Post by: nvektus on Jan 27, 2009 at 01:43 PM
version 1 - around 2009
screen is diy 113" 2.37:1 CIH.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/front.jpg)
monitor audio rs6 for the front ht and dedicated 2-channel listening. wharf 9.2 for those karaoke nights.. ;D
monitor audio rslcr center and rsfx for surrounds.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/speakers.jpg)
svs pci 25-31 sub..
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/svs_rs1.jpg)
monitor audio rsfx
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/surround.jpg)
monitor audio rs1 for rear surrounds and panasonic ax200 with anamorphic lens.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/projector.jpg)
denon avr-2808ci
adcom gfp-750 (for critical 2-channel listening, w/ ht bypass)
rotel rmb-1075
rotel rb-1080
rotel rcd-1072
panasonic bd35
oppo 983h
egreat nmt
mediacom karaoke
behind the scene is a huge 5kva avr
(http://i476.photobucket.com/albums/rr122/nvektus/Misc/av_rack.jpg)
motorized pop-up lcd...
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/popup_tv.gif)
Post by: Superman on Jan 27, 2009 at 01:51 PM
Post by: et414 on Jan 27, 2009 at 02:03 PM
Post by: ricky on Jan 27, 2009 at 02:52 PM
Post by: gunblade977 on Jan 27, 2009 at 02:55 PM
Post by: jerix on Jan 27, 2009 at 02:57 PM
Post by: blackie on Jan 27, 2009 at 02:59 PM
Cheers! Saya siguro karaoke nights there :D :D :D
Post by: iiinas on Jan 27, 2009 at 02:59 PM
very nice gears sir! sarap manood dyan!
congrats! :o :o :o
Post by: praktikal on Jan 27, 2009 at 03:12 PM
Post by: nvektus on Jan 27, 2009 at 03:18 PM
Wow sir ang ganda! COngrats on the setup. Are those motorized lcd stands locally sourced?
sir, i'm not sure if they're available locally? the motor i used is called an actuator which i bought in the US.
Bro -- Nice setup! where'd you got your ana lens bro? I notice your screen is not curved.
i got my budget lens from http://www.hometheaterbrothers.com/
you only need a curved screen if your throw ratio is on the low side. i have a high 2.x throw ratio and was advised that if i did a curved screen, i would get the opposite of pin cushion which is barrel distortion. the video i get is really amazing! of course, to my non-videophile eyes.. :D
ala e wala namang ganyanan... kung nahiya ka pa dyan e papano na ang sa akin? kaganda ng setup eh! :o
lahat naman sir maganda dahil pinaghirapan. :)
Post by: streetsmart on Jan 27, 2009 at 03:51 PM
Have you looked at the acoustic panels of Toslink? I think they would do wonders for your room.
But what I like best is the ship. ;D ;D
Post by: praktikal on Jan 27, 2009 at 03:56 PM
Wow sir ang ganda! COngrats on the setup. Are those motorized lcd stands locally sourced?
pwede i-DIY yan ;D
ipasok si Inday sa loob ng cabinet! ;D ;D ;D
Post by: wanderer on Jan 27, 2009 at 04:16 PM
Paglaki ko sana ganyan din mga gears ko :D Congrats!
Post by: nvektus on Jan 27, 2009 at 04:23 PM
Very nice set-up! Great choices of gear, especially the Denon 2808! ;D
Have you looked at the acoustic panels of Toslink? I think they would do wonders for your room.
But what I like best is the ship. ;D ;D
i think the denon's 110w sounds just as good as the rotel's 200w.. :)
i'm sure acoustics will do wonders.. but being that it's a family room, it's kind of hard especially with a 4 yr old that's bouncing around the walls all the time and likes to get his hands into everything.. ;D
thanks for the compliment sir... especially with the magellan ship! :D
Post by: nvektus on Jan 27, 2009 at 04:27 PM
pwede i-DIY yan ;D
ipasok si Inday sa loob ng cabinet! ;D ;D ;D
just be careful kung saan pipindot for up and down...baka masira WAF! ;D
Post by: nvektus on Jan 27, 2009 at 04:28 PM
Wow! Great setup.
