PinoyDVD: The Pinoy Digital Video & Devices Community
Home Theater => Displays => Projection TV => Topic started by: Verbl Kint on Jan 10, 2012 at 10:57 AM
-
(http://www.optomausa.com/webresources/images/gallery/large_a67ca9068d454804bfc9137eca60b56f.jpg)
Key Features of HD33:
- Bright at 1800 ANSI lumens and contrast ratio of 4000:1
- True 1080p 2D/3D for Blu-ray and gaming consoles
- Up to 300” screen size for large group viewing
- Backlit IR remote control
- Features Texas Instruments 1080p DLP® chipset
- PureMotion image processing ensures smooth, judder-free images
Currently $1,499 online. Not bad, considering the features are on par with far more expensive projectors.
Will this be available in the Philippines?
-
Great features especially for table mounted PJs. Kaya lang kapag ceiling mounted, parang mahirap i-utilize.
just my dos centavoses. :D
-
Great features especially for table mounted PJs. Kaya lang kapag ceiling mounted, parang mahirap i-utilize.
just my dos centavoses. :D
Bakit po mahirap? Am interested sana in this projector. My plan is to ceiling or rear wall mount.
-
Mahirap iset up pag nakawall mount kasi kailangan exact ung position nya. kung may lens shift madali lang.
-
Bakit po mahirap? Am interested sana in this projector. My plan is to ceiling or rear wall mount.
Mahirap i-utilize ang mga features niya kapag ceiling mounted kasi paano mo ikakabit yun mga peripherals niya kapag nasa ceiling yun projector.
-
Mahirap i-utilize ang mga features niya kapag ceiling mounted kasi paano mo ikakabit yun mga peripherals niya kapag nasa ceiling yun projector.
Pwede naman cguro. Just plan out the wiring system.
-
Pwede naman cguro. Just plan out the wiring system.
Yup of course. pwede naman. Isabay na sa pag-install ng wiring yun mga connectors nun different peripherals.
-
Mahirap iset up pag nakawall mount kasi kailangan exact ung position nya. kung may lens shift madali lang.
Too bad at walang lens shift feature. Kaya torn din ako between the Optoma HD33 and the Epson 8350 (non-3D but with lens shift). Anyway, this is my HT room. Maliit lang siya (3.56m ang front to rear wall distance). Ceiling height is 9 ft. Would I have a problem mounting it sa rear wall (projector is upside down)? The rear cabinet can easily be removed or repositioned to make way for the projector. The blinds will also need to be replaced with heavy drapes to lessen ambient light (but we always watch movies at night so that it may not be an issue). I plan to use a 100" screen. A single HDMI cable will run from the receiver which is on a rack at the front wall. Initially, I was thinking of a double set-up (PJ and plasma), but if i do that, I will have to use a pull down or motorized screen in front of the plasma, which will decrease the rear wall to screen distance.
(http://i364.photobucket.com/albums/oo88/joeymd/JRC_3472_3_4_5_6_fused.jpg)
Chart taken from Optoma HD33 manual
(http://i364.photobucket.com/albums/oo88/joeymd/OptomaChart.png)
-
True 1080p 2D/3D for Blu-ray and gaming consoles
does this mean di na niya kelangan ng 3d coverter box?
-
Too bad at walang lens shift feature. Kaya torn din ako between the Optoma HD33 and the Epson 8350 (non-3D but with lens shift). Anyway, this is my HT room. Maliit lang siya (3.56m ang front to rear wall distance). Ceiling height is 9 ft. Would I have a problem mounting it sa rear wall (projector is upside down)? The rear cabinet can easily be removed or repositioned to make way for the projector. The blinds will also need to be replaced with heavy drapes to lessen ambient light (but we always watch movies at night so that it may not be an issue). I plan to use a 100" screen. A single HDMI cable will run from the receiver which is on a rack at the front wall. Initially, I was thinking of a double set-up (PJ and plasma), but if i do that, I will have to use a pull down or motorized screen in front of the plasma, which will decrease the rear wall to screen distance.
no. mine is wall mounted too using a DIY bracket. one advantage of wall mounting the PJ imho is that it is less prone to vibration since walls are usually sturdier than ceilings.
-
nice room!
plasma may take 4" of space sa front, and the loss of size for the motorized PJ screen to the PJ, you may need to check if acceptable. pero parang kaya ang 100" sa 3.56m, esp. for projectors an short throw.
HTH
Too bad at walang lens shift feature. Kaya torn din ako between the Optoma HD33 and the Epson 8350 (non-3D but with lens shift). Anyway, this is my HT room. Maliit lang siya (3.56m ang front to rear wall distance). Ceiling height is 9 ft. Would I have a problem mounting it sa rear wall (projector is upside down)? The rear cabinet can easily be removed or repositioned to make way for the projector. The blinds will also need to be replaced with heavy drapes to lessen ambient light (but we always watch movies at night so that it may not be an issue). I plan to use a 100" screen. A single HDMI cable will run from the receiver which is on a rack at the front wall. Initially, I was thinking of a double set-up (PJ and plasma), but if i do that, I will have to use a pull down or motorized screen in front of the plasma, which will decrease the rear wall to screen distance.
(http://i364.photobucket.com/albums/oo88/joeymd/JRC_3472_3_4_5_6_fused.jpg)
Chart taken from Optoma HD33 manual
(http://i364.photobucket.com/albums/oo88/joeymd/OptomaChart.png)
-
nice room!
plasma may take 4" of space sa front, and the loss of size for the motorized PJ screen to the PJ, you may need to check if acceptable. pero parang kaya ang 100" sa 3.56m, esp. for projectors an short throw.
HTH
Exactly what I'm thinking that's why I'm thinking of ditching the dual-display plan. Or I can use a smaller screen (90"). Baka rin kasi nakakalula ang 100" screen viewed from a short distance.
-
no. mine is wall mounted too using a DIY bracket. one advantage of wall mounting the PJ imho is that it is less prone to vibration since walls are usually sturdier than ceilings.
Thanks for the input. I have a couple more PJ newbie questions.
1) If rear wall-mounted ang PJ, gaano kaya kataas ang HD33 projector from the floor (basing it from the posted chart)? Need to consider this din kasi para malaman kung aabot yung supplied 1.8m power cord sa voltage regulator na ilalagay ko sa floor below the projector.
2) When setting up the PJ and screen, what's the ideal screen position/height relative to eye level?
3) may local support ba ang Optoma Projector sa Philippines?
To Verl Kint, I hope you don't mind me asking these questions on your thread since I'm really interested on this model. Just want to make sure that I can use this PJ on my small room , considering it's limitations of not having lens shift feature and a meager 1.2X zoom.
-
Exactly what I'm thinking that's why I'm thinking of ditching the dual-display plan. Or I can use a smaller screen (90"). Baka rin kasi nakakalula ang 100" screen viewed from a short distance.
Dual display is best handled by a receiver with 2 hdmi outs, ESP if you will ceiling mount it.
-
Thanks for the input. I have a couple more PJ newbie questions.
