PinoyDVD: The Pinoy Digital Video & Devices Community
Home Theater => Audio => Amplifier => Topic started by: turismo1997 on Oct 26, 2020 at 04:38 PM
-
Hi Guys,
Need help or tips on how to pull out a stuck banana plug from yamaha amp.
Bottom row middle post.
(https://i.postimg.cc/687rvVDw/IMG-20201026-163857.jpg) (https://postimg.cc/687rvVDw)
-
Hi Guys,
Need help or tips on how to pull out a stuck banana plug from yamaha amp.
Bottom row middle post.
(https://i.postimg.cc/687rvVDw/IMG-20201026-163857.jpg) (https://postimg.cc/687rvVDw)
It might help of you can loosen the screw first then kapag exposed na kahit kainti try pulling with a long nose maybe.
-
Caps covering the post are screw types diba?
-
Tweezers sir para mas manipis
-
Screw same size as the hole in the terminal. By slowly turning it in the pulling it out w/ a plier or long nose.
-
Screw same size as the hole in the terminal. By slowly turning it in the pulling it out w/ a plier or long nose.
This method solved my dilemma before when a cheap female RCA terminal broke and left the center pin lodged in the male end of the RCA at the back of my CDP. Difference lang is I used a screw extractor (smallest size) to pull the broken center pin. You can also use a similar sized screw
-
It might help of you can loosen the screw first then kapag exposed na kahit kainti try pulling with a long nose maybe.
Thanks. Did that already pero nakabaon pa din. I was trying to see if i can unscrew the caps. Pero meron siya limit
-
Eto po yung sample nung naiwan na plug.
(https://i.postimg.cc/RWsj5HkY/IMG-20201026-220503.jpg) (https://postimg.cc/RWsj5HkY)
-
This method solved my dilemma before when a cheap female RCA terminal broke and left the center pin lodged in the male end of the RCA at the back of my CDP. Difference lang is I used a screw extractor (smallest size) to pull the broken center pin. You can also use a similar sized screw
Sir may i know the size of the extractor? Thanks
-
Thanks all for the tips. I was able to pull it using a magnet and a long nose pliers.
-
Thanks all for the tips. I was able to pull it using a magnet and a long nose pliers.
Nice, but that means hinde sya copper otherwise magnet won't work. congratz!