PinoyDVD: The Pinoy Digital Video & Devices Community
Home Theater => Sources => NMTs => Topic started by: mikel_belat on Aug 05, 2008 at 02:53 PM
-
Hi,
I apologize for starting a new thread pero Im not sure kung meron sa inyong
merong PopCorn Hour na nakaSmart Bro.
I have been posting sa iba't ibang forums asking this question and mejo minamalas
ata ako and walang nakakasagot. Kase I have my PCH unit for almost a month now
and hinde pa den ako makaconnect sa internet. I am using it now only as an "upgraded"
media player pero I wanted the PCH primarily for the torrent downloading capability.
PLease help naman po. Nakakafrustrate den kse hinde ko mapagana and kahet ung pinagbilhan
ko ay hinde ren nya sure ang setup for SmartBro. Most of the issues I can see in the forums are
concerns after connection na. Wala talagang nagexplain pano nakaconnect sa internet.
Ang setup na ginawa ko lang naman is yung SmartBro network cable imbes na sa PC ko kinabet e
kinabet ko sya sa PCH. Walang modem or router involved. Sa firmware update.. sabe hinde daw ako
nakaconnect sa internet. So tinry ko baguhen yung settings ng IP and DNS copying the values from
my PC. Ngayon naman ang lumalabas sa TV is connecting to Smartbro homepage... if it does not
display.. click here.. kaso kahet anong pindot ko sa remote wala naman nangyayare. Tinry ko den sya
antayen baka magload overnight.. wala den nangyare. ???
Malamang talaga me mali akong ginagawa e. Hayyy... sana meron pong makatulong. mejo mahal den
tong unit and kung media player ko lang sya magagamet e para na lang den syang yung hard disk
player ko or yung dvd player ko na me usb slot. :(
Marameng Salamat po! :)
-
I guess you have to connect your internet connection to a router first, then from the router to your PCH.
-
Hi,
Ganun po ba? Pero how come I dont need/use a router when connecting to my PC.
Does this mean po ba na requirement ang router when purchasing a PCH?
Thanks :)
-
I think hindi naman siya requirement,
kaya lang most of the modems we use nowadays kasi ay halos single port lang,
kaya gumagamit pa tayo ng router para magamit din natin ang ibang utility natin
in connecting to the web. If you're modem has more than 1 port, then
you don't need to get a router...
let's wait also for the opinion ng mga expert dito and persons who bought the PCH...
Good day,...
ABC
-
Hi,
Ganun po ba? Pero how come I dont need/use a router when connecting to my PC.
Does this mean po ba na requirement ang router when purchasing a PCH?
Thanks :)
Smartbro is wireless ba? Because PCH cannot handle wireless signal yata..
-
Hi ABC,
Thanks sa info. My understanding po kase sa SmartBro connection ko
is walang modem, sorry kung mali ito, pero kase from the Antenna/Canopy
na asa bubong namen e direct yung cable nya na nakakabit sa lancard ng
PC ko. Kaya I was so excited sa PCH kase akala ko ikakabit lang to basta basta
dun sa network port nya.
Thanks po ulet sana nga may makapagsabe na for sure pag bumile ako ng router
e makakaconnect nako sa internet para hinde masayang yung purchase :)
or... baka talaga kase me mali akong ginagawa or config lang naman.. :-[
Oreoshake,
SmartBro is wifi yes... so hinde po ppwede?
-
This is what I got sa Popcorn website:
How should I configure the network for my NMT?
Under current firmware releases you really should only use "manual IP" mode and not "automatic". There is a bug where the NMT doesn't correctly store your network's supplied DNS (domain name server) IP addresses and so the internet services (Media service portal, saya TV, youtube, etc.) will probably NOT work correctly if you don't enter your own "manual IP" settings. From main screen choose setup -> network -> mode...change to "manual IP"...click on [save].
Next choose [configure IP] button and check the IP numbers in each field. For the two DNS fields you should use either the DNS IPs supplied by your ISP (Internet service provider) or the internal IP address of your home router.
What type of network sharing does the NMT built-in NAS support?