Paglaki ko sana ganyan din mga gears ko :D Congrats!
tnx for the compliment sir! :)
Post by: audiojunkie on Jan 27, 2009 at 04:38 PM
Congratz sir nvektus!... :o ;D ;D ;D
Post by: praktikal on Jan 27, 2009 at 04:39 PM
just be careful kung saan pipindot for up and down...baka masira WAF! ;D
ngeayy!!! ;D ::)
Post by: blue_123 on Jan 27, 2009 at 04:44 PM
Nakatago pa yung RS1 sa likod ng projector :D Congrats!
Post by: nvektus on Jan 27, 2009 at 04:46 PM
Post by: praktikal on Jan 27, 2009 at 05:01 PM
pwede i-DIY yan ;D
ipasok si Inday sa loob ng cabinet! ;D ;D ;D
kaso kapag ang LCD ay akyat-baba, ah... may kasama na si Inday ::) ::)
Post by: nvektus on Jan 27, 2009 at 05:07 PM
kaso kapag ang LCD ay akyat-baba, ah... may kasama na si Inday ::) ::)
di na kasya sa loob ng cabinet sir! :D ;D
Post by: juanch on Jan 27, 2009 at 06:04 PM
Lupet talaga set-up mo brader
Post by: docelmo on Jan 27, 2009 at 06:20 PM
;D ;D ;D
Post by: nvektus on Jan 27, 2009 at 06:27 PM
Post by: et414 on Jan 27, 2009 at 06:49 PM
Post by: nvektus on Jan 27, 2009 at 06:57 PM
ilang inches yung lcd mo?
16" 16:9 lang sir. good enough for karaoke and o.s.d. ng mga components. :)
Post by: jojitv on Jan 27, 2009 at 06:58 PM
Post by: nvektus on Jan 27, 2009 at 07:02 PM
Wow! :o :o :o
thanks sir! :)
Post by: czrocker on Jan 27, 2009 at 07:18 PM
Post by: et414 on Jan 27, 2009 at 07:28 PM
Post by: nvektus on Jan 27, 2009 at 07:30 PM
at last joel !!! i've been waiting for your gear to be posted here !!!! rock & roll sir !!!!! ;D
yes sir, thanks again for the trade! i've been putting the wharf 9.2 to good use! :D
Post by: nvektus on Jan 27, 2009 at 07:36 PM
cool :) yung cabinet top ba automatic din nagoopen or you gave to open it manually before you raise the screen?
the top of the screen pushes it up when it opens. it leans or sits at an angle on the back of the screen just enough that it doesn't fall back. when the screen comes down, the top goes with the screen until it sits flat again. :)
Post by: threadlock on Jan 27, 2009 at 07:56 PM
Nice and clean setup! The room looks very spacious.
Yung fronts ko surrounds lang sayo?! :o ;D
Post by: czrocker on Jan 27, 2009 at 08:01 PM
yes sir, thanks again for the trade! i've been putting the wharf 9.2 to good use! :D
same here sir with the kh1000 :D
Post by: nvektus on Jan 27, 2009 at 08:07 PM
wala bang solo pic ng sub? ;D
Nice and clean setup! The room looks very spacious.
Yung fronts ko surrounds lang sayo?! :o ;D
the looks of the sub is nothing to brag about... doesn't compare to how good it sounds when watching some thundering scenes in a movie. :) thanks for the compliment sir... the rs1 is no slouch even as fronts! :)
Post by: audi on Jan 27, 2009 at 08:13 PM
di ko napigilang hindi ipakita sa mga officemate ko na nagbabalak mag set up ang picture ng set-up nyo!
Congrats sir!
