Author Topic: * Junkie's Music System * DONE? Not Yet Maybe... ! ! ! (Read 432320 times)

banesto · « **Reply #3480 on:** Feb 01, 2015 at 09:55 AM »

Wow! my dream... Analysis Plus Oval One.

audiojunkie · « **Reply #3481 on:** Feb 01, 2015 at 11:08 AM »

Quote from: banesto on Feb 01, 2015 at 09:55 AM

Wow! my dream... Analysis Plus Oval One.

Mahilig din pala kayo bro sa FINK....

Ilagay ko na sa bubble wrap?

Analysis Plus Oval One

banesto · « **Reply #3482 on:** Feb 01, 2015 at 11:36 AM »

Ganda talaga...... cge ilagay na natin sa bubble wrap hahahaha.

audiojunkie · « **Reply #3483 on:** Feb 01, 2015 at 11:39 AM »

Quote from: banesto on Feb 01, 2015 at 11:36 AM

Ganda talaga...... cge ilagay na natin sa bubble wrap hahahaha.

Seryoso?... Imprenta ko na ulit ... Home add nyo?

banesto · « **Reply #3484 on:** Feb 01, 2015 at 05:02 PM »

Quote from: audiojunkie on Feb 01, 2015 at 11:39 AM

Seryoso?... Imprenta ko na ulit ... Home add nyo?

Yes seryoso hahaha.

audiojunkie · « **Reply #3485 on:** Feb 14, 2015 at 02:13 PM »

Quote from: banesto on Feb 01, 2015 at 05:02 PM

Yes seryoso hahaha.

audiojunkie · « **Reply #3486 on:** Feb 14, 2015 at 02:14 PM »

Reposting in time of this date ....

02-14-2015

https://m.youtube.com/watch?v=vM8SS2Akbjo

banesto · « **Reply #3487 on:** Feb 15, 2015 at 07:51 PM »

Hi bro gandang gabi.... Ano na balita?

audiojunkie · « **Reply #3488 on:** Feb 16, 2015 at 02:48 AM »

Quote from: banesto on Feb 15, 2015 at 07:51 PM

Hi bro gandang gabi.... Ano na balita?

Gandang umaga bro... Message ko na lang sa inyo kun meron na...

audiojunkie · « **Reply #3489 on:** Feb 27, 2015 at 12:24 AM »

SME Tonearm mods and looks upgrade . . .

I read about bronze or metal knife edge is one of the mods for this arm. As curious as a cat, got a great deal online to try it on my 3009 S2 imp. model ....

Original Look...

Replacement part (Bronze knife edge)

Side by side (bronze & original plastic knife edge)

Finally, Installed (took sometime to spot on the screw hole with ground wire attached inside the tube)

New Look (sporting bronze knife edge)

Here's a link, who tested the mod on different SME models...
http://www.tnt-audio.com/accessories/smebronze_e.html

On that exercised the result varies dependent on the model and specs. On my side, I found a very positive result. As others commented, great improvement on details, more defined LF region. Clinical or edginess experienced by others may be the extra details that was rolled off on plastic knife edge. Bytheway, I applied small drop of silicone oil to serve as lubricant and damping recommended by others

Thanks for looking...

Oldboyracer · « **Reply #3490 on:** Feb 27, 2015 at 06:13 PM »

Quote from: audiojunkie on Feb 27, 2015 at 12:24 AM

SME Tonearm mods and looks upgrade . . .

I read about bronze or metal knife edge is one of the mods for this arm. As curious as a cat, got a great deal online to try it on my 3009 S2 imp. model ....

Original Look...

Replacement part (Bronze knife edge)

Side by side (bronze & original plastic knife edge)

Finally, Installed (took sometime to spot on the screw hole with ground wire attached inside the tube)

New Look (sporting bronze knife edge)

Here's a link, who tested the mod on different SME models...
http://www.tnt-audio.com/accessories/smebronze_e.html

On that exercised the result varies dependent on the model and specs. On my side, I found a very positive result. As others commented, great improvement on details, more defined LF region. Clinical or edginess experienced by others may be the extra details that was rolled off on plastic knife edge. Bytheway, I applied small drop of silicone oil to serve as lubricant and damping recommended by others

Thanks for looking...

Congrats audiojunkie, gives the arm a better look & a real bonus in better sonics

audiojunkie · « **Reply #3491 on:** Feb 28, 2015 at 03:50 AM »

Quote from: Oldboyracer on Feb 27, 2015 at 06:13 PM

Congrats audiojunkie, gives the arm a better look & a real bonus in better sonics

Thanks OBR...! You're right great improvement on looks and performance...

dodie · « **Reply #3492 on:** Feb 28, 2015 at 04:01 AM »

pabile po ng isa.....

redstarrising · « **Reply #3493 on:** Feb 28, 2015 at 10:22 AM »

Nice upgrade bro, congrats!! kahanga hanga ka talaga

... i expect silver and gold soon hehehe.

Superman · « **Reply #3494 on:** Feb 28, 2015 at 10:28 AM »

Congratulations!

audiojunkie · « **Reply #3495 on:** Feb 28, 2015 at 01:02 PM »

Quote from: Dodie on Feb 28, 2015 at 04:01 AM

pabile po ng isa.....

