Author Topic: * Junkie's Music System * DONE? Not Yet Maybe... ! ! ! (Read 448408 times)

defcon3 · « **Reply #2700 on:** Jul 06, 2011 at 01:39 AM »

Quote from: audiojunkie on Jul 06, 2011 at 01:07 AM

'd mo kailangan ito dahil ang amp mo meron naman yan auto calibration feature. ito kasing preamp ko jurrasic na kaya kailangan ko ang ganitong device, pero effective pa rin ito sa manual calibration...

ah,dahil sa audysey?...pero mas accurate naman ata sir yang gears nu.

audiojunkie · « **Reply #2701 on:** Jul 06, 2011 at 02:19 AM »

Quote from: defcon3 on Jul 06, 2011 at 01:39 AM

ah,dahil sa audysey?...pero mas accurate naman ata sir yang gears nu.

added feature lang nito ang THX Room Equalization for notch filter to trim ang room nodes at ang result single note bass at 'di boomy kahit anong volume level. Ask mo si AB noong manood sila dito ng concerts . Sayang nagmamadali kasi noong dumaan kayo dito.

defcon3 · « **Reply #2702 on:** Jul 09, 2011 at 05:48 AM »

sir, musta na?mukhang tahimik ata ng ilang araw...or sadyang bc.

audiojunkie · « **Reply #2703 on:** Jul 09, 2011 at 09:39 PM »

Quote from: defcon3 on Jul 09, 2011 at 05:48 AM

sir, musta na?mukhang tahimik ata ng ilang araw...or sadyang bc.

Tahimik na talaga dito...

Done for Now na ...

pahabol...

pero....meron pala WIP...

defcon3 · « **Reply #2704 on:** Jul 13, 2011 at 03:48 AM »

Quote from: audiojunkie on Jul 09, 2011 at 09:39 PM

Tahimik na talaga dito... Done for Now na ...

pahabol...

pero....meron pala WIP...

magaantay q bukas.baka may bago

...THANK GOD ITS WEDNESDAY!!!

audiojunkie · « **Reply #2705 on:** Jul 13, 2011 at 03:54 AM »

Quote from: defcon3 on Jul 13, 2011 at 03:48 AM

magaantay q bukas.baka may bago ...THANK GOD ITS WEDNESDAY!!!

kung meron man bago sa pamilihan malabo na mapunta sa akin....

segurado na yan sa mga early birds..

late na ang out ko sa hapon....

defcon3 · « **Reply #2706 on:** Jul 13, 2011 at 03:57 AM »

Quote from: audiojunkie on Jul 13, 2011 at 03:54 AM

kung meron man bago sa pamilihan malabo na mapunta sa akin.... segurado na yan sa mga early birds.. late na ang out ko sa hapon....

asus...hahakot na naman siguro si AB..

audiojunkie · « **Reply #2707 on:** Jul 13, 2011 at 04:09 AM »

Quote from: defcon3 on Jul 13, 2011 at 03:57 AM

asus...hahakot na naman siguro si AB..

segurado yan..laging kapal baon nun...

audiojunkie · « **Reply #2708 on:** Jul 18, 2011 at 01:20 AM »

DIY Simple TT-Clamp:

10mm THK. Acrylic w/ removable center piece

Playing ...

with additional weight (center piece removed)

Initial impresions; More solid bass, more clarity on mid and extended highs.

As others expression.. mas makapal ang tunog....

Thanks for looking...

♡ lvcdg23™ ✌ · « **Reply #2709 on:** Jul 18, 2011 at 07:47 AM »

Ganda talaga ng mga gears nyo sir Mon lalo nat organize na organize na ang gallery. Idol ko talaga kayo sa DIY

Pero sir Mon parang may gustong magpaupgrade... yung...
Display na Samsung 32"

audiojunkie · « **Reply #2710 on:** Jul 18, 2011 at 11:32 AM »

Quote from: Louie_18 on Jul 18, 2011 at 07:47 AM

Ganda talaga ng mga gears nyo sir Mon lalo nat organize na organize na ang gallery. Idol ko talaga kayo sa DIY

Pero sir Mon parang may gustong magpaupgrade... yung...
Display na Samsung 32"

Thanks sir Louie, buti pinaalala nyo wala kasi yan sa aking long list... puro tweak(X2) lang DIY ang naka lista...

audiojunkie · « **Reply #2711 on:** Jul 24, 2011 at 03:04 AM »

Another tweak device:

Picked-up from used market today...
..a bit battered externally but still in good working condition:

More Infos:
http://www.furmansound.com/product.php?div=04&id=AC-210E
http://www.dreamav.co.uk/furman_ac-210E_power_conditioner.html

Thanks!...

oweidah · « **Reply #2712 on:** Jul 30, 2011 at 07:32 AM »

Ramadan kareem sadik! nakakasa na ba budget para sa ramadan audio sale diyan? gogogo

audiojunkie · « **Reply #2713 on:** Jul 30, 2011 at 05:07 PM »

Quote from: ojofool on Jul 30, 2011 at 07:32 AM

Ramadan kareem sadik! nakakasa na ba budget para sa ramadan audio sale diyan? gogogo

Shukran Sadik Ojo!.. Ramadan Mubarak! Nakakasa pero budget wala pa...

audiojunkie · « **Reply #2714 on:** Aug 03, 2011 at 07:26 AM »

Had a chance to listen tonight on some vintage gears owned by fellow enthusiasts... gears are: Luxman L85v & Marantz 63 mk II KI sig. - by Audiobackyard (now posted on his gallery); SansuiSix - by a good friend ours & my own Akai AA-1150. Speakers Paradigm Studio 60 v3, Spkr & IC - Chord. It was very nice and enjoyable Listening experience on different analog gears at same environment. But unfortunate no pictures...

my cam is on other assignment and the other one charger could not be found....

fone cam also not working properly....