Post by: Mr.H on Jan 27, 2009 at 08:16 PM
ang lufit sir!!! :o :o :o
congrats and welcome to PDVD!!! :D ;) ;D
Post by: nvektus on Jan 27, 2009 at 08:18 PM
Post by: milken on Jan 27, 2009 at 08:59 PM
Post by: streetsmart on Jan 27, 2009 at 09:31 PM
i think the denon's 110w sounds just as good as the rotel's 200w.. :)
The Denon AVR is excellent. I myself have pretty good power amps -- Aragon and Bryston. But it's probably impossible to tell the difference between their sound and my Denon 3808. I also tried a Lexicon power amp vs. a Denon 2808 and again, you really couldn't tell the difference. Maybe, one day, I will organize a blind test on power amps. Seriously. :) :)
i'm sure acoustics will do wonders.. but being that it's a family room, it's kind of hard especially with a 4 yr old that's bouncing around the walls all the time and likes to get his hands into everything.. ;D
If you're really serious, you could mount it on the junction of ceiling and wall. Your kids won't be able to reach them. ;D ;D
(http://i208.photobucket.com/albums/bb190/streetsmart88/5traps.jpg)
Anyhow, I really love your model ship. I used to collect and build those too. But that was almost 40 years ago. ;D ;D
Post by: tikboy90 on Jan 28, 2009 at 12:09 AM
Post by: Huddaf on Jan 28, 2009 at 12:51 AM
Galing galing! ;)
Post by: nvektus on Jan 28, 2009 at 11:49 AM
The Denon AVR is excellent. I myself have pretty good power amps -- Aragon and Bryston. But it's probably impossible to tell the difference between their sound and my Denon 3808. I also tried a Lexicon power amp vs. a Denon 2808 and again, you really couldn't tell the difference. Maybe, one day, I will organize a blind test on power amps. Seriously. :) :)
If you're really serious, you could mount it on the junction of ceiling and wall. Your kids won't be able to reach them. ;D ;D
Anyhow, I really love your model ship. I used to collect and build those too. But that was almost 40 years ago. ;D ;D
i remember seeing or reading about your denon 2808 back then lurking around pdvd... then a few months later i bought my 2808. :D also everytime i see your ht here it always makes me go WOW! wish i have gears and room like that. :o if i hang something like that on the ceiling of our family room, i'll never hear the end of it from my better half. ;D
Post by: nvektus on Jan 28, 2009 at 11:55 AM
Nice! Ganda! Pic na lang ng sub and the entire system in action.
Galing galing! ;)
here it is sir. i'll see if i have time to take some screenshots tonight. :)
(http://i476.photobucket.com/albums/rr122/nvektus/svs_rs1.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/svs.jpg)
Post by: nvektus on Jan 28, 2009 at 11:57 AM
cool :) yung cabinet top ba automatic din nagoopen or you gave to open it manually before you raise the screen?
(http://i476.photobucket.com/albums/rr122/nvektus/popup_tv.gif)
Post by: praktikal on Jan 28, 2009 at 12:00 PM
(http://i476.photobucket.com/albums/rr122/nvektus/popup_tv.gif)
buti di nakita kamay ni Inday ;D
Post by: Will Wallace on Jan 28, 2009 at 12:11 PM
Post by: nvektus on Jan 28, 2009 at 12:18 PM
buti di nakita kamay ni Inday ;D
;D ;D ;D
Post by: nvektus on Jan 28, 2009 at 12:22 PM
SIMPLE!? Paano naging simple ito? Ang ganda! Nice geeers also. My set-up is "junk" compared to this. ;D
di naman sir! my very first setup was bose and proud na proud ako. :) tnx for the compliments.
Post by: audiojunkie on Jan 28, 2009 at 01:08 PM
(http://i476.photobucket.com/albums/rr122/nvektus/popup_tv.gif)
congratz, again! bro... very nice concept... ;D
actually, we installed same display panel system in one of our key projects for a guest room... ;D
Post by: streetsmart on Jan 28, 2009 at 01:13 PM
But the kids don't play with it? ;D
Have you done a professional calibration of your pj?
So .. when is the EB? :) :)
Post by: nvektus on Jan 28, 2009 at 02:36 PM
I'm sure that the SVS sub performs well. Ang ganda ng mga review nya. :)
But the kids don't play with it? ;D
Have you done a professional calibration of your pj?