SMB, FTP, NFS
-
Hi ABC,
Thanks sa info. My understanding po kase sa SmartBro connection ko
is walang modem, sorry kung mali ito, pero kase from the Antenna/Canopy
na asa bubong namen e direct yung cable nya na nakakabit sa lancard ng
PC ko. Kaya I was so excited sa PCH kase akala ko ikakabit lang to basta basta
dun sa network port nya.
Thanks po ulet sana nga may makapagsabe na for sure pag bumile ako ng router
e makakaconnect nako sa internet para hinde masayang yung purchase :)
or... baka talaga kase me mali akong ginagawa or config lang naman.. :-[
Oreoshake,
SmartBro is wifi yes... so hinde po ppwede?
from what I read, hindi sya capable of accepting wireless signals..
-
naku ansaklap naman :'(
regarding sa manual ip.. i have done this and copied the values from my PC.
ginaya ko yung IP and yung DNS kaya lumabas yung smartbro homepage
na redirecting something yung lumalabas and nakastuck lang sa ganun.
Ano po kaya ibig sabihen netong review from pcworld..
http://www.pcworld.com/article/146264/popcorn_hour_a100_media_streamer.html
===============================================================================
It has a 100-megabytes-per-second ethernet port, but no wireless networking. You could attach an ethernet-to-Wi-Fi bridge, but performance will likely not be satisfactory unless you have a strong 802.11n network--HD video is too demanding for regular Wi-Fi.
===============================================================================
Hinde po kaya ang sinasabe dito is young streaming capability ng PCH and hinde yung torrent downloading
nya?
Thanks ulet.
-
sir, reason ba't di po kayo makakonect sa internet using your PCH is because yung MAC address na naka register sa amartbro portal is yung MAC address nung ethernet (network) card nung pc nyo. If you have another (extra) pc try nyo connect yung smartbro internet cable to that pc and it will prompt you (once you open IE) to login using your smartbro account (this process will re-register the new MAC address). Now, try nyo ibalik yung smartbro internet sa 1st pc nyo and you will be prompt again to enter your username & password. Best thing to do is to use a router which has a MAC clone feature para you can both use your pc & PCh at the same time.
-
Hi jaklord,
Sir thanks, yun nga den ang mejo ineexpect ko when I connected the cable to the PCH.
Kase whenever i use another pc and connect the internet cable e nagpapalogin
ulet ang smartbro gamet ang account ko... then its the same thing pag ibinalek
ko na sa orig pc. Yun nga lang sa PCH e hinde tumutuloy dun sa page na un..
smartbro homepage redirecting lang ang lumalabas and yung me ... click here.. na
kapag hinde daw nagautomatically load ang page.
Regarding sa MAC address.. di po ba yung second PC will have a different MAC Address
as well kaya kinailangan magre-register sa smartbro portal? Im just thinking na since
iba den yung MAC Address ng PCH.. it will just do the same pero yun nga po... stuck lang sya
sa redirecting page.
Im just not sure as well kung makakaconnect yung PCH ko with a router if ganito ang case.
-
yes sir unique po yung MAC address for each network device, I don't have a PCH kaya di ko rin ma-test yung PCH-router combo, pero palagay ko gagana yan kasi once na na configure mo ng tama yung router kahit 10 pc pa ikakabit mo (with switch hub) magkakaroon lahat ng internet yun. Just to play safe, kung may mahihiraman ka sana muna ng router for testing....By the way smartbro and pldtdsl pala gamit ko sa bahay using dual wan router.
-
Ayus!
Sana nga gumana yung router.. Hiram muna ko dito sa officemate ko and Ill try
to configure sa bahay. (sana marunong ako kse wala talaga ako alam dito) :-\
Thanks ulet mga sir. If ever di pa den to gumana hayyy.. malamang resell to.
-
Oreoshake,
SmartBro is wifi yes... so hinde po ppwede?
thats a common perception with smartbro, smart bro is not wifi, its wireless broadband, but you still connect your pc through lan cable. kaya hindi sya wireless connection, wireless sya getting signal from outside to your modem which is in your house. parang dream satellite yan at skycable, one gets signal through air, one through cable but you still need cable to connect to your tv.
while wifi, you have no connection between pc and modem, thats when you need a wifi router to create a wireless fidelity (wifi) signal for your pc's wifi chip to recognize and use.
i think mas tama ang suggestion ni sir jaklord, nasa settings lang yan.
btw, thats why smart relaunch the service from smart wifi to smart bro, nalito kasi mga tao nun. ;D
-
uy tnx sir...
nung tinanong nga ni oreoshake kung wireless ang smartbro.. not sure ako sa isasagot ko
kse alam ko wireless pero merong cable na nakaconnect sa lancard ko e so wired den hehe..
thanks sa info at least alam ko na ngayon...
