Topic: A-AUDIO Speaker Creations!!!

[diy_master]

New finish! 6.5 inc Coax!

[endrik35]

Ganda ng finish niyang coax Sir Anthony! Regards daw sabe ni Dr. Koko Roura! Up to now daw, buo pa yung home theatre speakers na ginawa mo for him 4-5 years ago! A testament sa build quality and workmanship of your speakers!
Dennis(Dencio), mula ng ma treat ni Tony(trodt93) yung music room ko, these 2.5 clones shines even brighter!!!

[zekiber2]

sir anong klaseng treatment? care to elaborate hehe? 

ngrr... konting tiis pa.. natatakam ako sa mga photos hehe

[endrik35]

Sir Zekiber, mild treatment lang, acoustic panels using rockwool. No space for bass traps. . .

[macdon]

Doc gandang ad/endorsement to para dun sa FS item ni kagawad Macdon! These are really nice sounding speakers lalo na pag nakikinig ka habang nakaupo sa massage chair  .

Oo nga Doc, tama si sir Dencio - maraming salamat po 

If not only for the high sensitivity speaker requirement of my SET amps, I would've kept the 2.5

[diy_master]

Ganda ng finish niyang coax Sir Anthony! Regards daw sabe ni Dr. Koko Roura! Up to now daw, buo pa yung home theatre speakers na ginawa mo for him 4-5 years ago! A testament sa build quality and workmanship of your speakers!
Dennis(Dencio), mula ng ma treat ni Tony(trodt93) yung music room ko, these 2.5 clones shines even brighter!!!

thank you for the testimony! hehe 

[markcrenz]

master re D2 clones ulit. i modelled the box and the software showed that it is tuned at a relatively high 54 hz with the 1-3/4" x 3" port. i figured i can get lower bass and also get rid of the slight midbass boom if i move the box tuning down to 41 hz by changing it to a 6" port. my concern is baka masira ang box pag tinanggal ang port. nakaglue ba ang yun o force fit lang? please advise. thanks.

[oscar2003]

sir Anthony,

Noob question lang, anong pgkakaiba sa performance ng BS 6.5 coax vs FS 6.5 coax?

Sama mo na rin price sir. tia

[diy_master]

master re D2 clones ulit. i modelled the box and the software showed that it is tuned at a relatively high 54 hz with the 1-3/4" x 3" port. i figured i can get lower bass and also get rid of the slight midbass boom if i move the box tuning down to 41 hz by changing it to a 6" port. my concern is baka masira ang box pag tinanggal ang port. nakaglue ba ang yun o force fit lang? please advise. thanks.

naka glue lang yan. ok lang pwede tanggalin. ty

[markcrenz]

naka glue lang yan. ok lang pwede tanggalin. ty

thanks master, but fearing i might ruin the D2 clones' beautiful finish i just opted to glue an extension port inside. i also polyfilled the box, with each box getting half of the fiberfill from an old pillow. nawala yung occasional boom ng male voice and the bass guitars sounded clearer. the midrange also improved (from the fiberfill breaking up the back waves?). try ko rin sa 1sc clones. i recommend this tweak to other proac clone owners.   

[ianmorales]

sir ilang inches po yung subs na yan? and how much?

thanks!

Anthony, pa pm naman price and specs nito. at if possible yung color nya pang Proac.  Thanks!

[diy_master]

Anthony, pa pm naman price and specs nito. at if possible yung color nya pang Proac.  Thanks!

Sir, pm sent. ty!

[nerveblocker]

Ganda ng finish niyang coax Sir Anthony! Regards daw sabe ni Dr. Koko Roura! Up to now daw, buo pa yung home theatre speakers na ginawa mo for him 4-5 years ago! A testament sa build quality and workmanship of your speakers!
Dennis(Dencio), mula ng ma treat ni Tony(trodt93) yung music room ko, these 2.5 clones shines even brighter!!!

Aba kung sa tibay nalang ng speakers ni Anthony, one of his 1st creations nandito parin sakin and the sound quality gets even better.  Nabasa lang ng tumulo ng bubong ko pero ayos na ayos parin!

[endrik35]

Doc Mel, ganda nung speakers mo dun sa unang pic! Akin na lang yan! Abot mo lang kay Cristy sa 2nd floor opd ng LPDH! Many Thanks! he he he

[endrik35]

Still related sa Proac 2.5 clones, per request of Brader Cal, Here is the pic of the rubber na binaklas ko lang sa mga empty IV bottles sa ospital tapos inilagay ko sa ilalim ng spike shoes. maganda tong suhestiyon mo brader Cal, mas gumanda tunog nung Proac! Many thanks!