So .. when is the EB? :) :)
i haven't done any calibrations with the pj at all sir! >:( i want to at least calibrate it with dve but just couldn't find the time to buy the disc. :D it looks great to me though even with just the preset's. i guess it's a good thing that i'm not a videophile. ;D
Post by: JAQY888 on Jan 28, 2009 at 03:12 PM
Congratz !!!!! ;)
Post by: Lancito on Jan 28, 2009 at 08:48 PM
Post by: ǝʞɐɾ ʎzzɐɾ on Jan 28, 2009 at 10:06 PM
Post by: alvinh on Jan 29, 2009 at 01:25 AM
I agree with most comments from the braders here...simple? Far cry from it. I can only imagine what could happen when you upgrade. :D
Ganda!
Congrats!
Post by: accastil on Jan 29, 2009 at 03:05 AM
Post by: titopepe on Jan 29, 2009 at 06:31 AM
(http://i476.photobucket.com/albums/rr122/nvektus/av_rack.jpg)
halos same tayo ng dimension ng ginawa ah.
Post by: nvektus on Jan 29, 2009 at 10:25 AM
sir ano size ng cabinet nito?
halos same tayo ng dimension ng ginawa ah.
73"w x 28"h x 20"d sir.
thanks again for all the compliments. :)
Post by: deo on Jan 29, 2009 at 01:10 PM
hehehe!! congrats sir! nice setup! pede jan mag "secret" EB. ;D
Post by: Lancito on Jan 30, 2009 at 11:21 AM
Thanks.
Lancito
Post by: nvektus on Jan 30, 2009 at 11:56 AM
tnx for the compliments blu-ray deo. :)
Post by: deo on Jan 30, 2009 at 03:18 PM
Anyhow, I really love your model ship. I used to collect and build those too. But that was almost 40 years ago. ;D ;D
Ngayon southborder CDs and DVDs na ang kino-collect ni boss streetsmart ;D Peace!
Post by: ramsey on Jan 30, 2009 at 03:39 PM
Post by: streetsmart on Jan 30, 2009 at 03:43 PM
Ngayon southborder CDs and DVDs na ang kino-collect ni boss streetsmart ;D Peace!
Pambihira naman ito. Pinaalala na naman ang mga bad trip. >:(
War! ;D ;D
Post by: nvektus on Feb 02, 2009 at 12:09 PM
Sir how's the performance of the sub? Kaya ba payanigin room mo?
kaya sir, especially walang acoustic treatment room ko... you don't get that tight bass instead yumayanig talaga mga walls kala mo magigiba na, lol! ;D
Post by: John E. on Feb 05, 2009 at 04:42 AM
Post by: Lancito on Feb 05, 2009 at 10:06 AM
Post by: nvektus on Feb 05, 2009 at 03:05 PM
WOW! nice HT congrats! ;D
salamat sir! :)
Post by: nvektus on Feb 05, 2009 at 03:08 PM
bro Nvektus, what brand of speaker cable are you using for the fronts? I like.
hi lance, it's a diy canare star quad cable.
(http://i476.photobucket.com/albums/rr122/nvektus/Misc/IMG_0677.jpg)
Post by: XXXyzledge on Feb 05, 2009 at 03:26 PM
ASTIG!
congrats bro!
Post by: Lancito on Feb 05, 2009 at 03:30 PM
hi lance, it's a diy canare star quad cable.
(http://i476.photobucket.com/albums/rr122/nvektus/IMG_0677.jpg)
Naku, I like talaga. My goodness naiinggit ako.
Post by: nvektus on Feb 05, 2009 at 03:38 PM
gandang setup nito!
ASTIG!
congrats bro!
Naku, I like talaga. My goodness naiinggit ako.
thanks sa compliments! :)
Post by: audiojunkie on Feb 05, 2009 at 06:31 PM
Naku, I like talaga. My goodness naiinggit ako.
brader lance, buti ka pa naiinggit lang.... :o :o :o ako naglalaway pa.... ::) ::) ::) ;D
Post by: Lancito on Feb 05, 2009 at 09:20 PM
brader lance, buti ka pa naiinggit lang.... :o :o :o ako naglalaway pa.... ::) ::) ::) ;D
Bro, pahiramin kita panyo. ;D
Post by: audiojunkie on Feb 05, 2009 at 10:25 PM
Bro, pahiramin kita panyo. ;D
bro, samahan mo ng batya pangsahod piga.... o kaya towel na lang.... :o :o :o ;D ;D ;D
Post by: nvektus on Feb 01, 2010 at 03:59 PM
Post by: Onkyo606 on Feb 01, 2010 at 04:28 PM
Post by: sultan72 on Feb 02, 2010 at 02:19 PM
where and how much did u get the acer media server and the media storage..?
