PinoyDVD: The Pinoy Digital Video & Devices Community
Home Theater => General => HT Picture Gallery => Topic started by: qguy on Feb 18, 2012 at 12:36 PM
-
(https://i.imgur.com/lKu8GVZ.jpeg)
******************************************************************************************
Pandemic Build
DIY PB3000 clone
(https://www.avsforum.com/forum/attachment.php?attachmentid=2746346&d=1592742055)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2746342&d=1592742050)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2746344&d=1592742050)
Mar 2020 Building the BEAST - https://www.pinoydvd.com/index.php/topic,157389.msg2714224.html#msg2714224 (https://www.pinoydvd.com/index.php/topic,157389.msg2714224.html#msg2714224)
July 2018 Update
************************************************************************************************************
Some changes....
Pioneer SX-1250 serving HT and Audio duties,
Audio
Alon Model IV and Rythmik F15 (Both are sealed systems)
HT
JBL L112 and Klipsch SW112 (Both are ported systems)
No Filters, Both speakers are run full range
This is the best setup I have ever had, I always struggled with using one sub for Audio and HT. Audio, lower crossover point vs HT's higher crossover point. Using 2 different sets of speakers for Audio and HT, I no longer have to fiddle with the sub setting. I also enjoy the added benefit of using a ported sub for HT and Sealed for Audio.
(http://i66.tinypic.com/sxeuqw.jpg)
***********************************************************************************************************************
Para iwas sa Alikabok
March 2014
Glass covers for my SX-1980 :)
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7479.jpg)
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7480.jpg)
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7482.jpg)
With the SX-1050
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7483.jpg)May 2012 Update.
I got this unit last April, it WAS dead, no relay click, no sound no anything :(
Operating on the 270 watt per channel beast >:D
Rebuilding the Power Supply Regulator Board
BEFORE
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5934_zpsf02ffee0.jpg)
AFTER
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6085_zps7f2d56b7.jpg)
Tone (Bass and treble) Board
Before
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6086_zps532c89dd.jpg)
AFTER
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6097_zps1a45450e.jpg)
April 2013 update
took some rush photos, hirap iposing at ilipat lipat
My 78 lbs monster...
1979 Pioneer SX-1980
270 WPC @ 8 ohms
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5924_zpsc1e678a5.jpg)
With my 1976 SX-1050 120 WPC
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5922_zps2b32f19f.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5917_zpsa19cf385.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5918_zps8e6b4329.jpg?t=1365316809)
How does it sound.... its very quiet :-), the relay does not click, hehehe I still need to look at the power supply section.
February 2013 Update
Finally decided to join the bandwagon and added a Sony 46 inch LCD screen to my 2."1" Audio Setup
(http://i240.photobucket.com/albums/ff318/skinnercases/nude1_zps1cf226a5.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/fullshot_zpsf11a6f3b.jpg)
1976 Pioneer SX-1050 Receiver
(http://i240.photobucket.com/albums/ff318/skinnercases/sx1050_zps10e49072.jpg)
Rythmik F15 sealed subwoofer
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5357_zps468615d1.jpg)
Usher X-719
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5358_zps60b24d54.jpg)
My favorite part of the cabinet, Volume control knobs for cabinet handles
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5364_zps76bfde56.jpg)
_______________________________________________________
Added August 2012Pioneer SX1050, circa 1976. 120 WPC ;D
(http://i240.photobucket.com/albums/ff318/skinnercases/img_4062.jpg)
"Nude' photos on page 2
Added July 2012
Onkyo Integrated Amplifier solid state, about 65 watts
Infinity RS 4001 (1989 Model), three way with 8 inch woofer
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4034.jpg)
********************************************
ONE amp, ONE sub, ONE pair speaker and ONE source
August 2011
(http://i240.photobucket.com/albums/ff318/skinnercases/audio.jpg)
Speakers :Usher X-719 on DIY 120 Lb stands
Subwoofer : Rythmik F15 kit version
Amplifier : Cayin A-70T, 30 WPC Class A, KT88
Speaker Cables : Xindak SC-01b, 12g Bi-wire.