[nerveblocker]

Doc Mel, ganda nung speakers mo dun sa unang pic! Akin na lang yan! Abot mo lang kay Cristy sa 2nd floor opd ng LPDH! Many Thanks! he he he

Uy Doc Endrik!  Yun ang Usher clone ni Anthony.  May crack na nga ang box dahil sa tulo pero pagdating sa tunog....  Bigay ko sayo?

[dok]

nice spikes sir funk, may i ask where you got them? tenks!

[jeromexnz]

I bought from sir anthony last Jan 30 delivered agad ng Jan 31 ng gabi!
Center - Tablette series
Front - Pro-ac clone (scan speak) FT
Rear - Tablette FT
and partnered it with an Onkyo 307
sounds really fantastic!!!!!
up for you Anthony!

PM mo ako for some pictures of your 10" subs. both sealed and ported and also the price.

Excellent products and excellent service!

Thanks! 

Jerome

[endrik35]

@dok, kindly contact Tamy913 for the spikes! Or you can use macdon's isolation cones which is much cheaper! Php800.00 for 2 speakers na. Doc Mel, panay naman lagare mo sa OR, saka sabi mo narin, sira na yung baffle dahil sa ulan. . .I know na lalaki ang puso mo sa kaligayahan pag dinonate mo yang lumang Usher clone mo sa iyong kaibigan at colleague! Siguradong alaga yan sa akin! Or swap ko na lang with my Boston acoustics 6 1/2 coaxial speakers if you like Mel. . .

[John E.]

New finish! 6.5 inc Coax!

galing! pang limited ed.

[TinkerTailor]

ito sana sir anthony kung pwedeng iclone... :

orion speakers of Siegfried Linkwitz







here's a link to the site
http://www.linkwitzlab.com/orion_challenge.htm

baka meron dyan meron nito para ma dissect ni sir anthony at malaman ang mga sikreto.

[Stark3]

ito sana sir anthony kung pwedeng iclone... :

orion speakers of Siegfried Linkwitz







here's a link to the site
http://www.linkwitzlab.com/orion_challenge.htm

baka meron dyan meron nito para ma dissect ni sir anthony at malaman ang mga sikreto.

Aba aba aba ... ayos tignan a! Tweeter and mids na naka open baffle, woofers na naka isobaric... Kamusta kaya ang tunog nito?

Kung indi mo pa nga lang nasubukan, i recommend na i-audition mo yung coax line ni sir Anthony ... baka makalimutan mo for a while ang speaks na ito. ^^

[JoeyGS]

There are tons of information in the web regarding the Orions.  From what I know the diy info is in the net and a lot of diyers already have made clones.  Magandang challenge ito para kay Anthony if properly researched and implemented.

[yygoob]

sir diy master  pls pm naman prices ng coax...and san po pwede audition..thanks

[TinkerTailor]

you're right at that sir Joey.

the reputed 3D sound of these speakers is what has me salivating    and hoping that with the talent of sir anthony this masterpiece or its close approximation might someday grace the humble abodes of poor audiophiles like me.

[diy_master]

ito sana sir anthony kung pwedeng iclone... :

orion speakers of Siegfried Linkwitz







here's a link to the site
http://www.linkwitzlab.com/orion_challenge.htm

baka meron dyan meron nito para ma dissect ni sir anthony at malaman ang mga sikreto.

actually sir nakasalang nayan 1 pair for my personal use.

[macdon]

actually sir nakasalang nayan 1 pair for my personal use.

hahahahahaha - wala ako masabi pre

Pero, sa ngayon - maraming salamat dito



Ang bangis! 

[Onkyo606]

actually sir nakasalang nayan 1 pair for my personal use.

sir anthony ikaw ba ang may ari ng BDO(Banco De Oro)??

kase, "YOU FIND WAYS" palagi sa kahit anong speakers eh

[coldbloodedneo]

sir, i am planning to buy this dai-ichi speakers na pang karaoke. di ko na maalala model, pero it is a 300 watts speaker costing 5500/pair. may marerecomend ka bang diy na speaker but maybe cheaper than this? if yes, how much will it cost?

[Stark3]

actually sir nakasalang nayan 1 pair for my personal use.

Nakaw... Nakakatakot ito a ... Kailangan makatagal na muna sa akin mga coax bago ako dumaan sa inyo sir A, baka mamaya e mahatak na naman ako.