Author Topic: * Junkie's Music System * DONE? Not Yet Maybe... ! ! ! (Read 431061 times)

Tsnad · « **Reply #3180 on:** Mar 10, 2014 at 10:11 AM »

ang ganda ng mga caps, audiophile grade

audiojunkie · « **Reply #3181 on:** Mar 10, 2014 at 11:27 AM »

Quote from: Tsnad on Mar 10, 2014 at 10:11 AM

ang ganda ng mga caps, audiophile grade

Thanks brader Tsnad, yan na ang pinakamura nakuha from different sources kaya mixed-nuts sila. Decided to use combi of electrolytic + poly at woofer & mid due to budget constraint. But I found that elect values offset far from it's rating. If you notice the 100++ are actually 100uf labeled. Polys have very minimal that we can say within the 5 - 10% tolerance.

Malaking ruling rin yung measuring tool to know the actual value of caps & inductors.

redstarrising · « **Reply #3182 on:** Mar 10, 2014 at 08:43 PM »

Hanep sa crossover and daming parts puro gold pa

audiojunkie · « **Reply #3183 on:** Mar 10, 2014 at 11:02 PM »

Quote from: redstarrising on Mar 10, 2014 at 08:43 PM

Hanep sa crossover and daming parts puro gold pa

Casing lang yung color gold, di pure gold...

ROE electrolytic 100uf & 47uf (made in Germany) ginamit ko sa woofer at mixed w/ poly sa midrange.

audiojunkie · « **Reply #3184 on:** Mar 12, 2014 at 06:37 PM »

Update....

2 Main Boards done

Next the "T" Bass Driver (Caps & Inductors mounted)

audiojunkie · « **Reply #3185 on:** Mar 14, 2014 at 02:01 PM »

Test mode: (using extra drivers laying around)

Woofer, mid & Twt1 are ok but no sound on Twt2. Have to trace back the circuit of any problem.

audiojunkie · « **Reply #3186 on:** Mar 14, 2014 at 03:44 PM »

Have to redraw the Twt2 diagram to get clear view of the circuit:

Original diagram w/ values from calculations & actual installed:

Still busy to redraw them...

audiojunkie · « **Reply #3187 on:** Mar 16, 2014 at 12:21 AM »

Crossover - Speaker Wires:

Nylon mesh enhanced the looks...

redstarrising · « **Reply #3188 on:** Mar 16, 2014 at 08:10 AM »

Quote from: audiojunkie on Mar 16, 2014 at 12:21 AM

Crossover - Speaker Wires:

Nylon mesh enhanced the looks...

Ayos!!! abalang abala sa mga epektus ang ganda

audiojunkie · « **Reply #3189 on:** Mar 17, 2014 at 01:09 AM »

Quote from: redstarrising on Mar 16, 2014 at 08:10 AM

Ayos!!! abalang abala sa mga epektus ang ganda

Thanks bro... Nakakatuwa kasi makita nabubuo yung mga inisip nating gawin...

Magaganda rin yung collection mo mga TT ... Naalala ko tuloy mga TT ko rin nun...

audiojunkie · « **Reply #3190 on:** Mar 17, 2014 at 01:08 PM »

Intermission to the build...

Cobalt in Blue - Small wonder with a BIG & Great sound...

Thanks for looking...

joko11 · « **Reply #3191 on:** Mar 17, 2014 at 11:16 PM »

anu yan? detonator?

audiojunkie · « **Reply #3192 on:** Mar 18, 2014 at 12:56 AM »

Quote from: joko11 on Mar 17, 2014 at 11:16 PM

anu yan? detonator?

Hehehe.... Ambilical cord yan ng Quadruplets...

audiojunkie · « **Reply #3193 on:** Mar 19, 2014 at 06:31 PM »

Back to the Build...

Wood Works:

The groove

The shades

audiojunkie · « **Reply #3194 on:** Mar 24, 2014 at 06:34 PM »

Recap work in between build..

Very lucky to get hold these caps:

Group pix

Closer look

Destination

Comparison - same value

First install...

Any comments are welcome... Thanks for looking..

redstarrising · « **Reply #3195 on:** Mar 25, 2014 at 10:18 AM »

sure maganda outcome nyan using ELNA caps. Painitin na agad ng masubukan

audiojunkie · « **Reply #3196 on:** Mar 25, 2014 at 06:16 PM »

Quote from: redstarrising on Mar 25, 2014 at 10:18 AM

sure maganda outcome nyan using ELNA caps. Painitin na agad ng masubukan

Napainit na bro... Pero first time power up kinabahan ako di umilaw yung pilot lamp, kaya off agad. Second try umilaw na at sunod nag click na ang relay..... Ilang minuto rin bago tumunog.... Agad napansin ko pinagbago ng tunog... More spacious at lumakas ang output level. Sa ngayon disconnected ulit for next install...

audiojunkie · « **Reply #3197 on:** Mar 27, 2014 at 12:16 PM »

Continued recap work last night but encountered cap size problem...

Original caps

Space after old cap removed

audiojunkie · « **Reply #3198 on:** Mar 27, 2014 at 12:20 PM »

Size comparison of old & new caps...

redstarrising · « **Reply #3199 on:** Mar 27, 2014 at 01:28 PM »

sometimes we encountered space constraint, anyway magagawan mo pa rin ng paraan bro and trust you

as long you use premium parts

, yun nga lang its look like you build leaning tower of pisa

. Yun ibang caps diretso tayo

audiojunkie · « **Reply #3200 on:** Mar 27, 2014 at 06:07 PM »

Quote from: redstarrising on Mar 27, 2014 at 01:28 PM

sometimes we encountered space constraint, anyway magagawan mo pa rin ng paraan bro and trust you as long you use premium parts , yun nga lang its look like you build leaning tower of pisa . Yun ibang caps diretso tayo

Ganun nga seguro ang kalalabasan.... Leaning cap....

Solution I tried, bent leads and use the side spaces will look like this...