RCA Cables : DIY Kimber cables
Behind the scenes..actually inside the amp stand
Usb Hub
1 Tb, hard drive
1500 Automatic Voltage Regulator
Source : Acer Netbook into a PHP 150 USB Hub then into a PHP 1500 Behringer UCA202 DAC
-
youre the ONE...........congrats sir, ok set up nu sir! :) :) :)
-
Congrats sir Qguy for the Very Neat "One" setup! :o
You're really " The ONE " !!!... :)
-
Congratulations Benjamin!
-
Nice and neat set up.. Congrats :)
-
nice and neat :).
-
Congrats!!!
Ikaw na!
Ang "The One". ;)
-
Etong setup ang gusto ko...para sa mga pinanganak na semi-hearing impaired, yep, my right ear is deaf. It's been like that since i was born, but i love music very much, i even play the guitar.
Hope to be able to save up and build one of these.
Nice setup sir...you're the ONE!!
-
Congrats sir! ;D awesome set-up
-
Miss you, Benj... ::)
nbc
-
Ikaw pala magtuturo sakin sa source :D congrats nice and simple.
-
I just use iTunes and the netbook with a 5 meter USB cable into the DAC..solved na ako
How is the speaker project ? tapos na ba ?
Ikaw pala magtuturo sakin sa source :D congrats nice and simple.
-
you already!!! ( ikaw na!)
very neat sir!:)
-
Nice gear all in the TOP of heavy stand. :D :D
Congrats!!
-
thanks for all the comments...
actually i was thinking of changing the stands to something like this
(http://i240.photobucket.com/albums/ff318/skinnercases/audiostand.jpg)
-
I just use iTunes and the netbook with a 5 meter USB cable into the DAC..solved na ako
How is the speaker project ? tapos na ba ?
Have you tried a shorter run usb cable? Saem SQ din or improvement?
-
Nice and Simple.....Astig!... :)
Congratz Sir....
Cheers!... :)
-
Nice audio setup sir!
-
have not tried a shorter cable. My listening chair is far from the amp
Have you tried a shorter run usb cable? Saem SQ din or improvement?
-
have not tried a shorter cable. My listening chair is far from the amp
May remote app for netbook. ;)
-
sir yan talaga ang position ng speakers when you listen to them o.inilalayo mo sa wall?
-
mas ok netbook, i can browse pinoydvd.com. may lag din pag android phone
May remote app for netbook. ;)
-
for several months na , i dont bother with pulling the speakers out, although mas maganda yung image when its far from the walls. Right now mas na enjoy ko yung "music" rather than concentrating on the image, most of the time nga nasa tabi ako ng sub, i am not even facing the speakers ;D
sir yan talaga ang position ng speakers when you listen to them o.inilalayo mo sa wall?
-
Simplicity says it all, the result very neat & elegant ;)
-
for several months na , i dont bother with pulling the speakers out, although mas maganda yung image when its far from the walls. Right now mas na enjoy ko yung "music" rather than concentrating on the image, most of the time nga nasa tabi ako ng sub, i am not even facing the speakers ;D
hehe. me, my positioning for the speakers is 3 feet from the back wall and i can surf pdvd and fb while listening. :)
-
Congrats sir! noob question, pano naka integrate yung F15?
-
Integration was pretty much done by ear, I just set the settings to a max of extension 50 hz, high damping and 14 hz extension. Then I just played with the fine crossover knob (I guess I am set at 35-40 hz). I did not use the PEQ, as I was already happy with the results that I was getting.
if you meant how it was connected, then its connected by speaker cable
Congrats sir! noob question, pano naka integrate yung F15?
-
if you meant how it was connected, then its connected by speaker cable
Yes sir i mean yung connection. Wala ata sub preout yung amp, so from amp to sub's line level input then line level out to speakers tama po ba ??? ???
-
Speaker output from amp using speaker wire to speaker inputs ng subwoofer, basically you connect the subwoofer like a regular speaker. Then connect another set of speaker wire to your amp going to your "front/main" speakers.
Yes sir i mean yung connection. Wala ata sub preout yung amp, so from amp to sub's line level input then line level out to speakers tama po ba ??? ???
-
Superb! :)
-
hey Q, how big is the room ? (just curious as i plan to move to a smaller place).
-
Nice Gears! :) congrats!
-
amazing!!! :o
you're the man! este the one man! or the one! ;D
basta yun na yun sir! :D
congrats sir! keep it coming! ;)
-
wow, very neat.. congrats sir..