Sana lang tlaga gumana yung router na sinuggest nyo lahat :)
-
Smartbro rin ang connection ng laptop ko.
Nung nilipat ko sa desktop yung connection ay automatic sa smartbro lagi yung website
kapag click ko ng interner explorer.
And then kailagan fill up pan yung mga mga account number ata dun.
One time lang naman yun. Siguro pag na detect ng smart bro na iba yung pc or lets say PCH gamit mo
ay dedirect ka niya sa website ng smartbro. Ngayon gumamit na ako ng router. Ok naman.
FYI,
sana makatulong.
-
tnx ulet taxx and saint,
Just borrowed my friend's router.. Linksys wrt54g ver7.0
sana mapagana ko sya later pag uwe ko..
Sa ngayon kase although nakikita naman ng PCH yung smartbro homepage, hinde sya nagtutuloy..
redirecting lang sya habangbuhay and walang page to type in the account name and password..
yun ang major concern ko... sana with this router e lumabas na yung actual page
for me to re-register my account sa smartbro.
-
i'm under the impression that smartbro these days uses 3g, instead of wifi which they used before.
in any case, seeing that i've never had to deal with smartbro before, i'm not sure how you connect. i'm thikning, just like most of our dsl accounts, it uses pppoe, meaning, you'd need to 'dial up' to their servers for authentication purposes. as such, i don't think the pch can handle this.
now, you should have several alternatives:
- use a router, though i don't think the smartbro usb device can be used with any normal router
- use a 3g router, if your smart bro comes with a sim, you can probably remove it and plug it into the router and set it up that way
if you want, come over to our shop and we'll have a go at it. i'm personally curious to see how the whole thing works. good luck with the router you have right now, if it doesn't work, let us all know and we'll take a shot at it.
tnx ulet taxx and saint,
Just borrowed my friend's router.. Linksys wrt54g ver7.0
sana mapagana ko sya later pag uwe ko..
Sa ngayon kase although nakikita naman ng PCH yung smartbro homepage, hinde sya nagtutuloy..
redirecting lang sya habangbuhay and walang page to type in the account name and password..
yun ang major concern ko... sana with this router e lumabas na yung actual page
for me to re-register my account sa smartbro.
-
Hi,
Im really disappointed with myself and with the PCH.
Hinde sya pang network idiot na tulad ko.. lalo pa at naka smart bro ako and
too bad parang wala ng ibang naka smart bro na merong PCH.
I used the router although i don't really know how to use it.
Sabe lang ng friend ko connect ko lang then..
1. Go to 192.168.1.1 sa Iexplorer
2. Sa basic setup pilien ko lang yung DCHP on
I did this pero di nmn tlaga gumana yung internet ko so kinalikot ko na.
1. After DCHP is turned on.. pinalitan ko yung IP address to 192.168.241.1
2. Yung starting Local IP .. i changed to 192.168.241.2
3. Sa DNS nilagay ko yung 121.1.3.208, 121.1.3.199, 203.84.191.216 which are the default na nakita ko
sa network ko before ko ikabit yung router.
4. Yung subnet hinde ppwede baguhen manually.. me listbox lang and pinile ko 255.255.255.0...
wala yung 255.255.224.0 na initial value ng subnet ko before ko ikabit yung router.
Di pa ren yan gumana..
1. I went to MAC Clone Tabpage tapos inenable ko.. tapos nilagay ko yung MAC Address ng PC ko.
Ayan gumana na... nagkaron na ko ng internet. However ng tinangal ko na yung router-to-PC na cable
and ikinabit ko ito sa PCH... wala den nangyare.
