Topic: ONKYO AVR

[Onkyo606]

we should have gotten a 3009 atleast, or its only 5009 that has it?

[suavegabe]

Hi All,

Just got my onkyo 360 last night. initial set-up was a breeze but so far I already encountered one problem:
whenever I turn on my xbox 360 (connected via hdmi), the receiver would show "Check SP wire" and would then shut down in about 10-20secs. I've tried connecting it to other hdmi ports and same thing happens. This doesn't happen with my pch-a210 and ps3 though and they work flawlessly with the receiver. I've yet to check if it's the hdmi cable of the xbox that's causing this since I've only spent a small amount of time last night on it.

any advice on the problem?

TIA!

[jcsantamarina]

Try checking your speaker wire connections sir. When an error like that appears and your avr shuts down, it may mean that your speaker connections are loose or the black and red connectors are in contact with each other.

Hi All,

Just got my onkyo 360 last night. initial set-up was a breeze but so far I already encountered one problem:
whenever I turn on my xbox 360 (connected via hdmi), the receiver would show "Check SP wire" and would then shut down in about 10-20secs. I've tried connecting it to other hdmi ports and same thing happens. This doesn't happen with my pch-a210 and ps3 though and they work flawlessly with the receiver. I've yet to check if it's the hdmi cable of the xbox that's causing this since I've only spent a small amount of time last night on it.

any advice on the problem?

TIA!

Sorry for the super delayed response. Been very busy the past few weeks.
I measured 17.5" from the front of the avr to the rear with the banana plugs (add about a quarter of an inch on the right side for the volume knob). and then 17" from side to side and almost 8" from top to bottom.

That's right, kaya gusto ko malaman yung exact dimension.  Grabe pala ang laki nito....beast talaga!

[suavegabe]

Try checking your speaker wire connections sir. When an error like that appears and your avr shuts down, it may mean that your speaker connections are loose or the black and red connectors are in contact with each other.

speaker wires are fine. again, the weird thing about problem is that the shut down only happens when using the xbox. the receiver is working flawlessly with the ps3 and the pch. i also tried connecting the xbox via optical cable while the hdmi of the xbox is directly connected to the tv and problem is still the same.

[raider125jeigh]

mainit ba talaga onkyo avr lalo na kung passive sub?

[darkn1ght]

speaker wires are fine. again, the weird thing about problem is that the shut down only happens when using the xbox. the receiver is working flawlessly with the ps3 and the pch. i also tried connecting the xbox via optical cable while the hdmi of the xbox is directly connected to the tv and problem is still the same.

Try using a known good HDMI with the XBOX.
Use the one from the PCH or the PS3 and see what happens next.

[raider125jeigh]

speaker wires are fine. again, the weird thing about problem is that the shut down only happens when using the xbox. the receiver is working flawlessly with the ps3 and the pch. i also tried connecting the xbox via optical cable while the hdmi of the xbox is directly connected to the tv and problem is still the same.

ive got the same problem
my onkyo avr shuts down hehehe

un nga lang ung aken after 2-4hours of usage
it happenened yesterday after 3-4hours or watching using measy x6
then a while ago nung matatpos na ung saving private ryan using ps3 slim

i assume it would be on my ventilation kasi asa cabinet sya ng tv rack tapos wala pa kami aircon
will monitor this over the week
nung namatay ung aken kanina hindi ko napansin kung nagblink ung standy indicator lights but after pressing the on buttongit works perfectly again...
i watch limitless nung tanghali hindi naman namatay nung hapon lang sa saving private ryan

hmmmm......
i just change setting lik center 10DB+ and sub 2db+
maiinit din ata kasi passive sub ko please enlighten thanks

[Courage]

ive got the same problem
my onkyo avr shuts down hehehe

un nga lang ung aken after 2-4hours of usage
it happenened yesterday after 3-4hours or watching using measy x6
then a while ago nung matatpos na ung saving private ryan using ps3 slim

i assume it would be on my ventilation kasi asa cabinet sya ng tv rack tapos wala pa kami aircon
will monitor this over the week
nung namatay ung aken kanina hindi ko napansin kung nagblink ung standy indicator lights but after pressing the on buttongit works perfectly again...
i watch limitless nung tanghali hindi naman namatay nung hapon lang sa saving private ryan

hmmmm......
i just change setting lik center 10DB+ and sub 2db+
maiinit din ata kasi passive sub ko please enlighten thanks

What Auto Volt Regulator are you using sir? If it's heat, try getting a small fan and put it on top..

