 1021K or higher na model na? wala ba gaanong significance pagdating sa audio/video quality ang 521 vs 821? thanks

go for 1021 but if i were you aim for elite reciever.

[markcrenz]

Im currently using VSX-521K as my receiver and Im planning to upgrade, ok ba na may upgrade ako to 821K or 1021K or higher na model na? wala ba gaanong significance pagdating sa audio/video quality ang 521 vs 821? thanks

nothing significant. usually 10xx and higher models have better amplification and video processing. kahit elite series, the 2 models at the bottom do not employ the same amps as the higher models.

[rochie]

nothing significant. usually 10xx and higher models have better amplification and video processing. kahit elite series, the 2 models at the bottom do not employ the same amps as the higher models.

thanks ng madami, so kailangan ko ng matinding pangungupit sa pera ko nito hahahahahahahaha.

[eymard_124]

Use the analog input of your receiver.

Kung may digital output ang Magic sing. Hopefully sana meron na...? Or baka hindi din ako updatred and may lumabas ng sing a long na may digital output na?

Salamat po sa input! yung sales kasi sa pioneer di daw adivsable gamitan ng magic sing and the likes kasi daw yung feedback na na-create nakakasira ng speakers. sakto naman wala pa ako nababasang gumamit ng magic sing so naisip ko baka nga nakakasira.

anyhow, salamat po ulit... wala naman pala problema.

regards,
eymard