thanks
Post by: nvektus on Feb 03, 2010 at 08:49 AM
nice gears sir!
where and how much did u get the acer media server and the media storage..?
thanks
bought it at www.newegg.com sir. can't remember how much but you can check it out at newegg :)
Post by: disturbed on Feb 03, 2010 at 09:04 AM
pag nanalo ako sa lotto gagayahin ko yan :D
congrats sir ;)
Post by: zerukul on Feb 03, 2010 at 09:38 AM
Post by: John E. on Feb 03, 2010 at 09:40 AM
ang ganda-ganda ng setup! nakakaaliw ung pop-up na lcd! hehe ewan nlang kung kukulangin ka pa ng storage.. :D
mala server brader dann ;)
Post by: eksi on Feb 12, 2010 at 08:04 AM
Post by: SETUP™ on Feb 12, 2010 at 02:47 PM
Post by: nvektus on Apr 11, 2017 at 07:43 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_1923_800x600.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/P1030977.jpg)
------------------------------------------------------------------------------------------------------
version 3 - start build 2015
for the speakers, i sold all my monitor audio speakers and decided to go the diy route.
diysoundgroup fusion 12 tempest - front
diysoundgroup fusion 8 alchemy - center
i sold my epik subs and decided to go diy as well. dual subs are 2x dayton audio rss390hf-4 15"
in a 4cuft diy sealed box each.
8x diysoundgroup volt 6 for surround and atmos speakers.
denon x4100 (this one is up for sale... someone buy it so i could upgrade :-))
rotel rmb-1075
rotel rb-1080
3x crown xls-1002 - (4 channels to complete a 7.2.4 future pre/pro upgrade. extra 2 channel is for videoke)
crown xls-1502 to power the dual diy subwoofer.
sony vplhw45es - hd projector'
screen - my current 65" lg hd led behind a projector screen. a 150" elite screen manual pull down
will be cut to make a 128" (16:9)fixed frame with a diy masking system for a 120" (2.35:1) cinemascope.
so it depends which screen i want to use, the fixed pj screen will be travelling up and down and the
masking system to make the screen 16:9 or 2.35. it will all be controlled by a remote.
sketches for the new ht... front screen, seating, and columns.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/front%20stage3skp.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/surround_pillars.jpg)
demo started
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20160822_193548_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20160822_193535_800x449.jpg)
Post by: comet on Apr 11, 2017 at 10:23 PM
Post by: nvektus on Apr 12, 2017 at 07:44 AM
nice sir! kayo na rin kumabit nung mga diy speakers nyo pati crossover?
i assembled all the boxes and soldered the crossovers except for the fusion 12. the crossovers for those are sold pre-assembled.
Post by: nvektus on Apr 12, 2017 at 09:02 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161021_101054_800x449.jpg)
crossover for the center channel... fusion 8 alchemy.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170125_092231_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170125_113530_800x449.jpg)
Post by: nvektus on Apr 12, 2017 at 09:13 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161101_103942_800x449.jpg)
Post by: nvektus on Apr 12, 2017 at 09:18 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161101_103908_800x449.jpg)
Post by: nvektus on Apr 12, 2017 at 01:31 PM
enough clamps... use whatever :D
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161106_145639_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161106_175824_800x449.jpg)
Post by: nvektus on Apr 12, 2017 at 01:34 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170123_174440_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170123_181332_800x449.jpg)
Post by: nvektus on Apr 12, 2017 at 01:41 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161223_173403_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161224_090813_800x449.jpg)
Post by: nvektus on Apr 13, 2017 at 06:38 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161026_155924_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161026_155948_449x800.jpg)
Post by: nvektus on Apr 13, 2017 at 06:42 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161108_170739_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161108_170652_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161119_073524_449x800.jpg)
Post by: shoktongxxx on Apr 13, 2017 at 10:51 PM
Post by: nvektus on Apr 14, 2017 at 09:03 AM
wow! nice HT.. :)
thank you sir :-)
Post by: nvektus on Apr 14, 2017 at 09:29 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161119_073432_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161119_073606_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170124_124752_449x800_1.jpg)
Post by: JeromeA on Apr 14, 2017 at 11:15 PM
Post by: Nelson de Leon on Apr 15, 2017 at 12:57 AM
Post by: ndotcom on Apr 15, 2017 at 10:08 AM
Is this local or abroad?