1) If rear wall-mounted ang PJ, gaano kaya kataas ang HD33 projector from the floor (basing it from the posted chart)? Need to consider this din kasi para malaman kung aabot yung supplied 1.8m power cord sa voltage regulator na ilalagay ko sa floor below the projector.
2) When setting up the PJ and screen, what's the ideal screen position/height relative to eye level?
mine is not optoma hd33, but what i did was to position it in such a way as not to use the keystone as much as possible, to avoid jagged edges sa sides. so 50/50 ang keystone ko, which means hindi ko ginamit. so the height was low enough na centered to my viewing level when i'm seated (pj is around 6ft from the floor). madali lang yan, from the illustration, baliktarin mo lng yung concept kung ceiling/wall mounted.just have patience sa pag-measure before the actual setup. then project it to the wall before you install permanently the projector and screen.
-
Exactly what I'm thinking that's why I'm thinking of ditching the dual-display plan. Or I can use a smaller screen (90"). Baka rin kasi nakakalula ang 100" screen viewed from a short distance.
Sa una lang malaki tignan ang 90" vs 100". Pero yun 10" difference, super bale wala kapag nasa 90" na ang usapan. Though of course may better PQ ang 90", i would go for 100" na din.
Thanks for the input. I have a couple more PJ newbie questions.
3) may local support ba ang Optoma Projector sa Philippines?
Yes. Mine is Optoma. Ok din ang service nila, matagal lang and kinda pricey.
-
Yes. Mine is Optoma. Ok din ang service nila, matagal lang and kinda pricey.
Thanks Sir, that's nice to know.
-
mine is not optoma hd33, but what i did was to position it in such a way as not to use the keystone as much as possible, to avoid jagged edges sa sides. so 50/50 ang keystone ko, which means hindi ko ginamit. so the height was low enough na centered to my viewing level when i'm sitted (pj is around 6ft from the floor). madali lang yan, from the illustration, baliktarin mo lng yung concept kung ceiling/wall mounted.just have patience sa pag-measure before the actual setup. then project it to the wall before you install permanently the projector and screen.
Thanks pa3ck608. Will take the needed measurements before deciding what PJ to get.
-
does this mean di na niya kelangan ng 3d coverter box?
Sir Philip mukhang di na kailangan, quote from optoma website:
The projector supports all HDMI 1.4a mandatory 3D formats, side-by-side format and top and bottom format to allow users easy hook up with peripherals that can deliver 3D content. As a full 1080p, it supports all 1080 p formats natively without needing an Optoma 3D-XL box converter box. As with all 3D displays, a 3D source (such as a 3D Blu-ray player or gaming system), 3D content and 3D glasses are required for 3D viewing.
-
mine is not optoma hd33, but what i did was to position it in such a way as not to use the keystone as much as possible, to avoid jagged edges sa sides. so 50/50 ang keystone ko, which means hindi ko ginamit. so the height was low enough na centered to my viewing level when i'm sitted (pj is around 6ft from the floor). madali lang yan, from the illustration, baliktarin mo lng yung concept kung ceiling/wall mounted.just have patience sa pag-measure before the actual setup. then project it to the wall before you install permanently the projector and screen.
I've found that using keystone tends to show a visible loss of PQ, making the images less sharp and the details softer. There are some who argue that this can also be seen with using lens shift (especially for cheaper pj's), although to a lesser degree.
What I advise my friends to use would be projector calculator pro on projectorcentral.com.
http://www.projectorcentral.com/projection-calculator-pro.cfm
Here's what came out for the Optoma HD33:
http://www.projectorcentral.com/Optoma-HD33-projection-calculator-pro.htm
-
I've found that using keystone tends to show a visible loss of PQ, making the images less sharp and the details softer. There are some who argue that this can also be seen with using lens shift (especially for cheaper pj's), although to a lesser degree.
What I advise my friends to use would be projector calculator pro on projectorcentral.com.
http://www.projectorcentral.com/projection-calculator-pro.cfm
Here's what came out for the Optoma HD33:
http://www.projectorcentral.com/Optoma-HD33-projection-calculator-pro.htm
I checked the computed and sa picture may blue horizontal line, do i take it that the optimum horizontal position is edge below the PJ screen for no keystone? di ba dapat sa gitna ng screen and horizontal position ng screen para zero keystone?
-
S mga owners or seen actual projected image ng hd33, kamusta naman po ang black level ng hd33 as an entry-level 1080p 3d pj?
Mediocre b talaga or acceptable naman?
-
S mga owners or seen actual projected image ng hd33, kamusta naman po ang black level ng hd33 as an entry-level 1080p 3d pj?
Mediocre b talaga or acceptable naman?
A lot of factors affect black levels (PJ screen, room lighting, room color). The first time I installed my HD33 and white DIY plywood screen, I was impressed, this being my first time to use a PJ on my HT. But later on I noticed that for bright scenes, the colors seem washed out. I then realized that the PJ light reflects from the screen and illuminates my cream-colored room and when the light reflects back to the screen, the color becomes washed out. So I repainted the screen using light grey paint and I noticed significant improvement in the black levels. I was so happy with the outcome that when the Elitescreen that I ordered from amazon came, I quickly sold it at. Later on, out of curiosity (wanting to know if I could improve PQ some more by using a commercial PJ screen) and not out of need, I reordered an elitescreen (cinegrey). Again, I contemplated on selling it again when it arrived since I was happy with the DIY. Good for me that I decided to use it since it produced significant improvement in the contrast levels. Here is a screenshot sample
(http://i364.photobucket.com/albums/oo88/joeymd/Home%20Theater/JRC_5989a.jpg)
So, to answer your question, the HD33 produces good to very good black levels (depending on what your standards are). I know I could improve on it some more by repainting the ceiling and front wall of the room using dark colors but right now, I don't see a need for that since I'm very satisfied with the PQ. Black levels is definitely not mediocre. But I suggest you use a cinegrey screen for better contrast.
-
nice screenshot!
checked out cinegrey screens in amazon, I think its available for fixed screen setup only,
and I can't have a fixed screen setup in our living room...
with this screenshot and contrast, I would definitely
consider HD33 as my 1st choice when I upgrade my 720p PJ.
Thanks! :)
Here is a screenshot sample
(http://i364.photobucket.com/albums/oo88/joeymd/Home%20Theater/JRC_5989a.jpg)
-
Nice screen shot! I'm really looking forward to owning one. Can you share with us where you got your unit sir. I'm still caught between ordering from Amazon vs. Buying from our suking retailers for the warranty coverage.
-
Nice screen shot! I'm really looking forward to owning one. Can you share with us where you got your unit sir. I'm still caught between ordering from Amazon vs. Buying from our suking retailers for the warranty coverage.
He got his unit at US as it much cheaper than local purchase.
-
Nice screen shot! I'm really looking forward to owning one. Can you share with us where you got your unit sir. I'm still caught between ordering from Amazon vs. Buying from our suking retailers for the warranty coverage.
If the price diff is around 5k I suggest getting a local unit for peace of mind ;)
-
After seeing R1DVD's screenshot, can't help but to compare it with my PJ, tried to capture the same freezed frame and viewing angle.
