Author Topic: Pioneer Receivers (Read 283106 times)

DTNS · « **Reply #1680 on:** Dec 22, 2013 at 05:29 PM »

Quote from: zram18 on Dec 22, 2013 at 01:36 PM

baka yung pioneer todoroki set yan sir, yung madalas makita sa mga appliance store. personally, naaudition ko na mga yun, pero di ko nagustuhan sound. pati subwoofer, di maganda..something is lacking sa characteristics ng sound, lacks the punch. pioneer, magaling sa receivers, pero sa speakers esp subwoofers, i believe not their main forte. talo cla ng other brands.

I second the motion! I heard a pioneer todoroki subwoofer before. boomy cya! $:-\$ mas clean pa bass ng Crown subwoofer.

ashelyacts · « **Reply #1681 on:** Dec 24, 2013 at 01:15 AM »

Yep todoroki and the av receiver is vsx 323? Is that receiver good? How bout i get only the receiver the. Get a different brand speakers and woofers?

DTNS · « **Reply #1682 on:** Dec 24, 2013 at 05:56 PM »

Quote from: ashelyacts on Dec 24, 2013 at 01:15 AM

Yep todoroki and the av receiver is vsx 323? Is that receiver good? How bout i get only the receiver the. Get a different brand speakers and woofers?

if the specs and features of the 323 are enough for you, then get it. but I would recommend a different brand of speakers and sub.

amrod_palantir · « **Reply #1683 on:** Jan 09, 2014 at 01:08 PM »

pioneer avr + onkyo htib speakers set . any feedback on this combo?
i have a set (not being used) which i could pair with a possible 521 or 821 reciever kasi.

Nelson de Leon · « **Reply #1684 on:** Jan 09, 2014 at 01:27 PM »

Quote from: amrod_palantir on Jan 09, 2014 at 01:08 PM

pioneer avr + onkyo htib speakers set . any feedback on this combo?
i have a set (not being used) which i could pair with a possible 521 or 821 reciever kasi.

Are you referring to the big/full size htib (those standard BS type speakers) by onkyo? If yes, get the more powerful model.

amrod_palantir · « **Reply #1685 on:** Jan 09, 2014 at 03:17 PM »

sorry i forgot to mention that the speakers set comes from the onkyo HT-s3400 HTIB.
smaller sized 6ohm speakers sya. just dont now if this pio + onkyo combo will be bright or warm sounding.

jon2 · « **Reply #1686 on:** Feb 11, 2014 at 08:51 PM »

lumabas na ba slim line receiver ng pio?

emerdeguia68 · « **Reply #1687 on:** Mar 11, 2014 at 04:23 PM »

patulong naman..mine is pioneer vsx 520k, binili ko ito almost 2years ago brand new at abenson..yung power

minsan pag bubuksan mo mahirap ma turn on..pipindutin mo pa ng ilang beses bago mag on..kailangan na ba

dalin sa service center or pwede pa linisin lang?

markcrenz · « **Reply #1688 on:** Mar 11, 2014 at 06:32 PM »

Could be a defect in the standby circuit. Most probably the drive or the relay that supplies the power to the main power transformer. Nakapagrepair na ako ng ganyang defect, tutong na pala yung relay contacts kaya minsan may contact minsan wala.

emerdeguia68 · « **Reply #1689 on:** Mar 11, 2014 at 08:58 PM »

Quote from: markcrenz on Mar 11, 2014 at 06:32 PM

Could be a defect in the standby circuit. Most probably the drive or the relay that supplies the power to the main power transformer. Nakapagrepair na ako ng ganyang defect, tutong na pala yung relay contacts kaya minsan may contact minsan wala.

bro medyo mahal ba pag pinagawa ko? thank you sa reply!

Nelson de Leon · « **Reply #1690 on:** Mar 12, 2014 at 12:24 AM »

Quote from: emerdeguia68 on Mar 11, 2014 at 08:58 PM

bro medyo mahal ba pag pinagawa ko? thank you sa reply!