Post by: comet on Apr 15, 2017 at 10:15 AM
Post by: nvektus on Apr 15, 2017 at 10:40 AM
sir congrats. lupit!
Thank you sir :-)
Post by: nvektus on Apr 15, 2017 at 10:59 AM
Ang ganda and ang sarap naman niyan sir. Last 2010 when I built my HT room there were still limited options for in-wall and in-ceiling speakers kaya I had to improvise for the hidden speakers..
thank you sir Nelson. the volt 6 are coaxial speakers so they work well in-walls and great for surrounds and atmos. the lcr's with the subs are setup behind the front false wall so i don't know if i would still call that in-wall?
Post by: nvektus on Apr 15, 2017 at 11:00 AM
Nice builds and flat packs. Congrats!
Is this local or abroad?
Thank you sir...local lang!
Post by: nvektus on Apr 15, 2017 at 11:02 AM
Anong placement mo for the atmos surrounds? In ceiling yung DIY speakers?
in-ceiling ang atmos and inside the columns naman surrounds sir.
Post by: bongchillog on Apr 15, 2017 at 11:18 AM
Sent from my iPhone using Tapatalk
Post by: nvektus on Apr 15, 2017 at 12:02 PM
Ang ganda siguro neto diy lahat.
Sent from my iPhone using Tapatalk
thank you sir! enjoying the ht with the zidoo player i bought from you. i got it setup to launch kodi from startup. it's been years since i used xbmc... i switched to plex back then dahil mas madali i-setup. but now mukhang madali na isetup xbmc hindi kagaya noon na mabusisi.
Post by: nvektus on Apr 15, 2017 at 12:36 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161120_110039_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161120_110204_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161122_130004_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161126_111917_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161126_111929_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161127_101235_449x800.jpg)
you could see the huge waveguide and compression driver on top of the fusion 12.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161127_101410_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170125_161917_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161230_090643_800x449.jpg)
one of the 15" subwoofer driver. also installed rubber feet and handles.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161231_101328_449x800.jpg)
Post by: crazyhog on Apr 15, 2017 at 12:44 PM
Sent from my iPhone using Tapatalk
Post by: ndotcom on Apr 15, 2017 at 08:22 PM
Thank you sir...local lang!
Locally available mga flatpacks at kits sir?
Post by: bongchillog on Apr 16, 2017 at 02:21 AM
thank you sir! enjoying the ht with the zidoo player i bought from you. i got it setup to launch kodi from startup. it's been years since i used xbmc... i switched to plex back then dahil mas madali i-setup. but now mukhang madali na isetup xbmc hindi kagaya noon na mabusisi.
Ikaw pala to sir Joel. Sarap makiaudition neto pag natapos. Cavite pala. Hehe
Sent from my iPhone using Tapatalk
Post by: nvektus on Apr 16, 2017 at 09:35 AM
how to be u sir :)... ganda ng diy mo sir.
Sent from my iPhone using Tapatalk
thank you sir :-)
Post by: nvektus on Apr 16, 2017 at 09:40 AM
Locally available mga flatpacks at kits sir?
i bought the kits and flatpacks online from a US company sir. pina-ship ko na lang sa relatives ko to pinas. you can also use one of those shipping companies like forex or pobox.
Post by: nvektus on Apr 16, 2017 at 10:26 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161120_164011_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161120_164033_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161120_164128_449x800.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161130_125634_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170129_084807_800x449.jpg)
Post by: Nelson de Leon on Apr 19, 2017 at 09:38 AM
Sent from my ASUS_Z012D using Tapatalk
Post by: nvektus on Apr 19, 2017 at 03:45 PM
Sir yun surround speakers are full range speakers?