Just want to share this photo I took a while ago:
Acer H5360BD
(http://i985.photobucket.com/albums/ae331/Allan_2180/DSC_6117aa.jpg)
Optoma HD33
(http://i364.photobucket.com/albums/oo88/joeymd/Home%20Theater/JRC_5989a.jpg)
Judging from these pictures, black levels are almost the same.
and different from what I've been thinking.
Besides resolution, I'm having second thought of upgrading my current PJ.
-
by comparing the 2 screenshots, HD33 has the edge in overall sharpness and details. the blacks produced by the H5360BD lost a lot of details.
-
If the price diff is around 5k I suggest getting a local unit for peace of mind ;)
Actually malayo price sir. Amazon price is around 55K plus shipping of about 9K. 65K approximately total. Sa SNS this is selling for 80K but with 1 year warranty. Approximately 15K difference.
-
i'm not sure if the local optoma distro carries this model. maybe the local sellers bought their units abroad and warranty is only in-house. correct me if i'm wrong
-
Actually malayo price sir. Amazon price is around 55K plus shipping of about 9K. 65K approximately total. Sa SNS this is selling for 80K but with 1 year warranty. Approximately 15K difference.
Good price na yung 80k considering the 1 year warranty.
by comparing the 2 screenshots, HD33 has the edge in overall sharpness and details. the blacks produced by the H5360BD lost a lot of details.
Great screenshot Allan, but I would agree with GneW. There are subtle differences in terms of sharpness and details. But then you're only looking at 6.5" diagonal screenshot. These changes will surely be magnified if you're going to blow it up to say 92" diagonal. Also, it would be very difficult to compare PJs using screenshots alone. Bottomline is, if you're still happy with your current setup, then don't upgrade. Personally, I don't upgrade just because a new model or new feature comes along. As long as I'm happy with the current setup, then that gadget stays with me for a long time.
-
Thanks Sir R1DVD!
Tried my best to imitate your screenshot Sir! ;D
I agree that its difficult to compare PJ by screenshots alone, specially with different camera settings.
Still, 720p to 1080p upgrade itch is attacking me. >:D
If my item is not yet sold by the end of this month, I'll just keep my PJ setup and be happy with it for now...
Good price na yung 80k considering the 1 year warranty.
Great screenshot Allan, but I would agree with GneW. There are subtle differences in terms of sharpness and details. But then you're only looking at 6.5" diagonal screenshot. These changes will surely be magnified if you're going to blow it up to say 92" diagonal. Also, it would be very difficult to compare PJs using screenshots alone. Bottomline is, if you're still happy with your current setup, then don't upgrade. Personally, I don't upgrade just because a new model or new feature comes along. As long as I'm happy with the current setup, then that gadget stays with me for a long time.
-
I have been enjoying this pj for the past 2 weeks. Last night, i discovered a feature in the osd settings called PureEngine motion. I enabled it and I was blown away! it's like watching those new LED TVs where the image just pops out as if the content was semi-3d, only i'm watching it on a 100" screen!
I love this projector!
-
I have been enjoying this pj for the past 2 weeks. Last night, i discovered a feature in the osd settings called PureEngine motion. I enabled it and I was blown away! it's like watching those new LED TVs where the image just pops out as if the content was semi-3d, only i'm watching it on a 100" screen!
I love this projector!
[/quote
Bro any problems with lag when gaming with it?
-
I haven't noticed any lag at all. sometimes sa video, but I think it's because my laptop is not really made to play hd files.
-
How about multiplayer games thru ps3 or xbox? specifically fps type of games.
-
(http://www.optomausa.com/webresources/images/gallery/large_a67ca9068d454804bfc9137eca60b56f.jpg)
Key Features of HD33:
- Bright at 1800 ANSI lumens and contrast ratio of 4000:1
- True 1080p 2D/3D for Blu-ray and gaming consoles
- Up to 300” screen size for large group viewing
- Backlit IR remote control
- Features Texas Instruments 1080p DLP® chipset
- PureMotion image processing ensures smooth, judder-free images
Currently $1,499 online. Not bad, considering the features are on par with far more expensive projectors.
Will this be available in the Philippines?
specs seem lackluster compared to offerings from Epson and Panasonic.
-
sometimes its not all the spec sheets that matter. reviews reveal that the hd33 is probably the best bang for the buck projector these days. I contemplated on the epson 3010 and 5010 but there have been reports of issues with the 3d glasses signal interfering with other devices. I didn't want to risk it.
-
Has anyone compared these with mitsubishi hc4000, panasonic pt ar100 and the hd33?
-
I have been enjoying this pj for the past 2 weeks. Last night, i discovered a feature in the osd settings called PureEngine motion. I enabled it and I was blown away! it's like watching those new LED TVs where the image just pops out as if the content was semi-3d, only i'm watching it on a 100" screen!
I love this projector!
tried this and set to 1, the PQ pops out more
-
Has anyone compared these with mitsubishi hc4000, panasonic pt ar100 and the hd33?
do you want to compare the 2D performance of the HD33 vs the mits and panny?
for sure, the HC4000 is better. the performance of the HC4000 (2D) is already known to be better even compared to the expensive counterparts. don't know about the the AR100 though.
-
specs seem lackluster compared to offerings from Epson and Panasonic.
check out the reviews on the net and compare the pros/cons of each product.
wala yata direct equivalent ang panny sa hd33 price-wise.
-
I want to see the panny in action.
-
specs seem lackluster compared to offerings from Epson and Panasonic.
Which models and at what price range? :)
-
Which models and at what price range? :)
the Epson 3010 and the Panasonic AR100 at the ~$1500 range. the AR100 lacks 3D though.
-
do you want to compare the 2D performance of the HD33 vs the mits and panny?
for sure, the HC4000 is better. the performance of the HC4000 (2D) is already known to be better even compared to the expensive counterparts. don't know about the the AR100 though.
Thanks for the reply sir. I'm not too sure 3d is my thing. I recently watched the hobbit in IMAX and I wasn't turned on that much.
I wonder at times if ht projectors would do a better job
-
the Epson 3010 and the Panasonic AR100 at the ~$1500 range. the AR100 lacks 3D though.
this will help you out in comparing the 3010 and HD33
Shootout: Epson Home Cinema 3010 vs. Optoma HD33
So far, the Home Cinema 3010 and the Optoma HD33 are the only full HD 3D projectors to be released for less than $2,000. While these projectors are both budget-friendly and full HD 3D compliant, there are some important differences that will determine which one is right for you.
Light output. The Home Cinema 3010 is a brighter projector than the HD33, with a maximum output of 2110 lumens on our test sample compared to 1049 lumens on the HD33. In Cinema mode, with the lamp at full power, the Home Cinema 3010 measured 1373 to the HD33's 847. In low power mode, those numbers became 947 and 661, respectively. What this means is that the Home Cinema 3010 is preferable any time you have a very large screen or a lot of ambient light, while dark rooms and smaller screen sizes will benefit more from the HD33's more moderate output. There is no way to lower light output on the Home Cinema 3010 below 900 lumens without using an ND filter, and owners of screens 120" in diagonal or smaller should take this into consideration before making a purchase.