-
Panalo sir qguy... very very nice.. :)
-
The room is around 10 x 20 feet.
hey Q, how big is the room ? (just curious as i plan to move to a smaller place).
-
thanks !
-
Neat! :o
No plan for acoustic treatment?
-
Not for now... happy camper for the last several months, no itches to upgrade the SQ, the last upgrade was a netbook and dac and this was done out of convenience.
Neat! :o
No plan for acoustic treatment?
-
happiness level!
congrats! 8) 8) 8)
-
Just noticed after almost a year may blue glow na yung Gold Lion KT88 ko...nung bago wala ???
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4002.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4003.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_3999.jpg)
-
Added July 2012
Onkyo Integrated Amplifier solid state, about 65 watts
Infinity RS 4001 (1989 Model), three way with 8 inch woofer
When I got this the infinity, it was in poor shape, tweeter was not working, Enclosure was water damaged and the enclosure was really realy dirty. I almost walked away from purchase, but I said to myself, i traveled about an hour and half to get here might as well get it, when i got home and saw all the damage parts, somehow I got buyers remorse, as it needed a lot of work.... well it paid off... the Solid state Onkyo paired with Infinity was bright, forward and in your face which is a total opposite to the tubed Cayin and Usher combo, basically I get to enjoy a wider variety of music due to the oppsing characters of each combo ...
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4034.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4038.jpg)
before and after shots
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4022.jpg)
still needs masilya, mahirap pala habulin yung color hehehe naka apat na attemp to get the color right
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4026.jpg)
Light oak and special edition "Dark Oak"
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4025.jpg)
-
Congrats! Likewise, I'm torn between S/S class D and tube. :D Both have different characters for different types of music.
Btw, instead of matching the color with the same color ng masilya, you can also try a contrasting color for your masilya.
-
congrats at ganda ng set up :)
-
Thanks, I thought about using black putty, but since not all edges have a problem it would not be balanced, over the weekend, I may just go to a paint specialist and have my putty done there
Btw, instead of matching the color with the same color ng masilya, you can also try a contrasting color for your masilya.
-
Congrats Sir on your New Combi Setup... :o
-
Congrats Bengie! Ok SS new flavor naman, by the way I'm using the interconnects that you lent me, mas bumagay sa setup ko :). Tagal sa sakin to. :D
-
Nice! Congrats! ;)
Try mo din i-partner yung Onkyo amp with the Usher and the Cayin tube amp with the Infinity and see how it will sound. ;D
-
return mo pag sawa ka na ;D wala pa naman akong use sa kanya ...
Congrats Bengie! Ok SS new flavor naman, by the way I'm using the interconnects that you lent me, mas bumagay sa setup ko :). Tagal sa sakin to. :D
-
thanks
Will do that. pero pinagsasawan ko muna yung current setup
Nice! Congrats! ;)
Try mo din i-partner yung Onkyo amp with the Usher and the Cayin tube amp with the Infinity and see how it will sound. ;D
-
Very nice set up, sir! :)
-
Ang bagong flavor of the month Vintage Pioneer Receiver
Pioneer SX1050
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4053.jpg)
Nude with CD for size comparison
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4046.jpg)
With about 20 minutes cleaning :-) , I dare not touch the circuits
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4049.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4048.jpg)
With the rest of the family
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4063.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4064.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/img_4062.jpg)
-
definitely enjoy yan set-up nyo sir :)
-
ngayon may problema.. minsan di ko alam kung anong amp and speaker combo ang gagamitin ko. sa ngayon its just 2 systems as I can not mix and match as the speaker terminations are different for each amp, gusto ko ma try yung Usher sa pioneer as i have not used the Usher in a high powered amp ever...hehehe
definitely enjoy yan set-up nyo sir :)
-
FM night...