[raider125jeigh]

What Auto Volt Regulator are you using sir? If it's heat, try getting a small fan and put it on top..

220volts kasi kaya di ko na ginamitan ng avr
what avr can you suggest?

napansin ko sa gabi lang sya namatay ng twice

baka naisip ko nagooverload din dami kasi namin gumagamit sa isang metro ng kuryente

ayusin ko muna ung rack kasi asa secong row sya hindi kasi pwede sa itaas hindi kasya need ko ipa wall mount ung tv...

[suavegabe]

Try using a known good HDMI with the XBOX.
Use the one from the PCH or the PS3 and see what happens next.

have already did this and it's still the same. avr shuts down after about 1-2mins. the receiver also shuts down even while the xbox is just turned on and not selected on the receiver! tested this while using the PCH and it was playing a movie, i turned on the xbox, and again about 1-2 mins, the receiver shuts down.

I now have nagging feeling that this might be caused by the 3rd party autovolt powerbrick that i'm using on the xbox for whatever reason that i don't know how to explain why its causing this problem. I'll try to use the original 110v powerbrick of the xbox and see if this problem occurs. My only concern is that I only have one 750w transformer that I'll use for the receiver and the xbox. Kaya naman dapat nung transformer na pareho naka on tapos wala naman ginagawa.

[raider125jeigh]

have already did this and it's still the same. avr shuts down after about 1-2mins. the receiver also shuts down even while the xbox is just turned on and not selected on the receiver! tested this while using the PCH and it was playing a movie, i turned on the xbox, and again about 1-2 mins, the receiver shuts down.

I now have nagging feeling that this might be caused by the 3rd party autovolt powerbrick that i'm using on the xbox for whatever reason that i don't know how to explain why its causing this problem. I'll try to use the original 110v powerbrick of the xbox and see if this problem occurs. My only concern is that I only have one 750w transformer that I'll use for the receiver and the xbox. Kaya naman dapat nung transformer na pareho naka on tapos wala naman ginagawa.

meron din ako nakitang ol about xbox shutting down onkyo receiver
hanapin ko ulit

[suavegabe]

meron din ako nakitang ol about xbox shutting down onkyo receiver
hanapin ko ulit

thanks raider! would really appreciate it!

[Courage]

220volts kasi kaya di ko na ginamitan ng avr
what avr can you suggest?

napansin ko sa gabi lang sya namatay ng twice

baka naisip ko nagooverload din dami kasi namin gumagamit sa isang metro ng kuryente

ayusin ko muna ung rack kasi asa secong row sya hindi kasi pwede sa itaas hindi kasya need ko ipa wall mount ung tv...

Try using an Auto Volt regulator, my Receiver before also shutdown when not connected sa AVR, akala ko Receiver may problema kasi minsan iwanan ko lang naka on pag balik ko patay na.. Then i noticed na nangyayari yun kapag may fluctuation.. Nung nilagyan ko na nang AVR di na nangyari ulit..

Mas malakas ang load nang kuryente sa gabi..

[raider125jeigh]

Try using an Auto Volt regulator, my Receiver before also shutdown when not connected sa AVR, akala ko Receiver may problema kasi minsan iwanan ko lang naka on pag balik ko patay na.. Then i noticed na nangyayari yun kapag may fluctuation.. Nung nilagyan ko na nang AVR di na nangyari ulit..

Mas malakas ang load nang kuryente sa gabi..

avr na nga avr pa hehehe
kidding

nu gamit mo papa?
Ung mura lang sana hehe..

Balak ko na ikabit sa avr mga devices ko

Kanina I’ve watch source code and played music no problem or whatsoever
Umaga kasi hehehe


 

[raider125jeigh]

thanks raider! would really appreciate it!

http://www.avsforum.com/avs-vb/archive/index.php/t-1334332.html

[Courage]

avr na nga avr pa hehehe
kidding

nu gamit mo papa?
Ung mura lang sana hehe..

