Topic: ONKYO AVR

[raider125jeigh]

yessir but your 805 is made in japan
trade? 

hahaha.. ayaw hehehe.... eto ung pangarap ko na avr eversince ehehe...
ititira ko ung avr na to hehe.... love ko na talaga sya... best paired with rti a hehe...
papasyal naman minsan dyan sa lugar mo...shot shot din...dala nalang na alak at pulutan

onkyo 875 din type ko

[ninjababez®]

whoa!   di ba masyadong bright ang combination mo bro?

[≧◉◡◉≦xrampage≧◉◡◉≦]

whoa!   di ba masyadong bright ang combination mo bro?

Ano new speaker mo? hehehe

[raider125jeigh]

whoa!   di ba masyadong bright ang combination mo bro?

onkyo 805 + rti a one of the best...detailed .....
pio 1021 hindi uubra sa polk audio hehehe..

[mondz]

mura na yan bro

@ninjababez

but how about the performance? do you think OK ito? for movie and gaming??? =)

[ninjababez®]

@ninjababez

but how about the performance? do you think OK ito? for movie and gaming??? =)

price / performance ratio of the item you mentioned is more than OK.
ngayon kung gusto mo talagang OK na setup dyan, mas mataas ang price.  eto sunod kong tanong, magkano ba budget natin? 

[Billabong]

whoa! di ba masyadong bright ang combination mo bro?

Nagkaroon din ako ng 805 before. Mataba, weighty, impactful at nasa warm side yung sound niya compared sa 809. Yung 809 sounds brighter, leaner and mas madetalye. Mas malutong din yung mga kalansing at mas defined yung individual instruments sa concerts. Sa PQ/video processing aspect hands down mas maganda ang 809.

[ninjababez®]

bro paul, gamit mo ba yung pic processing sa 809?  meron ba nito ang 807?  if yes, pano sya gamitin
wag mo sabihin RTFM ha.. mahina ako sa pagbabasa

[Billabong]

bro paul, gamit mo ba yung pic processing sa 809?  meron ba nito ang 807?  if yes, pano sya gamitin
wag mo sabihin RTFM ha.. mahina ako sa pagbabasa

Hindi pa ako nagkakaroon niyang 807 bro so hindi ko alam. Try mo na lang kalikutin yung set-up menu ng receiver. Meron dun video settings.

[ninjababez®]

Hindi pa ako nagkakaroon niyang 807 bro so hindi ko alam. Try mo na lang kalikutin yung set-up menu ng receiver. Meron dun video settings.

sablay kasi mangalikot dito, kasi patay ang screen.  unlike sa denon pwede ka manood habang nagpapalit ng settings

[jao143]

sablay kasi mangalikot dito, kasi patay ang screen.  unlike sa denon pwede ka manood habang nagpapalit ng settings

Sa 808 bro pwede, nakaoverlay sa video screen

[ninjababez®]

Sa 808 bro pwede, nakaoverlay sa video screen

sa tingin mo may option sa 807 bro jao?

[Clondalkin]

Malamang wala Jamy.  Set-up Menu Overlay is ON by default kung meron.  Make up your mind habang BAKA puede mo pang palitan ng mas bago.

BTW, since you are using a VT30, no need to bother about the AVR's video processing.  Magaling na yung TV mo sa video processing, and malamang, magaling na ring yung graphics card ng PC mo.  Although it's good to try for the sake of science.  I had tried video processing with the 1008 and the 809 but eventually turned it OFF and set to PASS-THROUGH - no need.

sa tingin mo may option sa 807 bro jao?

[mav14]

As for the 3008, merong overlay for some of the settings (listening modes, quick audio/video setting changes, etc). But for the complete setup menu (speaker settings, levels, etc), black screen na. Kaso may HDMI handshake issue when it switches back to my HTPC hehehe

[ninjababez®]

As for the 3008, merong overlay for some of the settings (listening omodes, quick audio/video setting changes, etc). But for the complete setup menu (speaker settings, levels, etc), black screen na. Kaso may HDMI handshake issue when it switches back to my HTPC hehehe

so far wala handshake issue sa akin bro.  Switching between standyby mode,ON via xbox and htpc, on the fly ang switching.  Pretty much like my denon

Malamang wala Jamy.  Set-up Menu Overlay is ON by default kung meron.  Make up your mind habang BAKA puede mo pang palitan ng mas bago.

BTW, since you are using a VT30, no need to bother about the AVR's video processing.  Magaling na yung TV mo sa video processing, and malamang, magaling na ring yung graphics card ng PC mo.  Although it's good to try for the sake of science.  I had tried video processing with the 1008 and the 809 but eventually turned it OFF and set to PASS-THROUGH - no need.

bro alan ok lang naman since i wanted a pass thru mode sa video.  Not really a fan of onkyo or any other receivers vidro processing.  Lalo na at ang ganda ng tv natin

[mav14]

I'm using Win7 64-bit + ATI HD 5450 for my HTPC. I lose audio when I switch back from the setup menu. Sometimes when I pause the movie and resume, nawawala rin. It switches to analog (based on the front panel display) when I pause/cut the hdmi signal. Hindi maka-establish ng HDMI audio afterwards. I tried researching for possible solutions pero wala pa ako nahanap na nag-work. I can live with it naman. And I'm very happy with the SQ of the Onkyo (and the MultEQ XT32 sub processing) for HT. Hassle lang pag wife ko nanonood tapos nawawala audio, nagagalit sa 'kin haha

Btw, it only happens with the HTPC. For the BD player, no hdmi handshake issue.