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_4066.jpg)
-
ngayon may problema.. minsan di ko alam kung anong amp and speaker combo ang gagamitin ko. sa ngayon its just 2 systems as I can not mix and match as the speaker terminations are different for each amp, gusto ko ma try yung Usher sa pioneer as i have not used the Usher in a high powered amp ever...hehehe
im sure na magandang combo din yan :) that's a good problem to have, may choices ka :)
-
ngayon may problema.. minsan di ko alam kung anong amp and speaker combo ang gagamitin ko. sa ngayon its just 2 systems as I can not mix and match as the speaker terminations are different for each amp, gusto ko ma try yung Usher sa pioneer as i have not used the Usher in a high powered amp ever...hehehe
Nakow. Ibang level yan. ;D Ushers and SFs deserves very powerful amps. Once tried, there's no going back. ;)
-
Parehas lang tau bro. Benjie, audio lang ako mahilig. My sansui alpha 907 & Pioneer m-72 Pioneer c-72 pre power combo sabay kong ginagamit sa one pair of b&w 602 s3 spkr ko.
-
Actually mahilig din ako sa HT, Yung screen size ko is about 50 feet diagonal. I just need to pay 200 to 300 once a week to watch movies. :-). Katabi ko lang kasi yung mga Movie Houses.
Seriously may "HT setup" din ako, pero 2.1 channel lang, HK DVD player , Pioneer amp, Pioneer speakers with JBL subwoofer, but their seldom used for movies, its being used daily by my wife for her aerobic exercise.
Parehas lang tau bro. Benjie, audio lang ako mahilig. My sansui alpha 907 & Pioneer m-72 Pioneer c-72 pre power combo sabay kong ginagamit sa one pair of b&w 602 s3 spkr ko.
-
How were you able to control the gain ng different amps feeding the tweeter and woofer, did you use an electronic crossover ?
Planning to do the same to my Usher X-719, SX1050 (120 watts/ch solid state) for the woofer and Cayin A-70T (30 watts/Ch Tube class A) for the tweets.
Parehas lang tau bro. Benjie, audio lang ako mahilig. My sansui alpha 907 & Pioneer m-72 Pioneer c-72 pre power combo sabay kong ginagamit sa one pair of b&w 602 s3 spkr ko.
-
Sabay lang clang naka set up bale 2 spkr cable ko, one is for a907, another one is for m72+c72 amp. pinagpapalit palit ko lang cla sa isang spkr. hindi ko cla pinapatugtog ng sabay.
-
(http://i196.photobucket.com/albums/aa316/ram_on/NY-2013_zps72bb20f2.gif)
...& More Gears to Come....!
-
happy new year brader......
-
Thanks
happy new year brader......
-
Thanks
anung bagong hakot mo dyan..? for sure meron kang xmas and new year gift sayo? hehe
pm kita kapag magpapaservice ako ng vintage amp ko
ung mga caps na need ireplace baka alam mo kung saan meron OEM/ORIG just in case...
wala kabang binalatan na vintage amp lately?
-
No additional gears for the season, but planning on adding a LCD tv to the mix, para experience ko naman ang HT, sayang yung 15 inch na subwoofer hehehe
Wala pa akong makitang vintage amp lately na type ko restore, hirap maghanap.
The capacitors I get from Watson sa may Raon, mostly Nichicon and Rubycon, you just need to tell them to give you those brands
-
No additional gears for the season, but planning on adding a LCD tv to the mix, para experience ko naman ang HT, sayang yung 15 inch na subwoofer hehehe
Wala pa akong makitang vintage amp lately na type ko restore, hirap maghanap.
The capacitors I get from Watson sa may Raon, mostly Nichicon and Rubycon, you just need to tell them to give you those brands
brader nakasale pa din ata LIS sa mga 40inch
ilang inch ba need mo?
-
Automatic center lang ako pwede bumili, may partnership employer ko with Automatic center, so far Sony KLV 40BX450 is my choice at 27K, may Samsung na plasma na larger and cheaper pero mas mas detailed yung Sony
brader nakasale pa din ata LIS sa mga 40inch
ilang inch ba need mo?
