Topic: ONKYO AVR

[questforthegoodlife]

oo bro tinudo ko na volume wala talaga..supported ba ng 609 ang acc codec?

how about the audio ps3 setting? baka the audio is still through analog. try hdmi

[oalsecnew_0720]

how about the audio ps3 setting? baka the audio is still through analog. try hdmi

nakaset din sa optical yung ps3..kapag ibang movie ang iplay ko may audio..yung lahat ng acc audio codec walang audio sa avr ko..

[Tempter]

oo bro tinudo ko na volume wala talaga..supported ba ng 609 ang acc codec?

Dapat, kasi yung previous models nila eh oo.

Try mo kaya sa ibang media player using the same file. Kung wala ka, try mo manghiram...

[oalsecnew_0720]

cge try ko sa ibang video source kapag may mahiraman ako..

[oalsecnew_0720]

Dapat, kasi yung previous models nila eh oo.

Try mo kaya sa ibang media player using the same file. Kung wala ka, try mo manghiram...

pero kapag sa tv lang ilalabas yung audio meron naman..kapag sa avr na wala ng audio..

[otep_32]

tanong lang po sa mga masters ng pdvd.kapag nagplay po ako ng movie sa ps3 na nakakabit sa onkyo 609 ko wala pong audio na lumalabas sa avr..ito po file ng movie: video codec avc 3.1 mbps audio codec aac 259 kbps..kapag yung audio pinalabas ko sa tv meron naman,kapag nilagay ko na sa avr thru optical walang sound..ano po kayang problem? salamat po sa mga sasagot..

Sir,try mo HDMI connection.from your ps3 HDMI out connect to the hdmi input of 609.curious lng ako bka hindi nka assign ng tama ang optical input ng 609 mo.

[oalsecnew_0720]

Sir,try mo HDMI connection.from your ps3 HDMI out connect to the hdmi input of 609.curious lng ako bka hindi nka assign ng tama ang optical input ng 609 mo.

cge try ko hdmi..pero kapag ibang movie may sound sa optical input..

[oalsecnew_0720]

Sir,try mo HDMI connection.from your ps3 HDMI out connect to the hdmi input of 609.curious lng ako bka hindi nka assign ng tama ang optical input ng 609 mo.

bro otep_32 tama ka.. salamat sa advice..may sound na thru hdmi...salamat po sa lahat ng nagreply sa tanong ko..the best pdvd..

[Weng!]

I get resolution error message on my Onkyo 1008 whenever I set the media player (PCH) to a PAL setting that is not supported by my TV - which implies that the Onkyo is correctly passing through the signal that is sent out from the source, but my TV can't display it.   

My suggestions:

1.  Try to upgrade the FW of your Onkyo to the latest one.  I did this the 1st time I powered my 1008, and there was in fact an update available (as of May 2011)

2.  Have you tried setting all sources and the Onkyo to 1080p?   I noted that your Plasma is 720p but it should be compatible with 1080p input via HDMI, unless it's a very very very old model. 

3.  All your sources (NMT, DVD, etc.) are also set to 720p right now?  I think I've seen transient resolution error when I switch from a 720p source to a 1080p source.  Transient because the error is gone once you hear that characteristic TIK TIK sound of the Onkyo as it recognizes a signal from a source.

1. will update now and see if it will fix the error message.
2. i have tried it on 1080p already and my plasma can take 1080p signal. i have not checked the output of my NMT though, will give it a look.
3. NMT & DVD are set to 720p. yes, the error message is transient only and shows up during start up when no signal is sent to the amp. i have not experienced it when changing from 720p to 1080p.

btw, here's the error message on the display.

[Weng!]

updated the firmware and changed the Popcorn output setting to 1080p/60hz (from 1080p/24hz) and NTSC/PAL from (NTSC/PAL 24hz). the resolution error message is gone during start up.

don't know which of the above changes fixed the error, nevertheless the problem was solved

thanks sir clondalkin and to the rest who gave their suggestions

[van_xer]

Hi guys   My 606 didnt come with a mic. Can i borrow drom someone to calibrate my speakers?  I tried using a friends mic from a yamaha. Doesnt seem to work. Nag eeror

Anyone?

[jao143]

Anyone?

The answer is no. As per audyssey website, you should use the same calibration mic that came with the receiver.

[khestoi]

i have a HK avr 160 right now. will there be a big difference if i moded to 709? how much is 709 here?

Thanks!

[Yunarce]

i have a HK avr 160 right now. will there be a big difference if i moded to 709? how much is 709 here?

Thanks!

i think around 50k ung 709.

[avshop]

i have a HK avr 160 right now. will there be a big difference if i moded to 709? how much is 709 here?

Thanks!

We can give you a good deal on the Onkyo 709. Sent you pm.