[ninjababez®]

I'm using Win7 64-bit + ATI HD 5450 for my HTPC. I lose audio when I switch back from the setup menu. Sometimes when I pause the movie and resume, nawawala rin. It switches to analog (based on the front panel display) when I pause/cut the hdmi signal. Hindi maka-establish ng HDMI audio afterwards. I tried researching for possible solutions pero wala pa ako nahanap na nag-work. I can live with it naman. And I'm very happy with the SQ of the Onkyo (and the MultEQ XT32 sub processing) for HT. Hassle lang pag wife ko nanonood tapos nawawala audio, nagagalit sa 'kin haha

Btw, it only happens with the HTPC. For the BD player, no hdmi handshake issue.

its quite normal bro, kasi kung digital audio (DD, DTS, HD audio) minsan talaga sa player na ng htpc natin.  for some reason di sila mag sync.  so far have not experience that with my current receivers.  but had that issue with my onkyo 508 and denon 1509

[Billabong]

Malamang wala Jamy.  Set-up Menu Overlay is ON by default kung meron.  Make up your mind habang BAKA puede mo pang palitan ng mas bago.

BTW, since you are using a VT30, no need to bother about the AVR's video processing.  Magaling na yung TV mo sa video processing, and malamang, magaling na ring yung graphics card ng PC mo.  Although it's good to try for the sake of science.  I had tried video processing with the 1008 and the 809 but eventually turned it OFF and set to PASS-THROUGH - no need.

Magkaiba tayo ng experience sir.. I'm also using an HTPC (calibrated and processed using AMD Catalyst) connected to an Epson 8700 projector but the PQ still improved a lot when I turned ON the video processing in my Onkyo 809.

[raider125jeigh]

Magkaiba tayo ng experience sir.. I'm also using an HTPC (calibrated and processed using AMD Catalyst) connected to an Epson 8700 projector but the PQ still improved a lot when I turned ON the video processing in my Onkyo 809.

09 series ganda daw video processing....

makabili na nga ng 1009 hahaha... 805 in the market...ipon ipon hahaha... nyahahahaha....

[ninjababez®]

09 series ganda daw video processing....

makabili na nga ng 1009 hahaha... 805 in the market...ipon ipon hahaha... nyahahahaha....

seryoso ba yan?

[mav14]

its quite normal bro, kasi kung digital audio (DD, DTS, HD audio) minsan talaga sa player na ng htpc natin.  for some reason di sila mag sync.  so far have not experience that with my current receivers.  but had that issue with my onkyo 508 and denon 1509

Thanks for the feedback. I never experienced it with my Yamaha 663 though. Anyway, I'm all good with the Onkyo despite this minor issue

[ninjababez®]

mga bros
pano ba baguhin yung sub cutoff sa onkyo 807?
di ko makita sa speaker setup option eh, thanks

[Stagea]

mga bros
pano ba baguhin yung sub cutoff sa onkyo 807?
di ko makita sa speaker setup option eh, thanks

Try disabling the THX Ultra2/Select2 Subwoofer setting, then check if this makes the LPF of LFE option appear.

[ninjababez®]

Try disabling the THX Ultra2/Select2 Subwoofer setting, then check if this makes the LPF of LFE option appear.

thanks bro
sabi ko na si master ivanessa ang sasagot eh

[Stagea]

thanks bro
sabi ko na si master ivanessa ang sasagot eh

Nagmamaru lang po, master. Baka sakali lumitaw.

[raider125jeigh]

thanks bro
sabi ko na si master ivanessa ang sasagot eh

haha.... merienda lang katapat daw hehe...
check ko nga to  THX Ultra2/Select2 Subwoofer setting

sa 805 kaya meron yan haha..

[ninjababez®]

Badtrip even when thx disabled ayaw nya pumayag lower than 80hz ang sub cutoff

[raider125jeigh]

Badtrip even when thx disabled ayaw nya pumayag lower than 80hz ang sub cutoff

yup tama ganyan din saken...ayaw nya ng mas mababa pa sa 80hz,..ayan pala ung want mo mangyari... pero hind ko pa nacheck ung thx setting...

[ninjababez®]

Though comfortable naman ako @ 80hz, gusto rin subukan lower sayang naman baka mas maganda kung lower.

[raider125jeigh]

Though comfortable naman ako @ 80hz, gusto rin subukan lower sayang naman baka mas maganda kung lower.

ah ok
jammy gumagamit kaba ng spl meter? hehehe
worth it ba ung spl or better pa din talaga ung aud/mcacc/ypao