Best you bring your unit to his place para ma-actual ang estimate. Taga QC siya.

jnazareta · « **Reply #1691 on:** Mar 12, 2014 at 12:47 AM »

Quote from: emerdeguia68 on Mar 11, 2014 at 04:23 PM

patulong naman..mine is pioneer vsx 520k, binili ko ito almost 2years ago brand new at abenson..yung power

minsan pag bubuksan mo mahirap ma turn on..pipindutin mo pa ng ilang beses bago mag on..kailangan na ba

dalin sa service center or pwede pa linisin lang?

Bro I have the same dillema before with my 520K. di ba agad nag reresponse pag ung sa power button on the unit itself ang ginagamit mo but works fine pag power on using the remote? I believe you are using a voltage regulator. Test it out by plugging in the unit directly to the wall outlet and see if your reciever will power on immediately using the button on the unit. If it works fine then have the voltage output of your voltage regularoty check and calibrated. markcrenz is also right it might be the standby circuit that is causing the issue. Give us a feedback bro..

emerdeguia68 · « **Reply #1692 on:** Mar 17, 2014 at 12:59 AM »

yes

Quote from: jnazareta on Mar 12, 2014 at 12:47 AM

Bro I have the same dillema before with my 520K. di ba agad nag reresponse pag ung sa power button on the unit itself ang ginagamit mo but works fine pag power on using the remote? I believe you are using a voltage regulator. Test it out by plugging in the unit directly to the wall outlet and see if your reciever will power on immediately using the button on the unit. If it works fine then have the voltage output of your voltage regularoty check and calibrated. markcrenz is also right it might be the standby circuit that is causing the issue. Give us a feedback bro..

yes pag remote wala naman problema...im not using a voltage regulator..direct connection sa outlet
minsan isang pindot lang on na..pero minsan din ilang pindot pa bago mag on.

Nelson de Leon · « **Reply #1693 on:** Mar 17, 2014 at 01:37 AM »

Sometimes you have to wait for a few seconds after plugging it.

acepogie · « **Reply #1694 on:** Mar 17, 2014 at 10:17 AM »

My Pioneer VSX 1020-K died yesterday. When i'm turning it on hanggang power on lang siya then mamamatay na. The PQLS light is flashing. Saan ko kaya ito pwede ipa repair?

markcrenz · « **Reply #1695 on:** Mar 17, 2014 at 10:29 AM »

^ nag-reset ka na? if you did and still shuts down i can do a quick checkup for free

acepogie · « **Reply #1696 on:** Mar 17, 2014 at 10:56 AM »

Sir hindi ko na makuhang i reset dahil ayaw nya na tumuloy mag on. Mag didisplay lang yung "power on" ng 1 sec. then mamatay ulit. Then nag bblink yung PQLS.

Sir you do home service ba? or san po place nyo para mapa check up ko. thanks.

Nelson de Leon · « **Reply #1697 on:** Mar 17, 2014 at 12:59 PM »

Quote from: acepogie on Mar 17, 2014 at 10:56 AM

Sir hindi ko na makuhang i reset dahil ayaw nya na tumuloy mag on. Mag didisplay lang yung "power on" ng 1 sec. then mamatay ulit. Then nag bblink yung PQLS.

Sir you do home service ba? or san po place nyo para mapa check up ko. thanks.

Have you tried removing all connections? HDMI, speaker wires, coax etc?

acepogie · « **Reply #1698 on:** Mar 17, 2014 at 01:43 PM »

Yes sir na try ko ng i-disconnect lahat ganun pa din. 110v nga pala yung unit.

Nelson de Leon · « **Reply #1699 on:** Mar 17, 2014 at 01:59 PM »

Quote from: acepogie on Mar 17, 2014 at 01:43 PM

Yes sir na try ko ng i-disconnect lahat ganun pa din. 110v nga pala yung unit.

Don King Markcrenz na ang solution diyan.

jnazareta · « **Reply #1700 on:** Mar 24, 2014 at 11:30 PM »

Hi fellow DVD members,

My Pioneer VSX-1022 K died on me today and has no power in it. I brought it to Pioneer service center in Novaliches and was assessed with 1,500 for the labor and 3,000 for the parts replacement. Is this price fair knowing that my reciever loose power while watching a movie. I tried to disconnect all the cables on the back and still no power. BTW my unit is 110V. Your inputs is appreciated po.

qguy · « **Reply #1701 on:** Mar 24, 2014 at 11:33 PM »

Did they mention the parts to be replaced ?

jnazareta · « **Reply #1702 on:** Mar 24, 2014 at 11:54 PM »

Quote from: qguy on Mar 24, 2014 at 11:33 PM

Did they mention the parts to be replaced ?