Contrast. We set the Home Cinema 3010 to Cinema mode with the lamp at its low power setting, while the HD33 was set to Cinema with the lamp at full power, putting the two projectors roughly 100 lumens apart--almost identical, as far as the human eye is concerned. The 3010 has deeper black levels than the HD33 in dark scenes thanks to its auto iris. In scenes of average illumination, the HD33 took the lead, with deeper black levels and comparable highlights. In bright scenes, the HD33 maintained its deeper blacks while the 3010 had bright, sparkling highlights.
3D image quality. The Optoma HD33's 3D picture is more stable and more refined than that of the Home Cinema 3010, with significantly less crosstalk and flicker. This makes the HD33 easier to watch over a long period of time. Though the 3010 is the brighter of the two projectors, 3D glasses make it look only a little brighter than the HD33 in 3D despite the sizable difference in 2D brightness. The HD33 has markedly higher contrast in 3D, which gives the picture greater depth.
3D ease of use. The HD33's 3D glasses have a wider fit and are also lighter than those of the 3010, so they feel more comfortable over an extended viewing session. The HD33 has an external radio-frequency emitter, while the 3010's infrared emitter is internal. Radio frequency sync is not subject to the line-of-sight limitation of infrared, though this means you have to turn off power to the projector if you don't want to run down your glasses' batteries during a bathroom break. Finally, the Home Cinema 3010 includes two pairs of glasses in the box, while the HD33's glasses must be purchased separately. At less than $100 per pair, creating an equivalent system ends up costing $1699 to the Home Cinema 3010's $1599. Note, though, that the 3010e does not include glasses, so an equivalent system would cost $1999.
Placement flexibility. The Home Cinema 3010's 1.6:1 lens offers additional wiggle room compared to the restrictive 1.2:1 zoom lens on the HD33. Neither projector has lens shift. On the HD33, there is a slight upward throw angle such that the bottom edge of the image appears 7% of the image's height above the centerline of the lens, while the Home Cinema 3010 puts the bottom edge and the lens centerline exactly level. This means that the HD33 will be easier to ceiling mount in some instances, since it is less likely to require the use of an extension tube. It also opens up the possibility of placing the HD33 on a low table without being forced to tilt the projector and apply keystone correction.
or this
Coderguy's Top Projector Pics at AVSForum (http://www.avsforum.com/t/1391476/coderguys-top-projector-picks)
-
Thanks for the reply sir. I'm not too sure 3d is my thing. I recently watched the hobbit in IMAX and I wasn't turned on that much.
I wonder at times if ht projectors would do a better job
if 3D is not your thing, take the HD33 off your list and choose a PJ that excels in 2D.
at this price range, i think the mitsubishi HC4000 is the best bang-for-the-buck PJ for 2D use.
-
bitin nga ako e. my avr is not 3d capable, so I'm not able to take advantage of my optomas 3d feature. still waiting for my new yammy
-
if 3D is not your thing, take the HD33 off your list and choose a PJ that excels in 2D.
at this price range, i think the mitsubishi HC4000 is the best bang-for-the-buck PJ for 2D use.
for 2D-only, the Optoma HD21 and the Panasonic AR100 are both good choices. :)
-
bitin nga ako e. my avr is not 3d capable, so I'm not able to take advantage of my optomas 3d feature. still waiting for my new yammy
same tayo bro, both my BD and NMT are directly connected to the HD33 for ease in watching 3D. both audio out of the sources are connected via optical cable.
-
for 2D-only, the Optoma HD21 and the Panasonic AR100 are both good choices. :)
if the optoma HD21 is already good in 2D, then HD33 is also good or even better. the HD33 has 6x color wheel and an improved version of the HD20.
what's the difference pala ng HD20 and HD21?
-
if the optoma HD21 is already good in 2D, then HD33 is also good or even better. the HD33 has 6x color wheel and an improved version of the HD20.
what's the difference pala ng HD20 and HD21?
I'm not sure. the HD21 is a newer model.
-
same tayo bro, both my BD and NMT are directly connected to the HD33 for ease in watching 3D. both audio out of the sources are connected via optical cable.
I thought about doing that but that would mean you won't be able to do dts hd since that requires hdmi.
-
I thought about doing that but that would mean you won't be able to do dts hd since that requires hdmi.
you are right but for my untrained ear, the difference between the 2 audio format is not much of a leap. maybe i need to clean my ears ;D
-
you are right but for my untrained ear, the difference between the 2 audio format is not much of a leap. maybe i need to clean my ears ;D
if you have 5.1 setup, then no need siguro. dts hd ma kasi may pang 7.1 kasi.
-
i have a 7.1 setup with front wide.
there was an blind test between lossless and lossy format before at streetsmart's place. IIRC, using his very hi-end gears, most of the pdvd gurus did not hear a difference.
-
Gotta love blind tests. :D
I myself can't tell the difference between DTS and DTS-MA but curiously enough, I can distinguish between Dolby Digital and TrueHD. :)
-
Dahil s curiousity ko s dts vs dts hdma, upgraded my NMT, now im selling it cz ala difference for me
-
I just noticed that my 720p files look like crap when they are played on a 100" screen. Ganun din ba sa inyo?
-
I just noticed that my 720p files look like crap when they are played on a 100" screen. Ganun din ba sa inyo?
Yeah...
Most 720p materials that are played on 55" and above display becomes pixelated...
-
Yeah...
Most 720p materials that are played on 55" and above display becomes pixelated...
but the 720p files we played via htpc on your pana was still good though...sorry sa OT hihihi
-
but the 720p files we played via htpc on your pana was still good though...sorry sa OT hihihi
It was good but still isn't good enough for some... ;D
-
It was good but still isn't good enough for some... ;D
like you!!! he he he
-
great pj Sir! :) nice pq of the Optoma HD33 :)
-
Anyone knows how much this projector now sells locally? I plan to get one but my current receiver is a YAMAHA RX V663 and i currently using my PS3 to watch blueray movies .. will the projector offer a Full HD 3D movies or i need to upgrade my receiver? -- sorry newbie =)
-
I use rxv 673 with my optoma hd33. Full hd 3d babeh!
-
Anyone knows how much this projector now sells locally? I plan to get one but my current receiver is a YAMAHA RX V663 and i currently using my PS3 to watch blueray movies .. will the projector offer a Full HD 3D movies or i need to upgrade my receiver? -- sorry newbie =)
check the specs of your receiver if it is 3D capable. if not, it will not process the frame sequential format of a bluray 3D but instead the receiver will downgrade it to SBS or TaB format.
another work around is to connect your PS3's HDMI out direct to the HD33 and use optical from PS3-to-receiver for audio. it works, but too many remote controls to mess around.
-
thanks for the inputs my receiver is not 3D capable :(
well what i plan is use muna my existing receiver then upgrade lateron. If I use the PS3 it will it stil output a 7.1 sound format?
-
thanks for the inputs my receiver is not 3D capable :(
well what i plan is use muna my existing receiver then upgrade lateron. If I use the PS3 it will it stil output a 7.1 sound format?
i'm not familiar with PS3 if it can output 7.1 bro. just do a research or ask at the PS3 thread.