Sent from my ASUS_Z012D using Tapatalk
2-way sya sir. yung tweeter nya ay compression driver attached on the back of the woofer. may butas sa gitna yung magnet ng woofer at doon nakalusot yung tweeter and fires through the center of the woofer.
Post by: Nelson de Leon on Apr 19, 2017 at 07:53 PM
2-way sya sir. yung tweeter nya ay compression driver attached on the back of the woofer. may butas sa gitna yung magnet ng woofer at doon nakalusot yung tweeter and fires through the center of the woofer.Looks like an awesome project sir. If possible sir, can you post pictures of how the tweeter is installed and its location relevant to the front of the woofer. Bale nasa likod (hidden) siya ng dust cap?
Sent from my ASUS_Z012D using Tapatalk
Post by: Nelson de Leon on Apr 19, 2017 at 08:10 PM
https://docs.google.com/document/d/1lCYL5AEI_w2rHppwb4Pw49uFXaryoll2zGZ4_Tuv6rs/mobilebasic
Sent from my ASUS_Z012D using Tapatalk
Post by: nvektus on Apr 20, 2017 at 08:45 AM
Eto ba yun sir:
https://docs.google.com/document/d/1lCYL5AEI_w2rHppwb4Pw49uFXaryoll2zGZ4_Tuv6rs/mobilebasic
Sent from my ASUS_Z012D using Tapatalk
that's exactly the same speaker sir nelson. behind the acoustically transparent dust cap is a small waveguide or horn for the compression driver.
Post by: ricky on Apr 20, 2017 at 11:29 AM
Btw acoustically transparent screen ba use mo?
Post by: Nelson de Leon on Apr 20, 2017 at 11:31 AM
Sent from my ASUS_Z012D using Tapatalk
Post by: nvektus on Apr 20, 2017 at 01:23 PM
Yan ang passion! Congrats in advance.
Btw acoustically transparent screen ba use mo?
thank you sir. no AT screen, only elite screens material... cinewhite yata model?
Post by: nvektus on Apr 20, 2017 at 01:34 PM
Looks promising with the acoustically transparent dustcap! Judging from the FR from the site, mukhang maayos siya even for stereo listening.
Sent from my ASUS_Z012D using Tapatalk
you're right sir, these little speakers can go loud and the sound is super clear. i had it setup in stereo while bench testing and it produced more bass than i was expecting for its size. my room is small and these speakers are more than enough for surround and atmos duty.
Post by: nvektus on Apr 20, 2017 at 03:18 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161130_125704_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161130_125716_800x449.jpg)
this is right and rear side of the ceiling. the columns which will house the rear surrounds are partially visible. you could
also see the speaker box for the right rear atmos.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161130_125733_800x449.jpg)
right side of the ceiling, you could see the 2 right atmos speaker boxes.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161130_125747_800x449.jpg)
installed the divider boxes for the cove ceiling. dividers will be filled with rockwool.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161203_134852_800x449.jpg)
i used a mixture of blanket and board type 80kg rockwool.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161203_134926_800x449.jpg)
Post by: nvektus on Apr 20, 2017 at 03:50 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161204_105119_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161203_134902_800x449.jpg)
Post by: nvektus on Apr 24, 2017 at 10:52 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161124_101901_800x449.jpg)
Post by: nvektus on Apr 24, 2017 at 11:08 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161204_105214_449x800.jpg)
Post by: nvektus on Apr 24, 2017 at 11:22 AM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161207_073702_800x449.jpg)
left out the front 3 sections of the cove ceiling... cloud traps will be installed there later.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161207_073743_800x449.jpg)
bass traps on the front wall corner top.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161209_154316_800x449.jpg)
crown moldings installed in the cove ceilings.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161209_084935_800x449.jpg)
Post by: nvektus on Apr 24, 2017 at 12:14 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161220_073210_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161220_073322_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161220_073259_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161220_073220_800x449.jpg)
front of the avr rack carpentry ready for painting. also fist coat of stain was applied to the lower level crown and center mouldings, and all 6 columns. stain's color is not accurate due to crappy cp am.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161231_100016_449x800.jpg)
Post by: nvektus on Apr 24, 2017 at 12:48 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20161216_154941_449x800.jpg)
Post by: comet on Apr 24, 2017 at 01:18 PM
Post by: nvektus on Apr 24, 2017 at 03:03 PM
galing nyo sir! paano nyo ginawa mechanism for the masking system?