1. I changed PCH IP to 192.168.241.3
2. Changed the DNS to 121.1.3.208, 121.1.3.199 (2 lang kse ppwede ilagay e)
3. Sa Subnet ang nilagay ko is 255.255.224.0
4. Sa gateway is 192.168.224.1
Kopya ko lang yang mga DNS, Subnet and Gateway values na yan sa orig na PC data ko before ikabet
ang router. Wala talaga. Hinde makaconnect sa internet ang PCH.
NGayon I tried naman na ikabet ng sabay yung PCH and PC sa router following the same settings.
1. Yung PC me connection pero intermittent na.. sobrang bagal ata
2. Yung PCH no reaction. Wala talaga e hinde makaconnect.
I even tried na lang yung network connection lang ng PC to PCH.. di ko den napagana yun gamet
myIHome. Kakainis talaga.. Sobrang tanga ko ata para hinde mapagana pero sa tingen ko hinde talaga
sya simple e. Nagkataon lang na magagaling yung mga taong nakapagpagana hayyyy...
-
Nga pala taxx...
I called SmartBro para huminge ng tulong for the router setup.
Ayaw ako tulungan di raw nila sinusupport ang pagsetup ng router.
Sabe ko meron nagsabe saken sa forum na tumutulong ang SmartBro with regards
sa router setup. Sabe kahet kelan daw di nila yun ginawa hehe... ansunget =p
I tried to call again baka malas lang ako sa kausap ko..
This time ang sabe nung kausap ko is magpatulong na lang daw ako sa
personal technician kase hinde nga nila sinusupport ang router setup. Basta
daw nakaconnect na sa internet ang PC e ok na yun.
Yoko na makipagtalo kase parehas den sila hinde familiar sa PCH e.
Hayy hayy hayy again...
To Gren...
Nattempt nako pumunta sa shop mo and magpatulong kaso wala ka den smartbro e di ba?
Swerte naman... Sana magkaron na dito ng Globeilnes Broadband.
-
patience lang yan...
i suggest i-download mo muna ung manual ng Linksys wrt54g ver7.0 baka makatulong
-
Hi,
Im really disappointed with myself and with the PCH.
Hinde sya pang network idiot na tulad ko.. lalo pa at naka smart bro ako and
too bad parang wala ng ibang naka smart bro na merong PCH.
I used the router although i don't really know how to use it.
Sabe lang ng friend ko connect ko lang then..
1. Go to 192.168.1.1 sa Iexplorer
2. Sa basic setup pilien ko lang yung DCHP on
I did this pero di nmn tlaga gumana yung internet ko so kinalikot ko na.
1. After DCHP is turned on.. pinalitan ko yung IP address to 192.168.241.1
2. Yung starting Local IP .. i changed to 192.168.241.2
3. Sa DNS nilagay ko yung 121.1.3.208, 121.1.3.199, 203.84.191.216 which are the default na nakita ko
sa network ko before ko ikabit yung router.
4. Yung subnet hinde ppwede baguhen manually.. me listbox lang and pinile ko 255.255.255.0...
wala yung 255.255.224.0 na initial value ng subnet ko before ko ikabit yung router.
Di pa ren yan gumana..
1. I went to MAC Clone Tabpage tapos inenable ko.. tapos nilagay ko yung MAC Address ng PC ko.
Ayan gumana na... nagkaron na ko ng internet. However ng tinangal ko na yung router-to-PC na cable
and ikinabit ko ito sa PCH... wala den nangyare.
1. I changed PCH IP to 192.168.241.3
2. Changed the DNS to 121.1.3.208, 121.1.3.199 (2 lang kse ppwede ilagay e)
3. Sa Subnet ang nilagay ko is 255.255.224.0
4. Sa gateway is 192.168.224.1
Kopya ko lang yang mga DNS, Subnet and Gateway values na yan sa orig na PC data ko before ikabet
ang router. Wala talaga. Hinde makaconnect sa internet ang PCH.
NGayon I tried naman na ikabet ng sabay yung PCH and PC sa router following the same settings.
1. Yung PC me connection pero intermittent na.. sobrang bagal ata
2. Yung PCH no reaction. Wala talaga e hinde makaconnect.
I even tried na lang yung network connection lang ng PC to PCH.. di ko den napagana yun gamet
myIHome. Kakainis talaga.. Sobrang tanga ko ata para hinde mapagana pero sa tingen ko hinde talaga
sya simple e. Nagkataon lang na magagaling yung mga taong nakapagpagana hayyyy...
