PinoyDVD: The Pinoy Digital Video & Devices Community
Home Theater => General => HT Picture Gallery => Topic started by: sillyputty on Mar 26, 2006 at 04:24 PM
-
HT room is almost finished...
From this...
(http://i50.photobucket.com/albums/f348/birdnipol/audio.jpg)
To this...
Screen wall
(http://i50.photobucket.com/albums/f348/birdnipol/ht3.jpg)
Rear wall
(http://i50.photobucket.com/albums/f348/birdnipol/ht6.jpg)
Right side
(http://i50.photobucket.com/albums/f348/birdnipol/ht4.jpg)
Left Side
(http://i50.photobucket.com/albums/f348/birdnipol/ht5.jpg)
DVDs...
(http://i50.photobucket.com/albums/f348/birdnipol/ht1.jpg)
Toys
(http://i50.photobucket.com/albums/f348/birdnipol/ht2.jpg)
Mostly DIY..kaya wag nyo ng pansinin kung di pantay ang pagkaka-pintura hehehe
equipment
HK AVR325
Denon 1920
Panasonic ae900, 18' throw
SVS PB-10
Wharf 9.1, 9cs, 9dfs for surround, 9sr for surroundback
100" DIY screen using BOC
sabre rack
28" speaker stand
audio connections
ixos speaker cable for front L and R, generic 12# for others
quantum interconnects
video connections
13m hdmi cable
13m component cable
13m composite cable
To Dos...
install aircon
Paint the pvc mouldings
re-upholster the sofa bed or get a new one ;D
bean bags
side table
acoustic room treatments
screen masking for 1.78 and 2.35 ARs
screen caps to follow...
-
NICELY DONE SIR! nice gear also! :D love your DIY screen, ganda ng pagkakastrech! :D ganda din ng black front wall... Congrats congrats! were did you got your sub sir?:D
-
Nice one bro! Another PJ clubber! ;D
-
nice dude.. its chillin. erbee na lang at mani oks na... 8) gulaman...
-
sir, details naman sa DIY PJ screen....great set-up you got there!!!! congrats!! post ka rin sa panny ae900 thread..... ;D ;D
-
thanks po...
got the sub from US...pinaship ko sa tita ko tapos balikbayan box papunta dito.
pero nung inorder pa lang e paina-convert na namin to 220.
regarding the diy screen..check the diy screen section in the avsforum. daming links dun kung paano gumawa ng screen. may instructions din kung paano mo ita-tack yung screen sa frame. total gastos ko e less than 800 pesos, 200 sa frame and less than 600 sa boc ;D
about the panny..nung nov pa dapat ako kumuha. may less 10% stub pa ako kasi umattend ako ng launch sa singapore. ang problema e di pa naayos yung room. late feb lang dumating yung karpentero kaya lately lang nasimulan. tsaka mahirap bumili ng ganun kamahal na equipment abroad tapos wala kang warranty dito. kung mga 5-10k lang ang diff e dito na ako bibili para lang covered ng warranty.
-
uy pre... congrats sa setup.. ang ganda.. pag-nauwi ako bisitahin kita pre ha.. d tayo man lang nagkita dito bago ka bumalik.. ;) ;D daming MO ng SVS sub dito a.. mas mura pa rin bilin sa tate? :)
-
uy pre... congrats sa setup.. ang ganda.. pag-nauwi ako bisitahin kita pre ha.. d tayo man lang nagkita dito bago ka bumalik.. ;) ;D daming MO ng SVS sub dito a.. mas mura pa rin bilin sa tate? :)
oo ba. May balak ka pa bang umuwi ng pinas?? ;D
Mas mura sa MO kung dyan mo ipapadala, mas madami pang freebies. Aabot ng mga s$950 yung pb10 pag sa MO. Ang problema ko kasi e dito dapat sa pinas ipadala. Bukod sa dagdag shipping e hassle pa sa kaibigan ko. Kung door-to-door shipping from svs e aabot ng US$750. Nung pinadala ko sa tita ko gumastos ako ng US$600, nakapagsingit pa ng chocolates etc para sa aming magpipinsan hehehe
Sa MO e tshirt n cap ata yung libre. pag direct order e ballpen lang. :-\
-
para sa mga interesado sa DIY screen...ito po yung DIY Screen section ng avsforum..
