0 Members and 1 Guest are viewing this topic.
Hehe! How was your experience with the Ice. yan dati ang gamit ko. Malakas din yan bro. So pati pala PSU kinuha mo din at kasama. Nung una, i find it too lean sounding for me, pero parang masmaganda nga ang lean sounding kasi mas-defined ang instruments. How much ang kuha mo ng module? Pang BTL module ba yun nasa gitna?
ICE Transplant completed...Run-in & Test mode..Initial impression; Lamig tumunog ....
Another nice project sir. congrats!
Sir balance input ba yung 200asc mo? I see balance module pcb sa likod kasi plus 6 wire connector yung input ng 200asc.Sir Nelson 200$ for a pair maganda na price nyan kuha na ulit, pero sana may available na SE mode input lang para wala na additional boards.
Mura nga ano? So 2 pcs of amp yun meaning naka-BTL siya tama? Kasi AFAIK, stereo ang module ng 200ASC di ba?
Sir meron balance at RCA inputs, meron toggle switch to select. Original input PCB ng amp yan.Mura na nga sa ngayon, compare noong ilang taon nakalipas. Ito na seguro ang future ng mga bagong amps lalo na yung multi-channels.
Sir Nelson mono amp lang siya pero balance input config nya, so need talaga ng balance preamp or balance module para makabitan ng single ended source. Ito data sheet ohhttp://www.icepower.bang-olufsen.com/files/solutions/icepower200asc_datasheet_2.4.pdfMura na nga kuha ni sir Mon, meron sa ebay 120USD asking plus taxes at shipping pa.Sir balance to rca module yung nasa likod na pcb/module kumuha ng dc supply sa 200asc auxiliary na +/- 12V kaya anim na wires, 3 sa dc supply then 3 sa balance input. Kaya may toggle switch to select rca o balance input yung amp. Review ko yung docs at compare sa 125asx modules ko, pero laking mas mura na ito ngayon. Sana meron pa if may budget na, ilang modules nalang add ko para maka 7chanels.
Reintroducing my DIY OB speaker...ReTazO-OB15 originaly OB12 - replaced 12" with 15" woofer at H-frame enclosure. The 12" dia. baffle cut became bandpass port. Same X-over configuration posted at previous pages.FrontSideBackDetails...Thanks for looking...
Great piece of DIY audiojunkie.
galling talaga...san ka pa..binabate kita.
Good morning bro.......ganda diy spkr mo.
Thanks OBR... Happy and proud that I got great result despite of my crude tools and wood working skills. It's also a fantastic experience and learning during the build.
I've had the same experience audiojunkie, fitted the 1st row of seats today, played a some music & thought I've actually done it. The feeling of satisfaction is difficult to explain as many emotions are involved, I must admit I heaved a big sigh of relief.
Have these pieces cut by CNC for identical size, shape & inner cut-out. These will cover the mid & tweeter from dust and looks enhancement.
Good looking enhancements that will also be functional - congrats
Ganda ng pagkakatabas bro.
What glue you use bro?