Here's the netpic of Sansui:

audiojunkie · « **Reply #2715 on:** Aug 27, 2011 at 05:05 AM »

Cork/Rubber Isolation Pad

Another simple tweak to reduce if not completely eliminate rack/equipment borne vibrations that could affect the performance of the system.

Similar Product:

http://www.questforsound.com/accessories/acc_sqIsolPads.htm

Thanks for Looking...

corpse grinder · « **Reply #2716 on:** Aug 27, 2011 at 10:28 AM »

ganda ng T.T nyo master,next project ko din turntable sna.saan nyo pla na bili yung Rubber Isolation Pad?

audiojunkie · « **Reply #2717 on:** Aug 28, 2011 at 04:01 AM »

Quote from: corpse grinder on Aug 27, 2011 at 10:28 AM

ganda ng T.T nyo master,next project ko din turntable sna.saan nyo pla na bili yung Rubber Isolation Pad?

Thanks! sir Grinder...

sa isang local market sir. last set na lang daw ito...

try mo dyan sa atin baka meron sa mga electronic shops. actually, gamit din ito sa mechanical installation esp. sa roof deck as anti-vibration.

pahabol; musta na pala setup mo? post mo na sa gallery..

corpse grinder · « **Reply #2718 on:** Aug 28, 2011 at 01:02 PM »

ayos na sir ganda na ng tunog salamat nga pala,sige tingin tingin ako sa mga shop,hnd ako marunong mag post.hehehe pag aralan ko muna.sya nga pla akin na lang yung isang turntable mo ganda eh...joke lang...

audiojunkie · « **Reply #2719 on:** Aug 28, 2011 at 04:31 PM »

Quote from: corpse grinder on Aug 28, 2011 at 01:02 PM

ayos na sir ganda na ng tunog salamat nga pala,sige tingin tingin ako sa mga shop,hnd ako marunong mag post.hehehe pag aralan ko muna.sya nga pla akin na lang yung isang turntable mo ganda eh...joke lang...

Okay, enjoytime na!...

baka meron din dyan kapareho. gusto ko pa rin nga bumili pa kung makakita ako... effective kasi, maski e-tap ko yung glass shelve habang tumutugtug walang transfer ng vibration or any nasty feedback sa TT...

walang problema kung mahihintay m ayawan ko na...

marami nga nagkakagusto dito dahil nga kakaiba at rare pa...

corpse grinder · « **Reply #2720 on:** Aug 28, 2011 at 08:26 PM »

ang ganda kasi ser....parang malabo ata mang yari yun ser na bitawan mo yung TT kung ganyan ka ganda ang setup....

audiojunkie · « **Reply #2721 on:** Aug 29, 2011 at 08:45 PM »

Quote from: corpse grinder on Aug 28, 2011 at 08:26 PM

ang ganda kasi ser....parang malabo ata mang yari yun ser na bitawan mo yung TT kung ganyan ka ganda ang setup....

'di natin masabi sir...

audiojunkie · « **Reply #2722 on:** Aug 29, 2011 at 08:57 PM »

WIP:

Took advantage the short working hours during the Holy Month of Ramadan, used the extra time to work on another DIY project.

Wood Parts cut, Pre-drilled and Dyed.

Wood Crews, Bolts, Pegs, Allen & Philips Screw tools

Hardened Plastic Spikes

Thanks for looking!

at_sunset_blvd · « **Reply #2723 on:** Aug 30, 2011 at 09:03 AM »

Quote from: audiojunkie on Aug 27, 2011 at 05:05 AM

Cork/Rubber Isolation Pad

Another simple tweak to reduce if not completely eliminate rack/equipment borne vibrations that could affect the performance of the system.

Similar Product:

http://www.questforsound.com/accessories/acc_sqIsolPads.htm

Thanks for Looking...

Nice Isolation Pads Sir

stilljey · « **Reply #2724 on:** Aug 30, 2011 at 11:19 AM »

wow , vintage

audiojunkie · « **Reply #2725 on:** Aug 30, 2011 at 11:37 AM »

Quote from: at_sunset_blvd on Aug 30, 2011 at 09:03 AM

Nice Isolation Pads Sir

Thanks sir sunset_blvd ...

audiojunkie · « **Reply #2726 on:** Aug 30, 2011 at 11:39 AM »

Quote from: stilljey on Aug 30, 2011 at 11:19 AM

wow , vintage

Thanks sir Stilljey..

that's the main attraction of my setup...

audiojunkie · « **Reply #2727 on:** Aug 31, 2011 at 02:26 PM »

Work Progress...

Armed with basic tools and crude knowlwedge in carpentry decided to modify my existing A/V Ikea Rack.

Stage 2: Assembly

Wood Peg fitted ...

Anchor Bolt ...

Anchor Bolt Locked ...

Wood Bolt In-placed and Tightened ...

Thanks! ..

audiojunkie · « **Reply #2728 on:** Sep 03, 2011 at 01:52 AM »

Finally, Done my DIY Rack modified the existing Ikea A/V rack. Added wooden frames and black glass top (reused from old TV stand).Some joints were not perfectly fit, even the finish is not as I wanted. The actual color is completely different from sample in the store...

Your comments are welcome....