PinoyDVD: The Pinoy Digital Video & Devices Community

Home Theater => Audio => Speakers => Topic started by: zereque on Aug 17, 2015 at 11:45 AM

Title: Passive speakers to Active Sub
Post by: zereque on Aug 17, 2015 at 11:45 AM

Hi guys,

May tanong lang po ako, Pwede ko po bang gamitin ang Passive Speaker ko na Kenwood around 30 Watts to my Edifier - M3300SF 12W x2 + 30 W ang specs nya.

Sira na kasi ang left channel,. so it is possible na gamitin ko ang passive speakers sa Edifier powered sub? 

Thanks and more power Pinoy DVD

Regards,
Rasell :)

Title: Re: Passive speakers to Active Sub
Post by: cyberdraven on Aug 17, 2015 at 01:09 PM

Wag ka sa watts tumingin sir.kailangan tama impedence at values ng passives.  Your best best if to restore the existing passives nalang.  Buy caps of the same capacitance.  Also, pa check mo din baka me kailangan lang ihinang sa connectors.

Title: Re: Passive speakers to Active Sub
Post by: markcrenz on Aug 17, 2015 at 10:18 PM

Small 2.1 systems usually have 4 ohm sats and im guessing your kenwoods are 4-8 ohms, so most likely pwede.

Quote from: cyberdraven on Aug 17, 2015 at 01:09 PM

Buy caps of the same capacitance.

para saan caps?

Title: Re: Passive speakers to Active Sub
Post by: zereque on Aug 18, 2015 at 11:56 AM

its 8 ohms mga sir, so i just need a wire(speakers) to RCA (active sub)  para magamit ko yung Bookshelf speakers?

Thanks sa mga info mga sir, :)

Title: Re: Passive speakers to Active Sub
Post by: markcrenz on Aug 18, 2015 at 01:17 PM

Yes. Siguraduhin mo lang matino yung RCA wires na ikakabit sa Edifier amp outputs to speakers.

Title: Re: Passive speakers to Active Sub
Post by: zereque on Aug 18, 2015 at 03:49 PM

Mga sir

thanks sa pagsagot sa post ko,. just to make sure lang, ito po ang full spec ng Edifier ko,

RMS 12W x 2 + 30W x 1
Subwoofer / bass unit: 6½ inch (166mm), Magnetically shielded, 8ohms
Midrange / high unit: 3 inch (78mm), Magnetically shielded, 4ohms
Tweeter unit: 10mm, Magnetically shielded, 4ohms
Impedance: 10K ohms
Signal to Noise Ratio(SNR) >=85dBA


At sa Kenwood naman 30 Watts 8 Ohms