http://www.avsforum.com/avs-vb/forumdisplay.php?f=110
DIY screen FAQ
http://www.avsforum.com/avs-vb/showthread.php?t=646534
ito yung sinunod kong instructions sa pag stapler ng boc sa frame.
http://www.eldamar.net/house/ht/screenHowTo.html
gusto ko sana subukan yung mga board na binabanggit sa forum kaso wala akong makitang available dito o kung ano man yung pangalan ng equivalent nya.
kung mag-mix naman ng pintura, di ko rin makita yung binabanggit nilang brand ng paint. tsaka wala rin akong compressor. di kasi ako magaling mag-roll hehehe
-
oo ba. May balak ka pa bang umuwi ng pinas?? ;D
Mas mura sa MO kung dyan mo ipapadala, mas madami pang freebies. Aabot ng mga s$950 yung pb10 pag sa MO. Ang problema ko kasi e dito dapat sa pinas ipadala. Bukod sa dagdag shipping e hassle pa sa kaibigan ko. Kung door-to-door shipping from svs e aabot ng US$750. Nung pinadala ko sa tita ko gumastos ako ng US$600, nakapagsingit pa ng chocolates etc para sa aming magpipinsan hehehe
Sa MO e tshirt n cap ata yung libre. pag direct order e ballpen lang. :-\
a mas oks nga yung sa balikbayan box.. ;D oo naman pre, syempre uwi din sa pinas sa pasko or new year.. :) ;D kaw wala na bang balak bumalik dito?
-
Bro congrats on your new set-up,kahit DIY no problem kasi ang ganda naman lumabas esp the screen ;) And i've heard a lot of good things about SVS subs kaso wala lang dealer dito sa atin :( Matz and I are just talking the other day about getting the dealership sana ha ha ha ;D More power bro ;)
-
ganda bro!
-
Excellently done! Hanep naman sa dami at haba ng HDMI, component and composite cable!
Congrats Pare! Mabuhay!
DIY projector screen link (http://members.shaw.ca/danhanson/Theater/screen/screenproject.htm)
courtesy of Jomonds, who has always been a very helpful member.
-
sebman...medyo malabo ng bumalik...magbubusiness na si mrs e. tsaka di kaya ng sweldo ko na ipasok sa IS yung anak ko. Hirap kasi intindihin ang singlish e ;D
sa mga bumati...salamat.
regarding the svs sub dealership..sana nga makakuha kayo...ano ba req't para maging dealer? baka kailangan ng milyon-milyon na pondo e panigurado kayo lang meron nun hehehe
regarding the video cables...buti na yung nakalagay na yung cables. mahirap yung kailan kailangan mo na e tsaka ka pa magalagay ng cables, nakakapagod din.
-
Bro,
Thats one kick ass setup you got there in the making. Ive been also dreaming about a PJ based setup when we can afford to have a place of our own. Just like the others commented, your SVS sub, DENON 1920 and PANNY are the stars of your gear. I've been and still am too busy kaya di na nagmaterialize yun balak kong ma-audition and DENON 1920 mo. anyways ever since the baby arrived last 2-11-06 di ko na nagalaw ang HT and audio setup ko. Total shift ng attention and priorities. Di ko na rin naasikasong ipadala sa iyo yun titles kong icocontribute for the demo disc, sayang! I think I got several titles waiting to be viewed also but never did. I really do hope to see your setup soon, your place is just a 5 min. jeepney ride. Again CONGRATS BRO! ;D
Angelo
-
galing sir! hanep sa diy ;)
konting haplos nalang ng pintura, garantisado mas gaganda pa yan.
congrats sir!!!
