Author Topic: ONKYO AVR (Read 537692 times)

jericm · « **Reply #2220 on:** Jul 14, 2011 at 10:14 PM »

Quote from: Onkyo606 on Jul 14, 2011 at 07:36 PM

talk about a back breaker

i was very excited to finally complete setting up my system in the new house, took me three days to do so, finally got to do some test wihtout running audyssey yet, was very happy with the result, now why the back breaker?

when i turned on my receiver, an ONKYO HT RC180 yesterday morning, it acted up, first time it happenes ina year and a half, it wont turn on and the red light indicating stand by mode just kept blinking, remove the plug then plugged again but same result, then i pushed the power button once then the display panel got activated but quickly died dwon again then i pressed hard again, finally it got activated and I was able to finsih one movie without issues. Then i tried it again this morning, same thing happened.

What could be the issue? Am I seeing the end of my precious receiver? I hope not.

Maybe the power button is just acting up sir. I have a Jurassic Onkyo Tx Sr600 that's been with me for 12 years na and still no problem encountered. Built to last at a ang Onkyo ah.

Still it sucks when something like that happens

Courage · « **Reply #2221 on:** Jul 14, 2011 at 10:18 PM »

Quote from: Onkyo606 on Jul 14, 2011 at 08:09 PM

yes sir got to use it for a xouple of times and without issues but acted up starting yesterday.

I would revisit again the connections later and see if i miss any

thanks

Bro,

Try turning it on nang walang naka connect. Remove all cable connections(Speakers, HDMI, RCA's, Optic, Coax etc..). This is just to isolate the problem.. Pag nangyari pa rin then it's your receiver.. Pag hindi nangyari then isa sa mga cables ang defective..

stickfighter · « **Reply #2222 on:** Jul 14, 2011 at 11:48 PM »

Quote from: Courage on Jul 14, 2011 at 10:18 PM

Bro,

Try turning it on nang walang naka connect. Remove all cable connections(Speakers, HDMI, RCA's, Optic, Coax etc..). This is just to isolate the problem.. Pag nangyari pa rin then it's your receiver.. Pag hindi nangyari then isa sa mga cables ang defective..

Yup, same suggestion here. Tirso actually text me about this issue earlier today and I suggested the same thing. Disconnect all connections. Just plug the receiver and switch it "on" to see if the delemma still occurs. Process of elimination lang para malaman kung ano talaga ang may problema.

wengkapre · « **Reply #2223 on:** Jul 15, 2011 at 04:15 PM »

Quote from: Onkyo606 on Jul 14, 2011 at 07:36 PM

talk about a back breaker

i was very excited to finally complete setting up my system in the new house, took me three days to do so, finally got to do some test wihtout running audyssey yet, was very happy with the result, now why the back breaker?

when i turned on my receiver, an ONKYO HT RC180 yesterday morning, it acted up, first time it happenes ina year and a half, it wont turn on and the red light indicating stand by mode just kept blinking, remove the plug then plugged again but same result, then i pushed the power button once then the display panel got activated but quickly died dwon again then i pressed hard again, finally it got activated and I was able to finsih one movie without issues. Then i tried it again this morning, same thing happened.

What could be the issue? Am I seeing the end of my precious receiver? I hope not.

naku kaya pala, balitaan mo kami kung anong nangyari Sir at anong solution...gudlak po sana maayos na 180 nyo

Onkyo606 · « **Reply #2224 on:** Jul 15, 2011 at 07:31 PM »

Quote from: Courage on Jul 14, 2011 at 10:18 PM

Bro,

Try turning it on nang walang naka connect. Remove all cable connections(Speakers, HDMI, RCA's, Optic, Coax etc..). This is just to isolate the problem.. Pag nangyari pa rin then it's your receiver.. Pag hindi nangyari then isa sa mga cables ang defective..

i did this, same thing happened, when you turn it on the red light blinks, after about two minutes, it turns on and works flawlessly even at cranked up volume. it pains me as i have never heard my set up sound this good and only after setting it up in our new house. i hope im not seeing the end of my receiver as this one served me well for 1.5 years already

thanks brader courage.

Onkyo606 · « **Reply #2225 on:** Jul 15, 2011 at 07:32 PM »

Quote from: jericm on Jul 14, 2011 at 10:14 PM

Maybe the power button is just acting up sir. I have a Jurassic Onkyo Tx Sr600 that's been with me for 12 years na and still no problem encountered. Built to last at a ang Onkyo ah. Still it sucks when something like that happens

kung ito lang isyu mukhang madaling ayusin.

streetsmart · « **Reply #2226 on:** Jul 15, 2011 at 08:45 PM »

Tirso, there should be a way to reset the receiver. Meron pa nga soft and hard reset. Try mo muna yun.

Courage · « **Reply #2227 on:** Jul 15, 2011 at 08:49 PM »

Quote from: Onkyo606 on Jul 15, 2011 at 07:32 PM

kung ito lang isyu mukhang madaling ayusin.