-
inggit ako
-
Sir questions ulit with a room of 4 x 4 and using this projector tama lang ba na I buy a screen na good for 100" or is too big na and i just go with a smaller size like 97"?
Hindi ideal na i get a bigger screen 100" tapos projection output niya mga 97 or 80" lang right makikita pagnanood ka ng movie and sayang lang sa pera.
-
Sir questions ulit with a room of 4 x 4 and using this projector tama lang ba na I buy a screen na good for 100" or is too big na and i just go with a smaller size like 97"?
Hindi ideal na i get a bigger screen 100" tapos projection output niya mga 97 or 80" lang right makikita pagnanood ka ng movie and sayang lang sa pera.
better fire up muna ur PJ on the wall and get ur desired size that suits u and comfort to ur eYes. after that, now u can make or order the PJ screen.
kung may sobra naman un screen mo, u can put black borders naman para gaganda un contrast. some PJ users here use felt paper, black tape.
-
Sir questions ulit with a room of 4 x 4 and using this projector tama lang ba na I buy a screen na good for 100" or is too big na and i just go with a smaller size like 97"?
Hindi ideal na i get a bigger screen 100" tapos projection output niya mga 97 or 80" lang right makikita pagnanood ka ng movie and sayang lang sa pera.
for a a 100" screen, the ideal distance is 11 ft.
-
thanks guys for the input .. 11 ft = 3.3meters so pwede na siguro siya na 100" sa akin anyway. Maybe you guys ar right ... i should first but the projector before getting the screen ... will buy it kasi online mas ideal kasi sana na sabay na.
Medyo OT: ok lng naman na i put the amplifier and other consoles either sa side or back part ng room diba para mas malinis tingnan Para yung harap makikita lang is the screen and the front speakers.
-
thanks guys for the input .. 11 ft = 3.3meters so pwede na siguro siya na 100" sa akin anyway. Maybe you guys ar right ... i should first but the projector before getting the screen ... will buy it kasi online mas ideal kasi sana na sabay na.
Medyo OT: ok lng naman na i put the amplifier and other consoles either sa side or back part ng room diba para mas malinis tingnan Para yung harap makikita lang is the screen and the front speakers.
Yup, better yan. Yan pinagsisihan ko sa media room ko. Get You don't distracted with the lights while watching. Sa side mo lagay para kita pa rin yung equipment if you would like to see them.
-
Javauser: oo nga noh I think sa sa side will be better also tama ka the lights of the equipment will be a distraction if ever. Thanks bro.
To those who have this projector do you guys use it to watch cable tv? I'm just thinking like watching PAPERVIEW fights. Plan to subscribe in SKY HD sana -- will the projector work or depende sa amplifier?
I think the SKY HD (digibox) is HDMI na so just insert it sa amplifier's HDMI then connect it sa projector and i hope it's good to go.
-
Javauser: oo nga noh I think sa sa side will be better also tama ka the lights of the equipment will be a distraction if ever. Thanks bro.
To those who have this projector do you guys use it to watch cable tv? I'm just thinking like watching PAPERVIEW fights. Plan to subscribe in SKY HD sana -- will the projector work or depende sa amplifier?
I think the SKY HD (digibox) is HDMI na so just insert it sa amplifier's HDMI then connect it sa projector and i hope it's good to go.
I don't have Sky Cable HD, so I don't know if the HD's digibox has HDMI-out already. but its possible to connect the digibox to a projector using the video-in (yellow plug).
-
Javauser: oo nga noh I think sa sa side will be better also tama ka the lights of the equipment will be a distraction if ever. Thanks bro.
To those who have this projector do you guys use it to watch cable tv? I'm just thinking like watching PAPERVIEW fights. Plan to subscribe in SKY HD sana -- will the projector work or depende sa amplifier?
I think the SKY HD (digibox) is HDMI na so just insert it sa amplifier's HDMI then connect it sa projector and i hope it's good to go.
it will work. sky digibox has an hdmi out which can be connected to your receiver.
sky digibox -> av receiver -> optoma hd33
-
May motion interpolation feature ba 'to?
-
May motion interpolation feature ba 'to?
not sure if same lang ito with "Creative frame interpolation" feature of HD33
-
not sure if same lang ito with "Creative frame interpolation" feature of HD33
Soap opera effect (which makrs things look live/ fast moving)?
If yes, then yep. :D considering this instead of a tv for my bedroom
-
you guys know how much na market price niya locally?
-
you guys know how much na market price niya locally?
80k daw. Pls backread to see it mentioned. :D
-
i'm planning to buy this projector wthin the week ... anyway do you guys know any 3rd party 3d glasses that is compatible w/ the projector?
-
i'm planning to buy this projector wthin the week ... anyway do you guys know any 3rd party 3d glasses that is compatible w/ the projector?
also eyeing on this PJ... I think any DLP 3D glasses will work and its the cheapest way or a VESA 3D glasses(a separate VESA transmitting device must be included with the glasses for either IR or RF transmission).
-
Optoma HD33 Owners,
baka pwede po pa-share ng settings ng PJ? :)
LAMP MODE(Bright/Eco/Auto):
DISPLAY MODE(Cinema/Bright/Photo/Reference/User):
CONTRAST:
BRIGHTNESS:
SHARPNESS:
COLOR:
TINT:
ADVANCED
GAMMA:
Gamma Film Curve type:
Offset:
PURE ENGINE
Pure Motion:
Pure Detail:
Pure Color:
COLOR SETTINGS
Color Temp:
RGB BIAS/GAIN
Red Gain:
Green Gain:
Blue Gain:
Red Bias:
Green Bias:
Blue Bias:
Thanks!
-
Anyone knows how much this projector now sells locally? I plan to get one but my current receiver is a YAMAHA RX V663 and i currently using my PS3 to watch blueray movies .. will the projector offer a Full HD 3D movies or i need to upgrade my receiver? -- sorry newbie =)
IIRC, the HD33 is available by order at SnS for around 80+k. btw, I checked the specs of the YAMAHA RX V663 and found that it doesn't support 3D. you'll need to get a new receiver that supports 3D. :-X
-
After rainy days of June kasi nagka-trouble na HD33 ko, after a few minutes of
operation nagshutdown bigla then flashing orange LED, seems to be overheating
pero all of the fans are working, even tried turning On High Altitude setting to increase
fan speed, already replaced bulb even though 440H pa lang yung dati.
it shuts down also pag nagchange ako ng sources and color settings (user, photo bright)
maybe it has something to do with the colorwheel but Im not sure.
Anyone knows kung saan ko pwede ipa-check and clean HD33?
Thanks!
-
After rainy days of June kasi nagka-trouble na HD33 ko, after a few minutes of
operation nagshutdown bigla then flashing orange LED, seems to be overheating
pero all of the fans are working, even tried turning On High Altitude setting to increase
fan speed, already replaced bulb even though 440H pa lang yung dati.
it shuts down also pag nagchange ako ng sources and color settings (user, photo bright)
maybe it has something to do with the colorwheel but Im not sure.