-
regarding the svs sub dealership..sana nga makakuha kayo...ano ba req't para maging dealer? baka kailangan ng milyon-milyon na pondo e panigurado kayo lang meron nun hehehe
milyon-milyong pondo? WALANG PROBLEMA YAN! andyan naman si ricky eh ;D
-
Great gears! Congrats Silly! :)
-
Bro good thing you decided to go for a 16:9 screen. Great gears and great sub. Heard good things about SVS cylindrical subs,unfortunately wala pang distributor dito sa atin. Type ko yung Kill Bill na Poster ganda! ;D
-
congrats sir on your great HT set-up & some awesome gears esp. your display, source & sub......ang ganda talaga ng panny ae-900 :o 8)
-
yup..yung kill bill talaga yung target kong poster. kahit di ako nagagandahan kay uma pero gusto ko yung poster...medyo nagmatch naman siya since nagkaroon ng contrast sa dark room ko hehehe
sub..
medyo malaki sya...kahit 10" lang sya e parang 12" yung size ng box o baka mas malaki pa.
i'm quite happy with the performance. di sya yung tipong 1note bass. medyo mabilis sya for a 10" so good enough for me sa audio lalo na mahilig ako sa pop/rock. pero syempre kailangan pa ng break-in.
for ht purposes, gumagapang yung bass..di lang boom-boom. pero I think it doesn't have the kick of a velo i've heard before but it goes deeper. di ko pa gaanong napaglalaruan yung position ng sub so baka may igaganda pa.
screen.....since diy naman, may option ako na pumili ng AR. 16:9 talaga yung pinagawa ko kasi karamihan ng dvds ko e widescreen. problema ko na lang e paano imamask for 2.35
-
sub..
medyo malaki sya...kahit 10" lang sya e parang 12" yung size ng box o baka mas malaki pa.
i'm quite happy with the performance. di sya yung tipong 1note bass. medyo mabilis sya for a 10" so good enough for me sa audio lalo na mahilig ako sa pop/rock. pero syempre kailangan pa ng break-in.
for ht purposes, gumagapang yung bass..di lang boom-boom. pero I think it doesn't have the kick of a velo i've heard before but it goes deeper. di ko pa gaanong napaglalaruan yung position ng sub so baka may igaganda pa.
Kamusta bro? Ano na review mo sa sub ngayon na medyo break in na?
I was browsing the SVS website lately and maganda nga yung subs nila. Curious ako sa cylindrical subs nila.
-
NIce set-up sir. Congratz!
have read alot about those SVS subs, and sa totoo lang lahat great reviews lang. Willing to challenge other subd costing trice or more of their SVS price!
Grabe, definitely ang ganda nyan! ;D
-
sulit!! pag tinodo ko e nanginginig yung posters ko hehehe
narinig ko na kasi sya nung nasa sing ako kaya di naman blind purchase yung ginawa ko.
problema lang e walang service center dito just in case magka problema ako hehehe
tsaka wala rin gaanong connections kundi rca lang. kaya kung gusto mo gamitin ng ibang connections e di pwede.
para dun sa mga gusto makasiguro, velo for ht ;)
mas madaling bilhin, may service pa.
pero ang importante sa lahat...audition syempre.
as for the cylindrical subs...ok sya. siguro kasing lakas na din ng cht12r pero di sya diretso syo.
di ko alam yung term e. parang gumagapang.
siguro mga 16x16 lang yung laki pero medyo mataas sya.
e since pj route ako...baka tamaan yung screen...ayoko naman ng nakahiga o ilagay sa likod ;D
pag nakita mo yung box na 12in nila...grabe ang laki!!!
para sa mga interesado...may dealer ng hsu sa singapore...ok din yun. ;D
-
Congrats on your setup
-
bravo sir congrats ;D
-
silly, very nice set-up! product of hard work...i'm moving to a new apartment and i'd like to do the same as what you did...at least my weekends are booked already for the DIY set-up, hehehe!