-
Good luck sa purchase sir
-
February 2013 Update
Finally decided to join the bandwagon and added a Sony 46 inch LCD screen to my 2."1" Audio Setup
(http://i240.photobucket.com/albums/ff318/skinnercases/nude1_zps1cf226a5.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/fullshot_zpsf11a6f3b.jpg)
1976 Pioneer SX-1050 Receiver
(http://i240.photobucket.com/albums/ff318/skinnercases/sx1050_zps10e49072.jpg)
Rythmik F15 sealed subwoofer
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5357_zps468615d1.jpg)
Usher X-719
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5358_zps60b24d54.jpg)
My favorite part of the cabinet, Volume control knobs for cabinet handles
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5364_zps76bfde56.jpg)
-
Nice 2.1 set up sir. But it looks like a center speaker, a pair of surround speakers and an AV receiver will be seen in this thread soon. ;)
-
thanks
I doubt it, ok na ako sa 2 channel basta may bass :-)
Nice 2.1 set up sir. But it looks like a center speaker, a pair of surround speakers and an AV receiver will be seen in this thread soon. ;)
-
thanks
I doubt it, ok na ako sa 2 channel basta may bass :-)
For now. ;D It's a process. ;)
-
hahaha dahan dahan ba ang kulam hehehe
For now. ;D It's a process. ;)
-
Haha.... Ganda... Ayaw ba kasi maght hehe sarap ht tapos 2 audiosetup mo hehe
-
thanks for the comments.
Actually I have 5.1 na HTIB, which I just use as a 2 channel setup for watching mga series and regular programs
-
thanks for the comments.
Actually I have 5.1 na HTIB, which I just use as a 2 channel setup for watching mga series and regular programs
used to have complete HT but found it to enjoy best at dedicated HT room. HTIB is enough to fill our room to experience cinema like enviroment. :)
-
nice setup qguy.....i am a fan of the 2.1 system....my altec lansing acs-33 still works after over 12 years....
-
i agree, volume knob handles are just too awesome! O0 congrats master! 8)
-
My 78 lbs monster...
1979 Pioneer SX-1980
270 WPC :o
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5924_zpsc1e678a5.jpg)
With my 1976 SX-1050 120 WPC
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5922_zps2b32f19f.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5917_zpsa19cf385.jpg)
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5918_zps8e6b4329.jpg?t=1365316809)
How does it sound.... its very quiet :-), the relay does not click, hehehe I still need to look at the power supply section.
-
Congrats on your new silent amp. ;D I'm hoping umingay and mag-make music yan. Sana relay lang.
-
Huwaww ... What a nice Pioneer Vintage Receiver there bro.. Nice Catch.
-
Wow monster amp...270/channel...congratulations bro
-
you can try the output offset adjustment pots on the power amp boards, if you can get to adjust them at less than +-100mV, the relay will click....
-
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5918_zps8e6b4329.jpg?t=1365316809)
How does it sound.... its very quiet :-), the relay does not click, hehehe I still need to look at the power supply section.
quiet, open and airy... my kind of amp! ;D
great catch bro! good luck on the rebuild!
-
Thanks for the Tip. I read about that, I will be downloading the service manual and maybe do it after a couple of days, pag di na ngalay ang arms ko
you can try the output offset adjustment pots on the power amp boards, if you can get to adjust them at less than +-100mV, the relay will click....
-
WOW may bago ka nang Baby, Monster >:D nga lang hehehe, Congrats sana mag ingay na yan :)
-
That's one big amp, Nice one :)
-
link.....http://www.hifiengine.com/library/pioneer/sx-1980.shtml
Thanks for the Tip. I read about that, I will be downloading the service manual and maybe do it after a couple of days, pag di na ngalay ang arms ko
-
Pag umandar na ito.. pwede ko na palang bi-amp yung Usher ko
270 watts sa woofer
120 watts sa tweeter
bwahahahaha
-
Pag umandar na ito.. pwede ko na palang bi-amp yung Usher ko
270 watts sa woofer
120 watts sa tweeter
bwahahahaha
Kaya yan sir. Iba ang delivery ng speaker pag ang limit eh mechanical na and not the amp power. Like what they say when over amplified..every ounce is squeezed to the last drop. Ingat lang sa volume control. Kaput yang tweeter agad pag nasobrahan.
-
My dream receiver, sx-1980, one of the best if not the best! Congrats bro! ;)
-
nakapost na pala sa thread mo din....270watter pala yan per channel, i thought less than 200...but happy that you got it.... :)
review na lang bro after you revive it back to life.....big C again as in congratulations.... :)
-
nakapost na pala sa thread mo din....270watter pala yan per channel, i thought less than 200...but happy that you got it.... :)
review na lang bro after you revive it back to life.....big C again as in congratulations.... :)
eto na ba yun boss darws? kinuha na ni bossing Q? :)
-
eto na ba yun boss darws? kinuha na ni bossing Q? :)
yes king doods.....di makatulog sa gabi sa kakaisip....hehehe.....laki ng headroom,270/channel......