Nag-iisa lang yan bossing Dodie.... Mawawalan ako hihimasing TT...

audiojunkie · « **Reply #3496 on:** Feb 28, 2015 at 01:09 PM »

Quote from: redstarrising on Feb 28, 2015 at 10:22 AM

Nice upgrade bro, congrats!! kahanga hanga ka talaga ... i expect silver and gold soon hehehe.

Thanks bro... Small upgrade makes a big difference... I found silver as classic and gold elegant looking ..

audiojunkie · « **Reply #3497 on:** Feb 28, 2015 at 01:09 PM »

Quote from: Superman on Feb 28, 2015 at 10:28 AM

Congratulations!

Thanks bro...

Oldboyracer · « **Reply #3498 on:** Feb 28, 2015 at 01:20 PM »

Quote from: audiojunkie on Feb 28, 2015 at 01:09 PM

Thanks bro... Small upgrade makes a big difference... I found silver as classic and gold elegant looking ..

+100

n o l · « **Reply #3499 on:** Feb 28, 2015 at 03:08 PM »

congrats! looking good!

audiojunkie · « **Reply #3500 on:** Feb 28, 2015 at 03:20 PM »

Quote from: Oldboyracer on Feb 28, 2015 at 01:20 PM

+100

For HT, I prefer black (beauty)..

Quote from: nolax on Feb 28, 2015 at 03:08 PM

congrats! looking good!

Thanks sir Nolax ... Also sounds good as it looks...

banesto · « **Reply #3501 on:** Feb 28, 2015 at 05:20 PM »

Congrats bro

audiojunkie · « **Reply #3502 on:** Feb 28, 2015 at 09:19 PM »

Quote from: banesto on Feb 28, 2015 at 05:20 PM

Congrats bro

Thanks bro...

hanggang tweaking at fine tuning na lang...

audiojunkie · « **Reply #3503 on:** Mar 07, 2015 at 03:21 AM »

SME 3009 S2 improved Removable Headshell
Custom Standard Tools . . .

Mounting Distance Guide: (215.4mm & 17.8 mm overhang)

Cartridge Alignment Protractor:

Checking newly installed (NOS) Empire 600 LAC cart:

Cartridge Mounting Guide: (per spec sheet mounting is 50mm from headshell washer to stylus tip).

The illustration above is SME standard headshell w/ fixed mounting hole.
In the case of extended stylus & mounting hole like 600LAC cart,
slotted type is very useful to get the correct distance.

Thanks for looking ...

Oldboyracer · « **Reply #3504 on:** Mar 07, 2015 at 09:28 AM »

Quote from: audiojunkie on Mar 07, 2015 at 03:21 AM

SME 3009 S2 improved Removable Headshell
Custom Standard Tools . . .

Mounting Distance Guide: (215.4mm & 17.8 mm overhang)

Cartridge Alignment Protractor:

Checking newly installed (NOS) Empire 600 LAC cart:

Cartridge Mounting Guide: (per spec sheet mounting is 50mm from headshell washer to stylus tip).

The illustration above is SME standard headshell w/ fixed mounting hole.
In the case of extended stylus & mounting hole like 600LAC cart,
slotted type is very useful to get the correct distance.

Thanks for looking ...

Looks like you're keeping busy audiojunkie

redstarrising · « **Reply #3505 on:** Mar 07, 2015 at 10:30 AM »

nice work brother

, pede bang pagawa ng at least 310mm na arm length naman

audiojunkie · « **Reply #3506 on:** Mar 07, 2015 at 11:06 AM »

Quote from: Oldboyracer on Mar 07, 2015 at 09:28 AM

Looks like you're keeping busy audiojunkie

Those tools are available commercially OBR but it's more personalized to DIY.
As my motto... "Why Buy if You can DIY" ....

audiojunkie · « **Reply #3507 on:** Mar 07, 2015 at 11:09 AM »

Quote from: redstarrising on Mar 07, 2015 at 10:30 AM

nice work brother , pede bang pagawa ng at least 310mm na arm length naman

Thanks bro... .no problem brader... Anong spicific tone arm ba? One fits all...

redstarrising · « **Reply #3508 on:** Mar 07, 2015 at 06:03 PM »

Quote from: audiojunkie on Mar 07, 2015 at 11:09 AM

Thanks bro... .no problem brader... Anong spicific tone arm ba? One fits all...

nagpaplano pa lang gumawa either wood or aluminium tube arm na straight then 17degree angle parang schiick hehe

then universal yun headshell

audiojunkie · « **Reply #3509 on:** Mar 07, 2015 at 06:25 PM »

Quote from: redstarrising on Mar 07, 2015 at 06:03 PM

nagpaplano pa lang gumawa either wood or aluminium tube arm na straight then 17degree angle parang schiick hehe then universal yun headshell

Plan also to DIY straight arm wand pero gamitin ko base/pivot galing sa technics sl-1200 TT discarded by efren. Antay ko na lang mapasakamay ko....