Topic: Marantz Remote where to buy?

[jpadua]

I have a Marantz SR4300, but my remote is busted.. does anyone know where to get a replacement?

Thanks in advance.

Jay

[av_phile1]

Have you tried asking the store where you got the unit?  Is this a local purchase? 

[Philander]

anong sira ng remote? kung bigla na lang nag mmalfunction, remove the battery for at least 6 hours then reinsert and try again.

[jpadua]

anong sira ng remote? kung bigla na lang nag mmalfunction, remove the battery for at least 6 hours then reinsert and try again.

Closed na yung place where I bought the amp eh.  Its malfuctioning.  When I press the buttons iba iba nangyayari, its like the remote is sending out different or random IR codes... when I press volume down for example it will switch from DVD to CD input... mali yung functions and not all buttons respond...

[obey]

Di kaya cleaning lang ang kailangan niyan?  Try mo na lang muna ipalinis.

[jpadua]

Di kaya cleaning lang ang kailangan niyan?  Try mo na lang muna ipalinis.

Cleaning? ano yung lilinisin? yung inside ng remote? Tried removing the batteries for more than 6hrs and putting them back, same result.  80% of the buttons have no response and the ones that do mali yung command...

[kt]

bro di kaya parang nareprogram for a different model? try mo reprogram ulit

[jpadua]

bro di kaya parang nareprogram for a different model? try mo reprogram ulit

Its the standard remote that comes with the marantz SR3400, how do I reprogram it?

[izukiultra]

Calling the attention of Electronic Depot!
Where can I buy replacement of my remote controller for MArantz SR6300 AV receiver its a Learning one? Its totally damaged, accidentally drop from 2nd to grnd flr.

Should I buy for Marantz Universal /learning remote where can i avail one?

[obey]

Cleaning? ano yung lilinisin? yung inside ng remote? Tried removing the batteries for more than 6hrs and putting them back, same result.  80% of the buttons have no response and the ones that do mali yung command...

May PCB (Printed Circuit Board)   kasi ang remote.  Sa pagkakaalam ko dito nga may contact ang buttons (yung pinaka keypad) ng remote. Kapag nag accumulate ang dumi sa loob or nagkaroon ng konting corrosion sa PCB magloloko talaga ang remote.  Either hindi siya magrerespond sa specific button na pinipindot mo or kaya gaya ng sabi mo mali ang command.  Di ko pa actually na-try ang cleaning sa remote ng AVR ko pero sa TV remote oks naman.  Ginagamitan ko ng lighter fluid and cotton buds ang paglinis ng PCB.  Nasa sa iyo na lang iyon kung gusto mong ikaw ang maglinis or ipalinis mo na lang sa suking electrician mo.   HTH.

[dana]

Hi ,

Try first to refer to your manual to possibly fix the remocon..
There might be a reset mode instructions with regards to your remocon.It might be a series of pressing simultaneously some buttons to reset to factory mode or there might be a hidden small button that can be pressed by a small tip somewhere in the remote to reset......