-
as for the cylindrical subs...ok sya. siguro kasing lakas na din ng cht12r pero di sya diretso syo.
di ko alam yung term e. parang gumagapang.
siguro mga 16x16 lang yung laki pero medyo mataas sya.
e since pj route ako...baka tamaan yung screen...ayoko naman ng nakahiga o ilagay sa likod ;D
pag nakita mo yung box na 12in nila...grabe ang laki!!!
LOL, sabi nga ng isang review about the cylinder subs: The downside? Its BIG, its like R2D2 in your HT!
ROFL.
But all praises sa net about this sub.
They also have one sub with 2 12.3" woofers, yun siguro yung nakita mong malaki.
(http://www.svsound.com/products/subs/pb12plus2/angle_med.jpg)
-
They also have one sub with 2 12.3" woofers, yun siguro yung nakita mong malaki.
(http://www.svsound.com/products/subs/pb12plus2/angle_med.jpg)
Ang pogi naman nito!
-
Pogi? Eto pa:
Available in veneered finish and piano finish
(http://www.svsound.com/products/subs/pb12plus2/front_rose_med.jpg)
(http://www.svsound.com/products/subs/pb12plus2/front_piano_med.jpg)
Cylinder subs
(http://www.svsound.com/pix/g_cylinder_sub_blue.jpg)
Its 16" diameter (Velo CHT12r is 15" wide only), height of at least 31"- 46" tall depending on the model!
Ang ganda ng 2 subs na ganito malapit sa floorstanders mo on a big room!
Bagay sa wide room ni Munskie!!! >:D
-
Ang ganda ng 2 subs na ganito malapit sa floorstanders mo on a big room!
Bagay sa wide room ni Munskie!!! >:D
O yan matt, pagbigyan kita.....ang ganda at ang laki ng SVS sub ko....mataas pa sa 603s... ;D ;D ;D
(http://i45.photobucket.com/albums/f82/marlai/svs.jpg)
sir silly, congrats po uli sa set-up...
sensya na, napost ko dito....pinagbigyan ko lang si matt...heheheh...just playin guys.. :) :)
-
O yan matt, pagbigyan kita.....ang ganda at ang laki ng SVS sub ko....mataas pa sa 603s... ;D ;D ;D
(http://i45.photobucket.com/albums/f82/marlai/svs.jpg)
sir silly, congrats po uli sa set-up...
sensya na, napost ko dito....pinagbigyan ko lang si matt...heheheh...just playin guys.. :) :)
LOL, ayus sa photoshop skillz! Pero I think maganda sya sa sides ng floorstanders mo, doon sa part na di na kita sa pics. May 31" version naman eh.
-
dapat 2...parehas sa gilid para mukhang bass trap...
pero ang totoo e bass source hehehe
rosewood yung nakita ko....poging-pogi.
yung cylindical e di ko gusto yung cover na ginamit. parang industrial carpet hehehe
salamat po sa mga bumati...
alam naman natin na medyo madugo yung bisyo nating ito...
kaya sa mga nagbabalak...audition lang...tapos unti-untiin nyo na muna ang pagbuo...mas makakamura kayo
-
Great work sir. Hindi sya halatang DIY lang. Congrats. ;D :)
-
O yan matt, pagbigyan kita.....ang ganda at ang laki ng SVS sub ko....mataas pa sa 603s... ;D ;D ;D
(http://i45.photobucket.com/albums/f82/marlai/svs.jpg)
sir silly, congrats po uli sa set-up...
sensya na, napost ko dito....pinagbigyan ko lang si matt...heheheh...just playin guys.. :) :)
may talent ka pala sa photoshop ;D tama ba ang scale nyan? parang drum ng tubig sa laki :O