Balak ko na ikabit sa avr mga devices ko

Kanina I’ve watch source code and played music no problem or whatsoever
Umaga kasi hehehe


 

I'm using an Imarflex AVR.. very nice and very stable.. Check out the members selling AVR's sa market place para may idea ka nang prices..

[raider125jeigh]

I'm using an Imarflex AVR.. very nice and very stable.. Check out the members selling AVR's sa market place para may idea ka nang prices..

huhuhuhu
poor mode ako dyan 5k huhuhuhuhu

[Courage]

huhuhuhu
poor mode ako dyan 5k huhuhuhuhu

There are other alternatives bro..

Yaden, Omni, Hossini etc.. etc...

They should work well

[jcsantamarina]

I use Samwon for my 809 and LG LED TV. 1.5 KVA. Kayang kaya naman. (",)

[raider125jeigh]

I use Samwon for my 809 and LG LED TV. 1.5 KVA. Kayang kaya naman. (",)

i might use the samwon or zieg 2k + or - for the 1000va kaya na ba ?

onkyo avr   340watts
40d550 lcd  180watt


anyone using cdrking servo avr on your onkyo?

[jcsantamarina]

i might use the samwon or zieg 2k + or - for the 1000va kaya na ba ?

onkyo avr   340watts
40d550 lcd  180watt


anyone using cdrking servo avr on your onkyo?

Kaya naman Yung requirements mo with the 1kva.
Pero, I'm not a Fan of CDRKing stuff and considering how costly our setup is with the Onky's, I'd rather stay away from their AVR's.

[raider125jeigh]

Kaya naman Yung requirements mo with the 1kva.
Pero, I'm not a Fan of CDRKing stuff and considering how costly our setup is with the Onky's, I'd rather stay away from their AVR's.

thanks sir
i might purchase samwon let me see what would be might budget this coming payday

anu po cooler and gamit nyo sa onkyo?

[jcsantamarina]

thanks sir
i might purchase samwon let me see what would be might budget this coming payday

anu po cooler and gamit nyo sa onkyo?

No need na with the 809 IMHO. If you backread a bit, it was mentioned that it has fans built in, unlike my previous 509 which tends to get hot after a while of use.

[defcon3]

ei mga sirs, small questions... any info for the srp of 3008 and 1008? between the units, which would you prefer to use for HT? thanks.

[Onkyo606]

ei mga sirs, small questions... any info for the srp of 3008 and 1008? between the units, which would you prefer to use for HT? thanks.

1008 around 70 plus K 3008 baka mga 100 plus k kung local unit at kung may makukuha pa

3008 hands down, the 1008 and 808 are relatively the same, the 3008 has XT 32 audyssey multeq and is very good in calibrating the subwoofer

[defcon3]

1008 around 70 plus K 3008 baka mga 100 plus k kung local unit at kung may makukuha pa

3008 hands down, the 1008 and 808 are relatively the same, the 3008 has XT 32 audyssey multeq and is very good in calibrating the subwoofer

  ...sure kayo sir sa prices? hebigat ...i can buy 2 units from 100k plus and almost 2 units from 1008 here....

[raider125jeigh]

pwede po ba gamitin ung

armorall sa onkyo receiver natin panglinis?

anu po panlinis at papakintab nyo?

[plapoy]

pwede po ba gamitin ung

armorall sa onkyo receiver natin panglinis?

anu po panlinis at papakintab nyo?

sakin sir.. glade na lemon scent... once a month siguro para onti punas lang tanggal na ang mga gabok..

[raider125jeigh]

sakin sir.. glade na lemon scent... once a month siguro para onti punas lang tanggal na ang mga gabok..

ok po ba hindi nag fafade ?
saan po meron nyan?

anyone uses armorall?

[jcsantamarina]

ok po ba hindi nag fafade ?
saan po meron nyan?

anyone uses armorall?

Ako, I just use a damp cloth if I notice that it's a little dusty. Make sure that it's not too wet para walang pumatak sa loob.
I also put a cloth on it so that it's covered when not in use.