Sir,
Mali lang setup mo sa router kaya di gumana, and meron ding mali sa settings ng PCH ... here's some simple steps to make it work, this is not the optimal setup however, i'll just guide you to make it work (i don't have that much time kasi tonight, medyo mas mahaba kasi steps and explanation - might not be that easy since you mentioned that you're not so tech or network savvy...later pag di ako tinatamad ;D)
1. Put everything in the default factory setup for both router and pch ...this should not be hard to do, just read the manual
2. The router usually would have 5 ports (4 for the devices and 1 for the internet) ... usually, you would connect the Smart bro to the internet port, for this case, connect the Smart bro modem to one of the device ports (not the internet port).
3. Connect your pch to the router - device port also
4. Verify that the pch is in default settings - meaning auto lahat (naka-dhcp to get the ip address)
5. if you have a PC, connect it to the router - device port also
That's it !!! you're done ...everything should be working fine
Reason for connecting to the device port instead of the internet port - the default ip address of the smart bro modem (which is basically a modem/router) is 192.168.1.1 ....same with the default of the router, hence when you connect it via the internet port - it won't work ... to make it work, you need to change ip, setup ip address range of dhcp, etc....etc....etc....hahaba masyado discussion, try mo muna ito and let me know if it works, then i guide you through the fine tuned setup
-
ooops .... another thing pala...i read in one of your post that you need to enter a username and password to connect to your smart bro ... look for this setup in your router, there should be a tab wherein you can enter the username and password ...you need to configure that also
-
ooops .... another thing pala...i read in one of your post that you need to enter a username and password to connect to your smart bro ... look for this setup in your router, there should be a tab wherein you can enter the username and password ...you need to configure that also
tama..yung smartbro ba PPPoE? if yes you need to set up sa router ng linksys under sa 192.168.1.1 then select mo PPPoE yung connection type mo den lagay mo yung username and password..
-
Hi Raptor,
Thanks for the your help pero back to redirecting page ako e.
Nga pala... The first time I connected my SmartBro cable directly to PCH
and copied the settings of my PC e ganto exactly ang lumalabas sa TV.
Welcome to the SmartBro Redirection Page
If you're not automatically redirected, please click here
Ayan.. and my prob was I cannot click the "click here" link.
I tried to use all of the buttons in the remote. I even connected a USB mouse
hehehe try lang nmn e.. kaso yun nga nadetect nya as USB keyboard so walang arrow cursor =p
I called SmartBro and ang sabe nila e talagang default na lalabas yung Redirection Page
and click here. Sabe ko baket kelangan pa me click here? hinde na lang derecho sa login page?
Di naman masagot ng taga SmartBro..
So ngayon nga I tried using the router then failed to connect then I tried using the steps
from raptor. Ayun ang galing! nakaconnect na agad ang PC... pero yung PCH..
back to redirecting page hehehe... andun pa den si click here na hinde ko maclick.
I also tried using PPPoE connection then nilagay ko dun yung username and password ko.
Reboot the PC and PCH kaso ganun pa den. Me connection ako sa PC (gamit ko ngayon)
and yung PCh e stuck sa redirection page.
If only I can click the "click here" link.... any suggestions mga sir?
Thanks Thanks ulet ng marame senyong lahat!
-
so basically log-in ang problem mo...
hindi ba kayang in-'embed' sa router yun?
-
Sorry mga sir ganito pala ang nangyare..
1. I followed raptor's steps.. Reboot PC then reboot PCH..
Successfully connected ang PC sa net pero yung PCH stucked sa redirecting page
2. Changed connection to PPPoE... setup username and password... Reboot PC then recoot PCH
Successfully connected ang PC sa net pero yung PCH.... NO CONNECTION
3. Changed back to Auto DCHP yung router... Reboot PC and reboot PCH
PC connected to net and PCH back to redirecting page...
leomar,
Dunno about the 'embedded login' pero im guessing the same thing sya sa PPPoE
na cnabe ni ert and raptor pero hinde nagwork e.
Thanks ulet!
-
Sorry mga sir ganito pala ang nangyare..