-
di makatulog sa gabi sa kakaisip....hehehe.....laki ng headroom,270/channel......
hahaha
Thanks again sa tip !!!
-
My dream receiver, sx-1980, one of the best if not the best! Congrats bro! ;)
Inggit aku...
:'(
-
hahaha
Thanks again sa tip !!!
wala ba akong tip? :D :D :D ygpm....hahaha
-
Inggit aku...
:'(
di bali, may monster sub ka naman brader...hihihi
-
Pag umandar na ito.. pwede ko na palang bi-amp yung Usher ko
270 watts sa woofer
120 watts sa tweeter
bwahahahaha
bridge the 270 watter to drive your sub(you will have to disconnect the plate amps)....the 120 watter for the mids and highs....
-
please reserve...:-)
-
next in line.....:D
-
The SX1050 is BIG, The SX1980 is HUGE !!!
That's one big amp, Nice one :)
-
Infinity RS 4001 ?!!
i am on heavy drooooool mode !! congratulations, sir qguy !!!
-
the SX1980 you got there is a true gem of an amplifier. fantastic.
-
Thanks for all the comments, the good thing about getting this beast is that I have stopped looking at the buy and sell section ..............
for now :)
-
Ilang watts kaya ito pag bridge mode ? hehehehe
bridge the 270 watter to drive your sub(you will have to disconnect the plate amps)....the 120 watter for the mids and highs....
-
Baka may efren or kapatid pa yan Pioneer sx 1980 mo Benjie pls let me know..
-
Will let you know..
Baka may efren or kapatid pa yan Pioneer sx 1980 mo Benjie pls let me know..
-
Ilang watts kaya ito pag bridge mode ? hehehehe
540 watts...
-
I had the assumption that it would be more, as some of the bridgeable amps I have read about has more power when bridged compared to the total of the 2 channels.
540 watts...
-
I had the assumption that it would be more, as some of the bridgeable amps I have read about has more power when bridged compared to the total of the 2 channels.
possible, but since you are using the same power traffo, power is not quadrupled as in theory but only doubled practically....
-
Ilang watts kaya ito pag bridge mode ? hehehehe
the amp section has a power limiter that activates when output power reaches 300 watts into 4 ohms, so you'll be able to get 600 W bridged into 8 ohms.
-
May 2012 Update.
I got this unit last April, it WAS dead, no relay click, no sound no anything :(
Operating on the 270 watt per channel beast >:D
Rebuilding the Power Supply Regulator Board
BEFORE
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5934_zpsf02ffee0.jpg)
AFTER
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6085_zps7f2d56b7.jpg)
Tone (Bass and treble) Board
Before
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6086_zps532c89dd.jpg)
April 2013 update
AFTER
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6097_zps1a45450e.jpg)
-
keep it coming bro.........konting himas mo na lang at magkakamalay na yan..... :)
-
Marami pang himas yan hehehehehe, muntik ko pang mabasag yung front panel glass, I lifted the front panel kanina from the floor, tapos pagtingin ko, wala yung glass, akala ko nasa floor, tapos wala, yun pala pa swing swing na lang siya sa front panel, konting glue na lang ang nakakapit.
keep it coming bro.........konting himas mo na lang at magkakamalay na yan..... :)
-
Power amp board capacitor replacement
Three capacitors lang per channel. pero todo nervious ko dito, as the Bias diode and output transistors are no longer in production.
Before
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6104_zpsc2a842a9.jpg)
After
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6103_zpsc349b74b.jpg)
-
Did some cleaning and most of the dust is gone
Before
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_5918_zps8e6b4329.jpg?t=1365316809)
after
(http://i240.photobucket.com/albums/ff318/skinnercases/IMG_6107_zps67a26b3e.jpg)
-
Power amp board capacitor replacement
Three capacitors lang per channel. pero todo nervious ko dito, as the Bias diode and output transistors are no longer in production.
do you need to replace output trannies?, i have ON semis MJ21193/MJ21194 if you need them...
-
I dont think so.