Sana yan nga lang problema brader or else hassle yan...

puffalan84 · « **Reply #2228 on:** Jul 15, 2011 at 10:51 PM »

try to check also you AVR sir, the other AVR.. nangyari sakin to once,, found out that my AUto volt regulator was the culprit.. baka ila ng days mo sya di nagamit,, hope it helps..

Courage · « **Reply #2229 on:** Jul 15, 2011 at 10:56 PM »

Quote from: puffalan84 on Jul 15, 2011 at 10:51 PM

try to check also you AVR sir, the other AVR.. nangyari sakin to once,, found out that my AUto volt regulator was the culprit.. baka ila ng days mo sya di nagamit,, hope it helps..

+1 I remember when i was not using an AVR for my Receiver, my Receiver keeps on shutting down.

nogie · « **Reply #2230 on:** Jul 16, 2011 at 08:46 AM »

When I play a Dolby Digital Plus movie bit-streamed from NMT, I hear 3-4 "hard clicks" before my Onkyo can able to play the incoming codec. Is this normal? Files that I have are HD-DVD rips.

puffalan84 · « **Reply #2231 on:** Jul 16, 2011 at 09:28 AM »

Quote from: nogie on Jul 16, 2011 at 08:46 AM

When I play a Dolby Digital Plus movie bit-streamed from NMT, I hear 3-4 "hard clicks" before my Onkyo can able to play the incoming codec. Is this normal? Files that I have are HD-DVD rips.

I hope its normal coz it also happens with my Onkyo sir..

pa3ck608 · « **Reply #2232 on:** Jul 16, 2011 at 09:50 AM »

Quote from: nogie on Jul 16, 2011 at 08:46 AM

When I play a Dolby Digital Plus movie bit-streamed from NMT, I hear 3-4 "hard clicks" before my Onkyo can able to play the incoming codec. Is this normal? Files that I have are HD-DVD rips.

same with mine.

Conan · « **Reply #2233 on:** Jul 16, 2011 at 11:44 AM »

Quote from: pa3ck608 on Jul 16, 2011 at 09:50 AM

same with mine.

Pat do you experience hearing a click (maybe once in a movie) around midway through a movie?

nogie · « **Reply #2234 on:** Jul 16, 2011 at 12:14 PM »

Quote from: pa3ck608 on Jul 16, 2011 at 09:50 AM

same with mine.

Quote from: puffalan84 on Jul 16, 2011 at 09:28 AM

I hope its normal coz it also happens with my Onkyo sir..

Thanks guys! At least hindi ako kakabahan na masira avr ko. Wala kasing "click" pag DTS-HD ang play ko eh.

pa3ck608 · « **Reply #2235 on:** Jul 16, 2011 at 12:28 PM »

Quote from: Conan on Jul 16, 2011 at 11:44 AM

Pat do you experience hearing a click (maybe once in a movie) around midway through a movie?

never pa naman sir.

Conan · « **Reply #2236 on:** Jul 16, 2011 at 12:34 PM »

Quote from: pa3ck608 on Jul 16, 2011 at 12:28 PM

never pa naman sir.

Talaga? I normally hear it when watching with my Mede8er. Will try with a Bluray.

pa3ck608 · « **Reply #2237 on:** Jul 16, 2011 at 01:54 PM »

Quote from: Conan on Jul 16, 2011 at 12:34 PM

Talaga? I normally hear it when watching with my Mede8er. Will try with a Bluray.

yes sir. it never occurred to my avr. nmt din gamit ko. maybe sa movie file mo yan sir.

my listening mode preset in mono/2ch sources are set to stereo, while the multi channel sources are set to straight decode. so naka stereo pag ka on. when i play a movie in multichannel audio, the clicking sound happens at the very start because dinedecode siguro ng avr yung multi channel codec. everytime i stop or pause the movie playback, it shifts back to stereo, then when i resume play nagckiclick ulit before magappear yung dts/dolby sa avr ...something like that.

Onkyo606 · « **Reply #2238 on:** Jul 17, 2011 at 02:37 PM »

maraming salamat po sa lahat ng nag post about the issue ng receiver ko.

yesterday everything worked well already,according to a good friend must be the back up battery na na discharged kaya matagal sya mag on after the blinking.

i hope tuloy tuloy na wala ng pang bili ng bago eh

maraming salamat pong muli sa lahat ng nag bigay ng insights at payo sa mga dapat kung gawin.

Onkyo606 · « **Reply #2239 on:** Jul 17, 2011 at 02:40 PM »

Quote from: nogie on Jul 16, 2011 at 08:46 AM

When I play a Dolby Digital Plus movie bit-streamed from NMT, I hear 3-4 "hard clicks" before my Onkyo can able to play the incoming codec. Is this normal? Files that I have are HD-DVD rips.

this is somthing that happens to an onkyo

FW upgrade would eliminate this meron din akong ganito but i can live with it takot ako mga upgrade ng FW eh.

stickfighter · « **Reply #2240 on:** Jul 18, 2011 at 05:51 AM »

Quote from: Onkyo606 on Jul 17, 2011 at 02:37 PM

maraming salamat po sa lahat ng nag post about the issue ng receiver ko.

yesterday everything worked well already,according to a good friend must be the back up battery na na discharged kaya matagal sya mag on after the blinking.

i hope tuloy tuloy na wala ng pang bili ng bago eh

maraming salamat pong muli sa lahat ng nag bigay ng insights at payo sa mga dapat kung gawin.

