Topic: ONKYO AVR

[mikeer2002ph]

Which AV stores in Manila have the widest range of onkyo receivers available for viewing and possibly demo? Sa Toyama sa Timog po ba may showroom at pwede ma audi mga onkyo brands?

Toyama is the main distributor of Onkyo. I think they have a showroom in Timog QC that you can go to so you can see their offerings

AVShop (MLY Enterprises) is also in QC.

In manila (city of manila), there's one - AVX in Harrison Plaza (beside McDo / Max's)

[anya618]

In manila (city of manila), there's one - AVX in Harrison Plaza (beside McDo / Max's)

ito ba sir yung dating IMAGE Video?

[mikeer2002ph]

ito ba sir yung dating IMAGE Video?

YES! Eto nga sila (AVX - the former Image Video that used to peddle LDs). They have the same friendly people there.

[anya618]

YES! Eto nga sila (AVX - the former Image Video that used to peddle LDs). They have the same friendly people there.

ang tagal na nito, di pa nasusunog ang old harrison plaza andun na sila

[robdjhojd]

Guys, Just Bought Onkyo 3009 dito sa UAE ok ba i pair ang A-Audio Genesis FS dito, thanks

[mdsaint3]

sir pls recommend an ht receiver.. miski 5.1 lang to be used to drive my old mission m73i and m73center channel speakers.. still going to buy a sub and surround speakers.

will use for a small room lang.. 15-20 sqm.

di na ko familiar sa models.. simplest model na pwede kabitan ng dvd and computer.

how much and san best place to buy that accepts cc payment.installment preferably using citibank

[EugeneCruise]

Have a problem with my TXNR609.  No Audio and Video on HDMI pass through output but the front panel has display.  After I used a watt meter to check consumption of the AVR on standby it was still ok then when I used it a day after it did not work na.

What could be the problem?  I tried connecting the Cignal box and BDP directly to the LCD and it worked fine without any problems.  Unit is still under warranty from SnS.

[Billabong]

Have a problem with my TXNR609.  No Audio and Video on HDMI pass through output but the front panel has display.  After I used a watt meter to check consumption of the AVR on standby it was still ok then when I used it a day after it did not work na.

What could be the problem?  I tried connecting the Cignal box and BDP directly to the LCD and it worked fine without any problems.  Unit is still under warranty from SnS.

Better send it back to SnS ASAP for warranty.

[joko11]

Have a problem with my TXNR609.  No Audio and Video on HDMI pass through output but the front panel has display.  After I used a watt meter to check consumption of the AVR on standby it was still ok then when I used it a day after it did not work na.

What could be the problem?  I tried connecting the Cignal box and BDP directly to the LCD and it worked fine without any problems.  Unit is still under warranty from SnS.

onkyo hdmi issue strike again

[raider125jeigh]

Have a problem with my TXNR609.  No Audio and Video on HDMI pass through output but the front panel has display.  After I used a watt meter to check consumption of the AVR on standby it was still ok then when I used it a day after it did not work na.

What could be the problem?  I tried connecting the Cignal box and BDP directly to the LCD and it worked fine without any problems.  Unit is still under warranty from SnS.

reset it bro

baka madale pa hehe...

[vgsison]

Based on my experience with SnS, they will advise u to bring the onkyo unit directly to Toyama.

[defcon3]

Have a problem with my TXNR609.  No Audio and Video on HDMI pass through output but the front panel has display.  After I used a watt meter to check consumption of the AVR on standby it was still ok then when I used it a day after it did not work na.

What could be the problem?  I tried connecting the Cignal box and BDP directly to the LCD and it worked fine without any problems.  Unit is still under warranty from SnS.

check 1st if your unit is included in the recall issues. you just need the serial number


http://www.onkyousa.com/001a_modelreturn_entertype.cfm

[EugeneCruise]

reset it bro

baka madale pa hehe...

How to reset it the unit?

Sayang, I just brought it to SnS na din as per Sir Vic.

[raider125jeigh]

How to reset it the unit?