Thanks for the offer, but it does not use that type of transistor. It uses this one 2SD746A & 2SB706A
do you need to replace output trannies?, i have ON semis MJ21193/MJ21194 if you need them...
-
I dont think so.
Thanks for the offer, but it does not use that type of transistor. It uses this one 2SD746A & 2SB706A
no problem, the 2sd746 is available at Newport for 300bucks...http://newportelec.com/transistor_2sd.html
-
I think their different, mine has 4 legs, I checked the 2sd746 and it has three legs.
-
I think their different, mine has 4 legs, I checked the 2sd746 and it has three legs.
indeed they are, i was thinking metal TO-3's but actually they are plastic packaged and the 4 legs is because two collectors are brought out, they are high speed output trannies...if you can not find them you will be forced to mod your amp..how many devices do you need?
-
For now none, as long as I dont screw up anything. Pulls are occasionally available at ebay and some vintage suppliers but their $$$. Each channel has 6 output trannies
indeed they are, i was thinking metal TO-3's but actually they are plastic packaged and the 4 legs is because two collectors are brought out, they are high speed output trannies...if you can not find them you will be forced to mod your amp..how many devices do you need?
-
For now none, as long as I dont screw up anything. Pulls are occasionally available at ebay and some vintage suppliers but their $$$. Each channel has 6 output trannies
Sanken has MT200 type power trannies that are just as good, 3 legged trannies are ok to use in case you will need to replace them.....
my experience with pioneers is that they are easier to repair, hindi sirain compared to Sansui's....
-
True, plus the boards are well spaced and if you have a problem with the volume or tone controls, its easy to find which board has the problem.
Sanken has MT200 type power trannies that are just as good, 3 legged trannies are ok to use in case you will need to replace them.....
my experience with pioneers is that they are easier to repair, hindi sirain compared to Sansui's....
-
yes, for better serviceability i will give these Pioneer amps a high mark....:D
-
Argh !!!! Ayaw mag bias left channel , di ako pinapansin ng trimmer, kahit anong pihit ko.. 0.000 volts
-
Argh !!!! Ayaw mag bias left channel , di ako pinapansin ng trimmer, kahit anong pihit ko.. 0.000 volts
any update brader? still waiting for your monster amp to revive.........
-
Argh !!!! Ayaw mag bias left channel , di ako pinapansin ng trimmer, kahit anong pihit ko.. 0.000 volts
baka open na yung power resistor
-
I checked the resistors, caps and diodes their all fine, could be a transistor on its last leg
baka open na yung power resistor
-
Decided to place my SX1980 on display, display lang still have issues with the power supply. Parang biglang lumiit yung 50 pounder na SX1050.
(http://i70.photobucket.com/albums/i113/nandopsis/Picture003.jpg)
(http://i70.photobucket.com/albums/i113/nandopsis/Picture002.jpg)
-
Wow.....bet those monsters sound great.
-
Nangingintab.... 8) Parang mga bago... :)
-
I like it. :D, ang daming knobs :) :) , dapat may close up shots ;D ;D
-
I think their different, mine has 4 legs, I checked the 2sd746 and it has three legs.
http://www.audiokarma.org/forums/showthread.php?t=60536 (http://www.audiokarma.org/forums/showthread.php?t=60536)
-
Thats the alternative transistor for the SX1980.
http://www.audiokarma.org/forums/showthread.php?t=60536 (http://www.audiokarma.org/forums/showthread.php?t=60536)
-
thanks... sa ilaw ng flash, kita lahat ng dumi hehehe linisin ko muna bago close up pics.
I like it. :D, ang daming knobs :) :) , dapat may close up shots ;D ;D
-
Thats the alternative transistor for the SX1980.
I was just thinking if you can consider them as replacement for the output transistors since even the guys from diyaudio and audiokarma are having difficulties in sourcing out the original ones (4 legs)...
Just my 2 centavos... ;D
-
YES, you can as several units have done the transistor replacement.
I was just thinking if you can consider them as replacement for the output transistors since even the guys from diyaudio and audiokarma are having difficulties in sourcing out the original ones (4 legs)...