1. I followed raptor's steps.. Reboot PC then reboot PCH..
Successfully connected ang PC sa net pero yung PCH stucked sa redirecting page
2. Changed connection to PPPoE... setup username and password... Reboot PC then recoot PCH
Successfully connected ang PC sa net pero yung PCH.... NO CONNECTION
3. Changed back to Auto DCHP yung router... Reboot PC and reboot PCH
PC connected to net and PCH back to redirecting page...
leomar,
Dunno about the 'embedded login' pero im guessing the same thing sya sa PPPoE
na cnabe ni ert and raptor pero hinde nagwork e.
Thanks ulet!
sir,
what kind of router are you using? ...if you can setup your username and password on the router, you should be able to connect both your pc and pch without passing through the login page
-
Onga Sir sana wag na dumaan sa Login Page e
pero yun nga.. when I chose the PPPoE connection e
not connected sa internet yung PCH.
Router na gamet ko is Linksys wrt54g ver7.0
-
Onga Sir sana wag na dumaan sa Login Page e
pero yun nga.. when I chose the PPPoE connection e
not connected sa internet yung PCH.
Router na gamet ko is Linksys wrt54g ver7.0
sir, if you would go to the setup menu of the router, select PPPOE instead of automatic DHCP ...there is a field there to enter your user name and password ...that should do the trick
-
Yupyup sir..
When I chose the PPPoE connection.. nilagay ko den yung
username and password then reboot both PC and PCH kaso even
though my internet ako sa PC..sa PCH e no connection po.
-
Yupyup sir..
When I chose the PPPoE connection.. nilagay ko den yung
username and password then reboot both PC and PCH kaso even
though my internet ako sa PC..sa PCH e no connection po.
pagka ganon, i think sa settings nalang ng pch ang problem. hmmmm. ???
-
Hi Sir!
You could try to make the router work with the Smartbro connection first. You may look into the link below for reference or guide.
http://seoroot.com/blog/networking/setup-smartbro-smartwi-fi-with-linksys-router.html
-
Yupyup sir..
When I chose the PPPoE connection.. nilagay ko den yung
username and password then reboot both PC and PCH kaso even
though my internet ako sa PC..sa PCH e no connection po.
you just need to save changes on router, then reboot or refresh the router (not PC and PCH)
-
Hi daemon,
Tnx for the link! Galing nun ah parang gusto ko na sya kausapen
para naman maguide nya ko step by step =p
Problem is I tried na yung sinasabe nya kagabe.
1. First tinry ko yung ke raptor na connect SmartBro, PC and PCH sa router pero hinde sa internet port.
2. Nakareset ang router and PCH to default settings.
3. Sa 192.168.1.1 i enabled DHCP
4. Nakaconnect ako sa internet sa PC pero sa PCH e SmartBro redirecting Page
Then I tried the PPPoE... reboot PC and PCH... nakaconnect ako sa PC pero PCH wala..
so back to Auto DHCP lang ako.
Then kagabe tinry ko ulet yung PPPoE (with username and password) without the reboot of PC
and PCH.. nakaconnect nako sa PC and yung PCH e smartbro redirecting na naman hehehe kulet..
Pero napansin ko sa Mac Clone na hinde nareset yung pagkadisabled nun..
Naka enable sya the whole time...
Anyways, soli ko na yung router today e... Ill try and buy the same brand and model
later. WRT54G ver 7.0
Tingen ko onti na lang gagana na to e... kase no problem nako sa connection between
PC and PCH.. nakakastream nako using myIHome. Nakapaglagay na den ako ng torrent dun sa
internal HDD nung PCH kaso yun nga lang 0.0% lang the whole time yung pagdownload nya
hehehe...
Added question...
Parang based dun sa link... sa gantong setup daw e kapag patay ang PC e walang internet
connection ang PCH? tama ba yun? kse parang nabalewala naman yung energy saving feature
nung PCH kung naka-on pa den pala lage ang PC para magkaron ng internet.
-
Sir I hope this helps...
1. Puntahan nyo yung WAN settings ng router tapos set nyo sya sa DHCP mode. Hindi PPPoE ang gamit ng Smart Bro sa config ng router.