Anyone knows kung saan ko pwede ipa-check and clean HD33?
Thanks!
ang bilis mo nagpalit ng bulb, 400 hrs lang? nasa 900+ hours na ata ang hd33 ko. magkano at saan mo binile ang replacement bulb?
-
buo pa naman yung dating bulb just to make sure baka may problem na kasi sa old bulb.
Sa ebay ko pa po inorder dati 3yrs ago from korea yung seller orig osram 100usd bulb lang mismo.
-
buo pa naman yung dating bulb just to make sure baka may problem na kasi sa old bulb.
Sa ebay ko pa po inorder dati 3yrs ago from korea yung seller orig osram 100usd bulb lang mismo.
mura lang pala ang bulb compared to panny and epson
-
mura lang pala ang bulb compared to panny and epson
$79 lang yung bulb sa amazon
http://www.amazon.com/dp/B00EZAWPF4/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=20MSVYX0JJJ6&coliid=I2OXPC5YKB2LA4
$209 if you get the lamp + housing
http://www.amazon.com/dp/B005UKYJ70/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=20MSVYX0JJJ6&coliid=ILGK3CODY6Q1V
-
$79 lang yung bulb sa amazon
http://www.amazon.com/dp/B00EZAWPF4/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=20MSVYX0JJJ6&coliid=I2OXPC5YKB2LA4
$209 if you get the lamp + housing
http://www.amazon.com/dp/B005UKYJ70/ref=wl_it_dp_o_pC_S_ttl?_encoding=UTF8&colid=20MSVYX0JJJ6&coliid=ILGK3CODY6Q1V
is the replacement bulb easy to attach to the existing housing? plano ko bumile ng bulb para always ready when needed.
-
is the replacement bulb easy to attach to the existing housing? plano ko bumile ng bulb para always ready when needed.
Actually hindi pa ako nakapagpalit ng bulb. But from what I've read, madali lang at meron daw videos sa youtube
-
is the replacement bulb easy to attach to the existing housing? plano ko bumile ng bulb para always ready when needed.
Dati I bought bulb with housing. It's fairly easy to replace naman. Kinda plug & play lang ang dating.
-
guys, wala po ba kayo talaga alam na nagrerepair ng DLP Projectors esp. Optoma HD33 dito sa Manila?
plan ko na kasi i-troubleshoot by myself na lang, bought myself electronics contact cleaner, i-dissamble ko pag may time na ako.
ung bulb, madali lang naman 4 screws lang ata separated na cya sa housing, medyo tricky lang yung sa terminal ng bulb at connector ni optoma, medyo masikip ikabit, mahirap pwersahin baka mabali terminal.
-
I would recommend Markcrenze http://www.pinoydvd.com/index.php?action=profile;u=21515
-
tried cleaning my HD33 with electronic cleaner. still i got the "lamp failure" indicator, orange led and flashing red. I guess this is the end of my HD33 after 3 yrs with less than 500H use. :(
-
replaced the color wheel assembly (ordered parts from Optoma USA for $39.00),
still lamp failure problem persist.
next... try to replace the Lamp Driver, I already placed my order from Optoma USA.
-
Beyond Innovations is local distributor of Optoma.
Their office is located at Libis.
-
Already called them and they quoted me P2500.00 for service charge if I will proceed with the repair or P1700.00 for diagnostic fee if I am going to back out, they will send me separate quotation in case there are parts that will be replaced and I think they will do the same thing, order parts from Optoma USA of course I will shoulder handling/shipping cost + P2500.00 service charge, thought of saving at least P2500.00 by DIY, I guess I lost when I decided to replace colorwheel assy first before the lamp driver.
Beyond Innovations is local distributor of Optoma.
Their office is located at Libis.
-
What I know if the diagnostic fee is only P700.00 at Beyond Innovations.
-
I almost gave up on my optoma HD33 which has a shutting down problem and lamp failure indication with only less than 500H of usage.
Already replaced the bulb, installed new color wheel and lamp driver ordered from Optoma USA yet the same problem persists.
I found out that the lamp cover sensor switch was the culprit.
Whenever that switch gets hot caused by the warm air blown by the fans the contacts inside got loose which sends a cover was opened signal to the power supply board and it immediately shuts down and triggered the lamp error indicator.
So what I did on the power board was that I bypassed the lamp cover sensor by soldering the 2-terminal connector together where the tact switch is connected.
Since I bypassed the lamp cover sensor, HD33 works normal again. (with my fingers crossed)
Hope this solves the problem. ;D
-
^ laki na siguro ng nagastos mo? sana nga oks na yan at walang ibang parts ang madale... wag lang mapraning ang board hehe...
-
^ laki na siguro ng nagastos mo? sana nga oks na yan at walang ibang parts ang madale... wag lang mapraning ang board hehe...
Mga 5thou lahat nagastos ko sa color wheel and lamp driver + shipping, yung lamp old stock ko un kya nagkastock tuloy ako ng colorwheel, lamp & lamp driver...
nagpaplano na ako bumili ng bagong PJ
kaso sinipag uli ako kalikutin muna, aun umandar na uli ngaun...
-
Mga 5thou lahat nagastos ko sa color wheel and lamp driver + shipping, yung lamp old stock ko un kya nagkastock tuloy ako ng colorwheel, lamp & lamp driver...
nagpaplano na ako bumili ng bagong PJ
kaso sinipag uli ako kalikutin muna, aun umandar na uli ngaun...
buti na lang kinalikot mo muna, yun sa akin hopeless na talaga. :(
(ax200-mainboard ang sira)
-
buti na lang kinalikot mo muna, yun sa akin hopeless na talaga. :(
(ax200-mainboard ang sira)
Kung kasing dali sana ng sa optoma pagorder ng mga parts nyan bka narepair mo na din yan.
-
buti di pa nagloloko yung dlp chip nyan sir
-
buti di pa nagloloko yung dlp chip nyan sir
Nung bago magloko lamp cover switch napansin ko na pg nirereallign ko cya from its ceiling mount nagkakaroon ng vertical lines yung screen. Naging solution ko dun bumili ako ng P400.00 worth ng electronics contact cleaner nilinis ko ung connector between DLP Chip board at main board, OK n uli cya.
-
my HD33 is still working fine, nasa 1250 hrs na. currently used by my son sa xbox, hehe at pa minsan ako sa movies. minsan nga whole day naglalaro ng xbox pag weekends. sana bulb lang ang papalitan in the future.
@allan_2180, saan at magkano bili mo sa spare bulb?
-
Nung bago magloko lamp cover switch napansin ko na pg nirereallign ko cya from its ceiling mount nagkakaroon ng vertical lines yung screen. Naging solution ko dun bumili ako ng P400.00 worth ng electronics contact cleaner nilinis ko ung connector between DLP Chip board at main board, OK n uli cya.
yung hd66 ko kasi pati epson ng bro ko nagkaproblema sa dlp chip nagkaroon ng white dots... sa umpisa unti lang nung tumagal para kang naka tingin sa langit maraming bituin...he he he....change the dlp chip itself ok na uli...