Sayang, I just brought it to SnS na din as per Sir Vic.

check the manual bro... may setting yan to reset the unit...

that the first thing to do once receiver is acting

[defcon3]

press and hold vcr + power button FROM the rcvr/unit for a few sec, it will show clear from display.

[joko11]

Based on my experience with SnS, they will advise u to bring the onkyo unit directly to Toyama.

ganun
kahit under warranty pa?

[ninjababez®]

ganun
kahit under warranty pa?

mas mabilis yata pag diretso sa distro/service center.

[audiojunkie]

mas mabilis yata pag diretso sa distro/service center.

kahit saan ganyan ang sistema, sa service center dapat dalhin ang appliances kung may problema basta dala mo ang warranty card kung valid pa or receipt as proof of purchased kung kailanganin for verification. 

[joko11]

sa pagkakakilala ko sa SnS once found defective ang unit papalitan nila ng bagong unit.ang hindi ko alam kung hangang kelan ang replacement period

[audiojunkie]

Dito kasi Kwt, kung meron complain sa produkto susubukan munang ayusin at kung talagang 'di na maaus saka nila papalitan ng bago.. 

[Weng!]

question mga brader.

can an onkyo AVR (non-3D model) pass thru 3D signal using hdmi from bluray to a 3D display?

[oReOsHaKe]

question mga brader.

can an onkyo AVR (non-3D model) pass thru 3D signal using hdmi from bluray to a 3D display?

No.  But you can still watch 3D movies without a 3D capable AVR.  You will use 2 HDMI cables, one from the 3D player to the AVR for the sound, one from the 3D player to the TV for the Video.  This is assuming that your 3D player has 2 HDMI output ports.

[Tempter]

question mga brader.

can an onkyo AVR (non-3D model) pass thru 3D signal using hdmi from bluray to a 3D display?

This is just my theory, since the output of the avr cannot support huge 3D data, then logically it cannot pass-through either.

[Tempter]

No.  But you can still watch 3D movies without a 3D capable AVR.  You will use 2 HDMI cables, one from the 3D player to the AVR for the sound, one from the 3D player to the TV for the Video.

Baka mas mabuti pa idirect na lang yung player sa tv. 

[oReOsHaKe]

This is just my theory, since the output of the avr cannot support huge 3D data, then logically it cannot pass-through either.

Hi-end 3D capable AVR can pass through 3D signals..

[oReOsHaKe]

Baka mas mabuti pa idirect na lang yung player sa tv. 

You will still  need the AVR for the sound..

[Tempter]

Hi-end 3D capable AVR can pass through 3D signals..

I'm in the premise of the question sir. Since his AVR is non-3D.

[Weng!]

monoprice has a product that splits a single HMDI into 2 HDMI that supports 3D. one output can feed the display and the other to the avr. hopefully this will be the answer.



1X2 PRO Series Powered HDMI® Splitter with 3D support (Rev. 2.0)

[Weng!]

No.  But you can still watch 3D movies without a 3D capable AVR.  You will use 2 HDMI cables, one from the 3D player to the AVR for the sound, one from the 3D player to the TV for the Video.  This is assuming that your 3D player has 2 HDMI output ports.

i don't own a BD player. is 2 hdmi output a standard now on BDPs?

if using a BD player with one hdmi out, i can hook the hdmi direct to the display and use optical for audio.

heard that optical does not support HD audio. will i miss a lot of "bang" if using the conventional audio format?

[oReOsHaKe]

i don't own a BD player. is 2 hdmi output a standard now on BDPs?

if using a BD player with one hdmi out, i can hook the hdmi direct to the display and use optical for audio.

heard that optical does not support HD audio. will i miss a lot of "bang" if using the conventional audio format?

It's not standard for 3D players to have 2 HDMI output ports.  I know OPPO 3D players have 2 HDMI output ports.

If you are into 3D, I guess it will be best to have HD sound together with 3D viewing.  Optical does not support HD audio.  Only HDMI.