@Sir qguy,

They haven't told me the damage part. I wasn't expecting this much for a no power issue on a reciever. I had my vsx 420k repaired as well last year for no power issue as well and they just charged me 2.5k for the part and labor. Knowing that I was under the impression that the cost of repairing my 1022k is just the same bracket but unfortunately I was told that the parts and price of labor for my 1022 is higher compared to my old vsx 420. Never the less I already approved the repair, I just want to know if 4.5K is a fair price for a no power issue on a receiver.

markcrenz · « **Reply #1703 on:** Mar 24, 2014 at 11:56 PM »

Quote from: jnazareta on Mar 24, 2014 at 11:30 PM

Hi fellow DVD members,

My Pioneer VSX-1022 K died on me today and has no power in it. I brought it to Pioneer service center in Novaliches and was assessed with 1,500 for the labor and 3,000 for the parts replacement. Is this price fair knowing that my reciever loose power while watching a movie. I tried to disconnect all the cables on the back and still no power. BTW my unit is 110V. Your inputs is appreciated po.

sa kin mo pagawa half lang nyan charge ko.

kangkaroth · « **Reply #1704 on:** Mar 25, 2014 at 12:01 AM »

diba sir jnazareta, 1 yr pa lang yan sa yo and bnew mo sya nakuha?

jnazareta · « **Reply #1705 on:** Mar 25, 2014 at 01:08 AM »

Opo sir 1 year pa lang po ito, Bnew po ito nung nabili ko but this unit was from US(110V) kaya po di honored ang warranty here satin..I called the service center and was told that I have to pay the 20% of the total cost for pulling out kasi naorder na nila yung parts and dadating na daw bukas yun..haist....Sayang yung offer ni sir markcrenz makakatipid sana ako. Next time pag nagloko ito kay sir markcrenz ko na agad dadalhin...I was thinking of selling this pa naman to get an 1120 or 1121 para may pre-out na for future upgrade...

kangkaroth · « **Reply #1706 on:** Mar 25, 2014 at 01:20 AM »

grabe muntik na. kung kinagat ko pala offer mo sir. yari ako, hehehhe

qguy · « **Reply #1707 on:** Mar 25, 2014 at 02:26 AM »

out of curiosity, ask for the damage parts

For that price dapat transformer ang papalitan

Quote from: jnazareta on Mar 24, 2014 at 11:54 PM

@Sir qguy,

They haven't told me the damage part. I wasn't expecting this much for a no power issue on a reciever. I had my vsx 420k repaired as well last year for no power issue as well and they just charged me 2.5k for the part and labor. Knowing that I was under the impression that the cost of repairing my 1022k is just the same bracket but unfortunately I was told that the parts and price of labor for my 1022 is higher compared to my old vsx 420. Never the less I already approved the repair, I just want to know if 4.5K is a fair price for a no power issue on a receiver.

jnazareta · « **Reply #1708 on:** Mar 25, 2014 at 02:30 AM »

Quote from: kangkaroth on Mar 25, 2014 at 01:20 AM

grabe muntik na. kung kinagat ko pala offer mo sir. yari ako, hehehhe

Not really sir, Baka natapat lang..baka nagtampo yung 1022 ko kasi naramdaman nya na trade ko sya or benta ko sya...now I'll keep it na lang po after the repair and get an onkyo or yamaha to pair with my wharf po..

jnazareta · « **Reply #1709 on:** Mar 25, 2014 at 02:32 AM »

Quote from: qguy on Mar 25, 2014 at 02:26 AM

out of curiosity, ask for the damage parts For that price dapat transformer ang papalitan

Definitely sir, I will ask on what part did they replace. As for my previous experience po with my VSX 420k, It only cost me 2.5K for the repair having the same no power issue. when I got the receiver they hand over a small plastic with Ic's in it. Probably it will be the same but still Im opting why it cost 4.5K for a no power issue unless then replace a board or something..