-
my HD33 is still working fine, nasa 1250 hrs na. currently used by my son sa xbox, hehe at pa minsan ako sa movies. minsan nga whole day naglalaro ng xbox pag weekends. sana bulb lang ang papalitan in the future.
@allan_2180, saan at magkano bili mo sa spare bulb?
Depende po cguro tlga sa environment at humidity kung saan nkamount PJ, sa akin nung mahabang rainy season nagsimula magpakita ng problem, nka mount kc sa living room hindi sa theater room, kya ngaun nkabalot na cya ng dust cover after use.
Yung spare bulb ko sa eBay ko inorder 100usd pa dti 4yrs ago nung Acer H5360BD pa PJ ko, nlaman ko same lng sila ng optoma hd33 ng bulb kya hindi ko sinama sa benta nung nag upgrade ako pti nga Acer DLP glasses compatible din kay HD33.
-
yung hd66 ko kasi pati epson ng bro ko nagkaproblema sa dlp chip nagkaroon ng white dots... sa umpisa unti lang nung tumagal para kang naka tingin sa langit maraming bituin...he he he....change the dlp chip itself ok na uli...
Buti nga available na sa ebay ang mga dlp chips, pro kung gusto mkasigurado na orig parts e we can order directly din sa optoma usa, just email them papadala na nila parts, pero they dont send directly to PH, ako I used Johnny Air to ship the parts dito sa PH.
-
Sobrang na-miss namin manuod sa HD33.
5mos. ko din hindi nagamit HD33 kya kahit telenovela sa PJ kmi nanuod to test the unit.
ZenFone 2 lang pinang kuha ko dito:
(http://i985.photobucket.com/albums/ae331/Allan_2180/Mobile%20Uploads/P_20160211_214133_1_zpskhod2lwn.jpg)
(http://i985.photobucket.com/albums/ae331/Allan_2180/Mobile%20Uploads/P_20160211_213943_1_zpscjiggqys.jpg)
(http://i985.photobucket.com/albums/ae331/Allan_2180/Mobile%20Uploads/P_20160211_215918_1_zps4uvgfmho.jpg)
-
my 3-yr old HD33 had clocked 1467 hours and still working fine. ilang hours ang rating ng bulb? hindi pa kasi kalahati ang lamp hour bar.
(http://i11.photobucket.com/albums/a165/weng2x/Mobile%20Uploads/P_20160313_212420_zpskxi8qfh0.jpg) (http://s11.photobucket.com/user/weng2x/media/Mobile%20Uploads/P_20160313_212420_zpskxi8qfh0.jpg.html)
-
According to specs, HD33 projection lamp is rated to last up to 4000 hours in standard mode or 3000 hours in bright mode* (Pero may fine print)
*Lamp life is dependent on many factors, including lamp mode, display mode, usage, environmental conditions and more.
-
Have you considered adding ND Filter to improve the black level of your HD33?
Bought this GLASS ND2 filter from eBay for $12.00.
Haven't mounted it yet...will try this weekend.
(http://i985.photobucket.com/albums/ae331/Allan_2180/Mobile%20Uploads/Screenshot_2016-03-14-18-09-56_1_1_zpsmp7fvxel.jpg)
-
^ While I have no issues with the black level of the HD33, please do share your experience after installation of the filter. Thank You.
-
According to specs, HD33 projection lamp is rated to last up to 4000 hours in standard mode or 3000 hours in bright mode* (Pero may fine print)
*Lamp life is dependent on many factors, including lamp mode, display mode, usage, environmental conditions and more.
my settings is always on standard mode kaya pala di pa kalahati ang lamp hour bar. lately puro xbox ginagamit ng hd33 ko. gaming marathon pa pag weekend :)
i'm happy with the black level but maybe this filter will make it better pa. how long was the shipping from ebay and did the seller send it via post office?
-
Sa living room kasi setup ko and white ceiling at beige wall kya malakas reflections sa screen lalo na pag bright scenes, na-research ko na ND 2 Filter should help, nahirapan lang ako maghanap ng 72mm na cheap yet made of GLASS ND Filter karamihan kasi resin or plastic made which is OK for cameras but bad for PJ's.
In 16 days lang nasa akin na item.
Seller is from UK they send it via Royal Mail Airmail.
Will try to post my comparison soon.
-
HELP!!!
bigla lang ayaw mag ON ang HD33 ko. hindi na umiilaw ang power led light sa likod. checked the AC outlet, gumagana naman. naglalaro pa ng xbox ang anak ko kagabi.
what do you think is wrong with my unit?
-
Kung totally dead na unit mo (NO standby led indicator) possible na due to power surge yan. And hindi ganun kadali idisassemble HD33 to look for or replace burned parts in power board. Better bring it to your nearest JBL/Harman Kardon store but you have to pay for add'l pickup service fee or you can bring it directly to Beyond Innovations, Inc. in Libis QC.
-
Kung totally dead na unit mo (NO standby led indicator) possible na due to power surge yan. And hindi ganun kadali idisassemble HD33 to look for or replace burned parts in power board. Better bring it to your nearest JBL/Harman Kardon store but you have to pay for add'l pickup service fee or you can bring it directly to Beyond Innovations, Inc. in Libis QC.
correct, no led indicator na siya. kaka inis lang kasi gumana naman the night before pero pagamit kinabukasan ayaw na mag on.
will search the contacts of beyond innovations sa net. i'm from leyte so i have to send the PJ to them by courier
thanks :)
-
is there any fuse in the unit that may have popped out?
-
is there any fuse in the unit that may have popped out?
Na-contact nyo na po ba service center d2 sa Manila?
Not sure kung may nakita ako na Fuse sa Power Board...
Bka ksi 0-ohm Resistor type or ceramic type(non user replaceable) naka mount dun, nsa pinakailalim ksi power board madami pa kakalasin bgo un maexpose.
Bka pde mo na din pacheck sa local electronics service center jan sa Leyte or try mo i-DIY research ka ng service manual ng HD33 sa net may step by step instructions dun how to dismantle the unit.
-
Found images of LVPS Power Supply:
Possible na sa primary side ng board ang sira(left side), may solder-in fuse na nkaheat shrink tubing rated 8A/250V, and hindi cya user replaceable, bka sa local electronics service center i-DIY nla fuse replacement, pag sa service center possible na buong LVPS Power Supply Board papalitan nila, if you can DIY bumili ka ng solder-in fuse(google it for image) or pag hindi naman nasira fuse you contact optoma USA for HD33 LVPS and JAC for shipping. For price estimate sa eBay nsa around 1.5T to 2T price nya. Inquire ka din ng mga repair estimates pra malaman saan mas makakamura at makakasigurado.
(https://farm2.staticflickr.com/1647/26183567190_f16ffd813b_h.jpg) (https://flic.kr/p/FTKCiC)
(https://farm2.staticflickr.com/1526/26456433515_33654828be_z.jpg) (https://flic.kr/p/GiS8Xr)
-
hi allan,
maraming salamat sa pag share mo sa possible damaged part ng hd33 ko. nag message ako sa beyond innovation sa fb pero malabo ang sagot, tatawagan ko nalang sila later.
magandang idea ang bumili ng power board sa US, maka mura at mabilis pa. pero problema ko paano malaman na yon ang sira. hanap muna ako service center techs dito na may alam sa mga ganito'ng issue ng appliance.
salamat uli bro
-
Makapal na pala ang alikabok sa fan filter.di ko pa na linisan ever since. Isa kaya ito sa cause sa pagkasira ng power supply? Paano pala linisin,may quick opening ba sa case na accessible ang filter?