[hotchefnick]

Good day fellow Onkyo users

got my 608 yesterday....its hooked up with Samsung 32in UA5000 LED Full HD TV...Sony Ps3 for the source....I have questions

1. Is it me or theres a significant loss of resolution or picture quality when I plug the ps3 to the av as compared to the  straight to the monitor?
2. even if the display in the PS3 says its using Dolby True HD/DTS....its just says PCM in the av's display?


next....is there a professional color calibrator that you can hire to fix your tv's resolution? Im not so happy with the preset picture modes of the samsung

thanks!!

BTW the Onkyo sooooooooooounds awesome!!!

[Conan]

Good day fellow Onkyo users

got my 608 yesterday....its hooked up with Samsung 32in UA5000 LED Full HD TV...Sony Ps3 for the source....I have questions

1. Is it me or theres a significant loss of resolution or picture quality when I plug the ps3 to the av as compared to the  straight to the monitor?
2. even if the display in the PS3 says its using Dolby True HD/DTS....its just says PCM in the av's display?


next....is there a professional color calibrator that you can hire to fix your tv's resolution? Im not so happy with the preset picture modes of the samsung

thanks!!

BTW the Onkyo sooooooooooounds awesome!!!

Set audio mode of PS3 to Bitstream.

[Conan]

With regard to picture quality, set the Onkyo to "Through" mode though sometimes the receiver will still try to upscale in spite of this. You can turn off the Onkyo's video processing by pressing the VCR button and then the Return button. Press it until you see the message "V.Processor Skip". The quality should now match hooking up the PS3 directly to the TV. But you will lose the on screen menu by doing this.

[hotchefnick]

No on screem menu? As in no GUI?

[Conan]

No on screem menu? As in no GUI?

The Setup screen will work as usual but the volume and home keys will no longer be displayed on screen.

[♡ lvcdg23™ ✌]

With regard to picture quality, set the Onkyo to "Through" mode though sometimes the receiver will still try to upscale in spite of this. You can turn off the Onkyo's video processing by pressing the VCR button and then the Return button. Press it until you see the message "V.Processor Skip". The quality should now match hooking up the PS3 directly to the TV. But you will lose the on screen menu by doing this.

Sir Conan,
Would this work din kaya with older Onkyo AVRs like the 805?
Pano kaya mag passthrough dito?
Wala kasing option na "Through" sa HDMI seetings nya.

Thanks 

[Conan]

Sir Conan,
Would this work din kaya with older Onkyo AVRs like the 805?
Pano kaya mag passthrough dito?
Wala kasing option na "Through" sa HDMI seetings nya.

Thanks 

Hi Louie I'm not sure about that. What are the options in the HDMI settings?

[♡ lvcdg23™ ✌]

Hi Louie I'm not sure about that. What are the options in the HDMI settings?

Sir Conan,

HDMI Monitor options lang sir wala yung Resolution Through...

[nogie]

Sir Conan,

HDMI Monitor options lang sir wala yung Resolution Through...

For xx5 series ng Onkyo yong 875 at 905 lang ang me option ng Auto,480p-1080p & passthrough sa hdmi settings.

[hotchefnick]

Set audio mode of PS3 to Bitstream.

sir, even in hdmi?

sorry sir...noob pa sa ps3

nick

[Conan]

sir, even in hdmi?

sorry sir...noob pa sa ps3

nick

Yes in HDMI.

[funky_fresh]

Hi Guys,question lang regarding Onkyo 609-

and feedbacks or reviews? or suggestions of other AVR?

planning to setup my own HT in my room, room size is around 20sqm. don't have much idea on setting up. and may mga nabasa ako na to step by step lang..para hindi mabigla sa gastos.

any suggestion on brands and stores?

btw, i have a 42ld460 tv in the room. and also wanting to connect my PC to the reciever for gaming and movies. and also kung kaya wireless music playing using ipad. this possible?

[Yunarce]

Hi Guys,question lang regarding Onkyo 609-

and feedbacks or reviews? or suggestions of other AVR?

planning to setup my own HT in my room, room size is around 20sqm. don't have much idea on setting up. and may mga nabasa ako na to step by step lang..para hindi mabigla sa gastos.

any suggestion on brands and stores?

btw, i have a 42ld460 tv in the room. and also wanting to connect my PC to the reciever for gaming and movies. and also kung kaya wireless music playing using ipad. this possible?

About dun sa wireless i think hindi pwede. You need an avr that supports Airplay which the ONKYO receiver doesn't support. Another avr option is ung Denon 1912. You cannot go wrong with either of them.

[funky_fresh]

hi sir, nasa how much ung denon? and can it support ung wireless?

does Denon 1912 comparable to Onkyo 609 in overall performance?

[Conan]

hi sir, nasa how much ung denon? and can it support ung wireless?

does Denon 1912 comparable to Onkyo 609 in overall performance?

Those two receivers are fairly new so there isn't much feedback yet from end users.