Good for you brader. I am happy you that your receiver is back to normal. Di biro magpalit ng receiver eh.

ninjababez® · « **Reply #2241 on:** Jul 18, 2011 at 06:08 AM »

Quote from: stickfighter on Jul 18, 2011 at 05:51 AM

Good for you brader. I am happy you that your receiver is back to normal. Di biro magpalit ng receiver eh.

i agree bro, plus the agony of looking for the best receiver for a certain budget.

Blu-devil · « **Reply #2242 on:** Jul 18, 2011 at 12:53 PM »

Quote from: Onkyo606 on Jul 15, 2011 at 07:32 PM

kung ito lang isyu mukhang madaling ayusin.

I'm also having an issue with my HT-RC180: It wont play movies in 9.1. It used to , when I had mainly Sony BS, but now I have mainly FS it wont play 9.1. I was on the phone to Onkyo in New Jersey for over an hour. The CS rep thinks either something has gone kaput inside of the receiver may not be powerful enough to handle 4 FS, 4 BS 1 Cen and 1 SUB. What do you think?

Yunarce · « **Reply #2243 on:** Jul 19, 2011 at 04:49 PM »

Hi mga boss!! Im new into the auidio stuff and i just want to ask if compatible ba ung speaker ng Sony DAV-DZ270K (http://www.sony.com.ph/product/dav-dz270k?tabName=specifications) sa Onkyo 609/709? Im planning to buy either of those receivers and i'll just use the sony speakers kase mag iipon muna ulit ako for new set of speakers.

Thanks!

avshop · « **Reply #2244 on:** Jul 25, 2011 at 11:02 PM »

Quote from: Yunarce on Jul 19, 2011 at 04:49 PM

Hi mga boss!! Im new into the auidio stuff and i just want to ask if compatible ba ung speaker ng Sony DAV-DZ270K (http://www.sony.com.ph/product/dav-dz270k?tabName=specifications) sa Onkyo 609/709? Im planning to buy either of those receivers and i'll just use the sony speakers kase mag iipon muna ulit ako for new set of speakers.

Thanks!

It should work based on specs but those specs maybe over rated.

Come by the shop to check out the 609 with speakers from B&w, Polk audio, infinity, Klipsch, Jbl.

bono vox · « **Reply #2245 on:** Jul 26, 2011 at 09:02 AM »

hi Mark, sana kuha ka na rin ng dynaudio.

Yunarce · « **Reply #2246 on:** Jul 27, 2011 at 02:06 PM »

Quote from: avshop on Jul 25, 2011 at 11:02 PM

It should work based on specs but those specs maybe over rated.

Come by the shop to check out the 609 with speakers from B&w, Polk audio, infinity, Klipsch, Jbl.

uu boss malapit na.

Ang ouput ng 609 is 6ohms dba? So dapat mas malaki ung ohms ng speakers or else mahihirapan ung 609 "i-drive" ung speakers. Yung Sony DAV-DZ270k kse 3ohms rated lahat ng speaker nila pati subs (http://www.sonystyle.com.hk/ss/product/av/dav_dz270k_e.jsp). Tama po ba understanding ko?

avshop · « **Reply #2247 on:** Jul 27, 2011 at 08:08 PM »

Quote from: bono vox on Jul 26, 2011 at 09:02 AM

hi Mark, sana kuha ka na rin ng dynaudio.

Hard to have to many brands unless maganda support Ng distributor. Afaik, Lis lang Ang may dyn. B&w na Lang tayo. Especially the 800 series diamond.

plapoy · « **Reply #2248 on:** Aug 08, 2011 at 01:54 AM »

Mga sir question lang po..

Normal lang po ba na nagiinnit pa rin ang onkyo receiver natin kahit naka passtru lang sya (connected hdmi cable to the plasma)?. napansin ko po kasi mejo mainit pa rin yung receiver kahit naka passtru lang yung light inidicator kahit po kasi nood lang ako ng tv.. is there any way to turn it off?. Thanks in advance mga master.

Conan · « **Reply #2249 on:** Aug 08, 2011 at 07:24 AM »

Quote from: plapoy on Aug 08, 2011 at 01:54 AM

Mga sir question lang po..

Normal lang po ba na nagiinnit pa rin ang onkyo receiver natin kahit naka passtru lang sya (connected hdmi cable to the plasma)?. napansin ko po kasi mejo mainit pa rin yung receiver kahit naka passtru lang yung light inidicator kahit po kasi nood lang ako ng tv.. is there any way to turn it off?. Thanks in advance mga master.

Yes that's normal. The only way to avoid the heat is to not use pass-through.