-
Makapal na pala ang alikabok sa fan filter.di ko pa na linisan ever since. Isa kaya ito sa cause sa pagkasira ng power supply? Paano pala linisin,may quick opening ba sa case na accessible ang filter?
Dahil sa init ng panahon ngaun mas prone sa overheating mga appliance natin. No other way to clean HD33's side mesh but to open the unit, pde mo din i blower pro pag hindi umaandar ang fan bka mas kumalat lang sa loob ung dust particles at bka makapasok sa colorwheel assy papunta sa lens at magka dust blobs ka pa... npakahirap din linisin ng lens, ginamitan ko pa sa akin ng DSLR Lens cleaner. basta pag OK ang fuse e i-replace mo na lang buong powerboard kc baka umabot na sa regulator IC's at transformers ang damage(usually kasi may thermal fuse mga transformers pwede ito ma-bypass pero delikado pg nagoverheat uli).
If ur local service center can dismantle HD33, bka pde ikaw na lang umorder ng ASSY 80W LVPS FOR EX76 sa Optoma USA+JAC, then ipakabit mo sa local service center. At least cleaning at service fee na lang babayaran mo.
-
Wala yata service center dito sa amin na marunong sa optoma pj. Is beyond innovation the only authorized optoma service center? Do they supply the parts or they allow us to buy theb they will only charge the labor cost?
-
Wala yata service center dito sa amin na marunong sa optoma pj. Is beyond innovation the only authorized optoma service center? Do they supply the parts or they allow us to buy theb they will only charge the labor cost?
As of now Beyond Innov is the only authorized distributor and service center of Optoma in PH... and wala pa kc ako experience magparepair sa kanila since hindi natuloy yung repair ng HD33 ko sa kanila. Will PM to you my previous Beyond Innov contact person...
-
As of now Beyond Innov is the only authorized distributor and service center of Optoma in PH... and wala pa kc ako experience magparepair sa kanila since hindi natuloy yung repair ng HD33 ko sa kanila. Will PM to you my previous Beyond Innov contact person...
sige sir will call that person asap para matanong man lang kung may pag-asa o gaano katagal bago ma repair
-
Update lang sa paginstall ko ng ND filter...
(http://i985.photobucket.com/albums/ae331/Allan_2180/Mobile%20Uploads/Screenshot_2016-03-14-18-09-56_1_1_zpsmp7fvxel.jpg)
The result is that ND2 crushed the blacks too much...
also the image had a greenish tinge kya need to change the RGB Gain and have to set the lamp to "Bright" setting to increase the brightness a bit higher.
I think its not ideal for my livingroom setup...
But maybe good for a really dark man cave setup.
-
due to my busy sched, i have not sent in my hd33 for repair and it's almost a year now since it conked out.
kanina wala akong magawa tinanggal ko ang bulb. may umiingay sa bulb housing at nakita ko na natanggal ang ceramic part ng bulb. ito kaya ang dahilan kaya ayaw na mag power ON? last time i've checked, nasa 1800 hrs pa lang ang bulb using econo mode all the time. pero last summer halos buong araw ginagamit ang hd33 na nakakabit sa xbox360.
sana wala ng ibang problema ang unit. umorder na ako ng osram bulb sa amazon, $59 lang.
ito pala pic ng housing at sirang bulb.
(http://i11.photobucket.com/albums/a165/weng2x/P_20170313_174608_zpscdqyador.jpg) (http://s11.photobucket.com/user/weng2x/media/P_20170313_174608_zpscdqyador.jpg.html)
(http://i11.photobucket.com/albums/a165/weng2x/P_20170313_174727_zpsafkcxr8v.jpg) (http://s11.photobucket.com/user/weng2x/media/P_20170313_174727_zpsafkcxr8v.jpg.html)
(http://i11.photobucket.com/albums/a165/weng2x/P_20170313_175617_zpsiegxcioz.jpg) (http://s11.photobucket.com/user/weng2x/media/P_20170313_175617_zpsiegxcioz.jpg.html)
-
Whoa! Its been a while na pala. Akala ko na-repair na hd33 mo. Well, pag lamp ang sira dapat may LED Indications pa rin sa unit...it really has something to do with the power board talaga pag totally dead unit. Yung natanggal sa bulb I think protection cap cya for the terminals it should work even without it. Well let's hope na lang it will work pagdating ng bulb. :)
-
got the new lamp last saturday, tyempo may umuwi na pinsa galing US. installed the bulb carefully sa housing but unfortunately ayaw pa rin mag ON ang unit. i called beyond innovation, sabi nila system check up will cost 3k. i'm afraid to send this in baka malaki ang aabutin pagpapalitan pa ng board. i'm from leyte so shipping thru LBC will cost 1.2k one way (that's what i paid 4 yrs ago pa).
i'm thinking of buying the BenQ W1070 which is on sale now sa amazon at $500. sa tingin ko mas sulit siguro ito kesa ipapagawa ko ang hd33. tama kaya ako?
-
I think max. of 10T magiging gastos mo if iparepair mo yan sa Manila, powerboard should be around 2T, or bka onboard fuse lang papalitan nla jan dpende sa system check report nila.itatawag nmn nila yan bago i-go yan e. Pero in case magback-out ka ng pa-repair due to expensive parts you could still lose at least 6T
But you could still save a lot pag narepair yan compare s plan mo bumili ng $500 W1070, + shipping fee to leyte.
Well its up to you...both have risks din if budget is not the problem e buy new one na lang.
maganda din naman reviews ng W1070.
-
Finally, na repair ang hd33 ko after sitting for a year at Gakken Philippines. Na tyempo nasa manila ako when they called me na okay na kaya personal ko nakita ang pag demo ng technician. Paid 4.5k sa power board and 2.5k sa labor. However, nagloloko ang remote control, ayaw gumana ang ON button at may iba pa na hindi umiilaw. Kaya need e power ON sa unit mismo.
Baka meron sa inyo remote na hindi na ginagamit, bilhin ko :)
Excited to set this up in my unused home theater room
-
wow its been a while since I last visited this site... congratulations on your hd33.
maybe your batteries leaked and damaged the circuit board of your remote. ebay is selling bnew remote for our HD33, it cost around $20.00 from China.
-
wow its been a while since I last visited this site... congratulations on your hd33.
maybe your batteries leaked and damaged the circuit board of your remote. ebay is selling bnew remote for our HD33, it cost around $20.00 from China.
i have stumbled on this thread and saw your reply. bought a replacement remote from amazon for $22 at pina ship ko direct sa pinas. the remote is not original optoma but it does the job. the quality is not like the orig, the plastic is very cheap and no backlight. anyway, i only use the power button.