Just my 2 centavos... ;D
-
Para iwas sa Alikabok
Glass covers for my SX-1980 :)
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7479.jpg)
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7480.jpg)
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7482.jpg)
With the SX-1050
(http://i70.photobucket.com/albums/i113/nandopsis/IMG_7483.jpg)
-
Nice.....
-
Ganda Benj :)
-
530 days, 14 hours, 36 minutes and 2 seconds na walang upgrade
(http://i70.photobucket.com/albums/i113/nandopsis/640px-Pr-warclock.jpg)
-
530 days, 14 hours, 36 minutes and 2 seconds na walang upgrade
(http://i70.photobucket.com/albums/i113/nandopsis/640px-Pr-warclock.jpg)
Congrats pa din!!!!
-
Some changes....
Pioneer SX-1250 serving HT and Audio duties, No Filters, Both speakers are run full range
Audio
Alon Model IV and Rythmik F15 (Both are sealed systems)
HT
JBL L112 and Klipsch SW112 (Both are ported systems)
This is the best setup I have ever had, I always struggled with using one sub for Audio and HT. Audio, lower crossover point vs HT's higher crossover point. Using 2 different sets of speakers for Audio and HT, I no longer have to fiddle with the sub setting. I also enjoy the added benefit of using a ported sub for HT and Sealed for Audio.
(http://i66.tinypic.com/sxeuqw.jpg)
-
Building the Beast
Enclosure : Slot ported, 26.5 x 25.5 x 21.5 (L x W x H), tuned to 15Hz/20 Hz
Driver: 18 Dayton PA-460, 500 watts. PB12-NSD in the background
(https://www.avsforum.com/forum/attachment.php?attachmentid=2687986&d=1582300602)
Panels are cut. I used Baltic Birch ply
(https://www.avsforum.com/forum/attachment.php?attachmentid=2695826&d=1583850528)
Assembly- External volume is 8.28 cubic feet
(https://www.avsforum.com/forum/attachment.php?attachmentid=2695828&d=1583850545)
Test fitting the driver, it dwarfs my 15 inch sub
(https://www.avsforum.com/forum/attachment.php?attachmentid=2696878&d=1584035352)
When you only have one clamp, enlist the help of your loudspeakers and sub
(https://www.avsforum.com/forum/attachment.php?attachmentid=2697556&d=1584198865)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2697598&d=1584199258)
Testing and size comparison with PB12-NSD
(https://www.avsforum.com/forum/attachment.php?attachmentid=2697558&d=1584198871)
Ok, So I $uck at staining wood :) I will refinish this once I can get supplies after the lockdown
(https://www.avsforum.com/forum/attachment.php?attachmentid=2698548&stc=1&d=1584371543)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2698550&stc=1&d=1584371543)
The Sound - Checkout the marketplace, there could be a PB12-NSD for sale soon >:D
-
Galing ng halimaw mo bro. ;D Ano ang power (amp) compliment nito sir?
-
Wow grabe naman to..
-
Parasound HCA-1200II Bridge mono at 650 watts
Galing ng halimaw mo bro. ;D Ano ang power (amp) compliment nito sir?
-
Was not really happy with the finish, so decided to go black
(https://www.avsforum.com/forum/attachment.php?attachmentid=2700872&stc=1&d=1584968047)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2700874&stc=1&d=1584968047)
-
For size comparison, SVS PB12-NSD on top
(https://www.avsforum.com/forum/attachment.php?attachmentid=2726670&d=1589566604)
-
DIY braided speaker cable, effective gauge 6.0, Each driver gets gauge 11. Made from Canare 4S11, bi-wire cable
Pictured with regular power cord
(https://www.avsforum.com/forum/attachment.php?attachmentid=2735144&d=1590941008)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2735146&d=1590941016)
-
Was not really happy with the finish, so decided to go black
(https://www.avsforum.com/forum/attachment.php?attachmentid=2700872&stc=1&d=1584968047)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2700874&stc=1&d=1584968047)
once you go black you'll never go back :D :D
-
Pandemic Build
DIY PB3000 clone
(https://www.avsforum.com/forum/attachment.php?attachmentid=2746346&d=1592742055)
(https://www.avsforum.com/forum/attachment.php?attachmentid=2746344&d=1592742050)
-
Added Acoustic Energy Compact 1 to the lineup :)
(https://i.imgur.com/lKu8GVZ.jpeg)