2. Next punta naman kayo sa LAN settings ng router tapos enable nyo po yung DHCP server.
3. Yung LAN settings ng PC nyo and media player kelangan naka "automatically obtain IP". Ganun din po sa DNS.
4. Connect na kayo sa internet pero make sure na yung PC ang una nyo gamitin para maipasok nyo ang username and password nyo sa
login page ng smart bro. After logging in dapat ok na din po yung media player nyo.
Once naka login na kayo, yung MAC address na ng router ang mareregister sa Smart Bro. Kaya dapat kahit na iba iba ang device na gamitin nyo basta nakakabit sya sa router, yung MAC address pa rin ng router ang magrereflect sa Smart na gamit nyo.
-
Hi daemon,
Tnx for the link! Galing nun ah parang gusto ko na sya kausapen
para naman maguide nya ko step by step =p
Problem is I tried na yung sinasabe nya kagabe.
1. First tinry ko yung ke raptor na connect SmartBro, PC and PCH sa router pero hinde sa internet port.
2. Nakareset ang router and PCH to default settings.
3. Sa 192.168.1.1 i enabled DHCP
4. Nakaconnect ako sa internet sa PC pero sa PCH e SmartBro redirecting Page
Then I tried the PPPoE... reboot PC and PCH... nakaconnect ako sa PC pero PCH wala..
so back to Auto DHCP lang ako.
Then kagabe tinry ko ulet yung PPPoE (with username and password) without the reboot of PC
and PCH.. nakaconnect nako sa PC and yung PCH e smartbro redirecting na naman hehehe kulet..
Pero napansin ko sa Mac Clone na hinde nareset yung pagkadisabled nun..
Naka enable sya the whole time...
Anyways, soli ko na yung router today e... Ill try and buy the same brand and model
later. WRT54G ver 7.0
Tingen ko onti na lang gagana na to e... kase no problem nako sa connection between
PC and PCH.. nakakastream nako using myIHome. Nakapaglagay na den ako ng torrent dun sa
internal HDD nung PCH kaso yun nga lang 0.0% lang the whole time yung pagdownload nya
hehehe...
Added question...
Parang based dun sa link... sa gantong setup daw e kapag patay ang PC e walang internet
connection ang PCH? tama ba yun? kse parang nabalewala naman yung energy saving feature
nung PCH kung naka-on pa den pala lage ang PC para magkaron ng internet.
i'm glad ok na rin yung setup mo sa router :) baka wala lang nagseseed kaya 0.0% try mo iwan ng kunti magkakaroon din yan..
-
Sir I hope this helps...
1. Puntahan nyo yung WAN settings ng router tapos set nyo sya sa DHCP mode. Hindi PPPoE ang gamit ng Smart Bro sa config ng router.
2. Next punta naman kayo sa LAN settings ng router tapos enable nyo po yung DHCP server.
3. Yung LAN settings ng PC nyo and media player kelangan naka "automatically obtain IP". Ganun din po sa DNS.
4. Connect na kayo sa internet pero make sure na yung PC ang una nyo gamitin para maipasok nyo ang username and password nyo sa
login page ng smart bro. After logging in dapat ok na din po yung media player nyo.
Once naka login na kayo, yung MAC address na ng router ang mareregister sa Smart Bro. Kaya dapat kahit na iba iba ang device na gamitin nyo basta nakakabit sya sa router, yung MAC address pa rin ng router ang magrereflect sa Smart na gamit nyo.
Hmmmm... cge sir Ill try that sequence baka sakali.
Pero kelangan ko na ulet ng router kse sinoli ko na yung nahiram ko e hehe.
BTW... "Enable DHCP sa LAN Settings ng router".... Pano ito sir?
Same ba sya sa punta sa properties ng TCP/IP, then click Advanced button.. then sa IP Settings tab e
nakalagay DHCP Enabled?
Thanks :)
-
i'm glad ok na rin yung setup mo sa router :) baka wala lang nagseseed kaya 0.0% try mo iwan ng kunti magkakaroon din yan..
Naku sir... Hinde po talaga ata sya magddownload kase nga not connected naman talaga
sa internet yung PCH.
-
@TS
Napagana mo na ba sir?
-
Try mo gumamit ng dalawang pc. Kpg nka connect kana sa internet sa dalawang pc mo using your router na nka dynamic, unplug mo yung isang connection ng isang pc then i-connect mo sa PCH mo.