sir comet, in the pic below you'll see where i marked a slider with a circle... i have 4 of these sliders situated on the sides of the screen. 2 on top and 2 on the bottom and they slide freely on the surface of the wall. the 2 sliders on top are connected by a 1x3 piece of wood horizontally across the screen, the bottom sliders are also connected with each other the same way. on the sides of the screen, the top and bottom sliders are connected by a wire rope with a pulley right above the top sliders so when the bottom sliders move up, the top sliders will move down and vice versa. this directs the movements of the 2 pieces of 1x3 wood across the screen...the bottom sliders move up and the screen becomes 2.35, and when the bottom sliders move down it shows the whole screen which is 16:9. to make the sliders move an actuator motor is connected to the bottom sliders. medyo nakakalito explain sir but it works.
the relay board in combination with a couple of limit switches tells the actuator whether it needs to move up or down. and another relay that has an infrared capability is also connected to the relay board and allows me to control the whole thing with a remote.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/masking_800x693.jpg)
Post by: shoktongxxx on Apr 24, 2017 at 10:20 PM
Post by: praktikal on Apr 24, 2017 at 10:53 PM
Post by: comet on Apr 24, 2017 at 11:04 PM
sir comet, in the pic below you'll see where i marked a slider with a circle... i have 4 of these sliders situated on the sides of the screen. 2 on top and 2 on the bottom and they slide freely on the surface of the wall. the 2 sliders on top are connected by a 1x3 piece of wood horizontally across the screen, the bottom sliders are also connected with each other the same way. on the sides of the screen, the top and bottom sliders are connected by a wire rope with a pulley right above the top sliders so when the bottom sliders move up, the top sliders will move down and vice versa. this directs the movements of the 2 pieces of 1x3 wood across the screen...the bottom sliders move up and the screen becomes 2.35, and when the bottom sliders move down it shows the whole screen which is 16:9. to make the sliders move an actuator motor is connected to the bottom sliders. medyo nakakalito explain sir but it works.
the relay board in combination with a couple of limit switches tells the actuator whether it needs to move up or down. and another relay that has an infrared capability is also connected to the relay board and allows me to control the whole thing with a remote.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/masking_800x693.jpg)
Nice! galing din nung circuitry sir for the remote!
Post by: nvektus on Apr 25, 2017 at 09:20 AM
Nice! galing din nung circuitry sir for the remote!
credit goes to the site below where i copied the circuit for my relay board sir.
http://www.robmeyerproductions.com/bows.html (http://www.robmeyerproductions.com/bows.html)
Post by: nvektus on Apr 25, 2017 at 04:12 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170129_084856_800x449_1.jpg)
first reflection point side walls. diy rpg bad panels... it's suppose to do both, diffuser and absorber.
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170129_085124_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170129_085350_800x449.jpg)
front wall starting to shape up :)
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/IMG_20170129_090145_800x449.jpg)
Post by: nvektus on May 08, 2017 at 04:45 PM
(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_20170508_101216_449x800.jpg)(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_20170508_101324_800x449.jpg)
finished pictures. with the cove lights on... looks like ceiling is on some kind of blue fire :)
(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_20170215_172305_798x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_20170425_093449_798x449.jpg)
universal remote control. i'm using a cheap 7" tablet to control everything through irule. very powerful and customizable... it's a work in progress since i haven't quite figured out all the features yet.
(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_20170508_101014_800x449.jpg)
(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/remotet_469x800.jpg)
seats, pin lights, screen, etc...
(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_3559.jpg)(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_3557.jpg)(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_3548.jpg)(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/IMG_3547.jpg)(http://i476.photobucket.com/albums/rr122/nvektus/new%20movie%20rm/front.jpg)
Post by: crazyhog on May 08, 2017 at 05:02 PM
Sir, curious ako s masking, pwd kayo maka gawa ng video on how it works for different format.. TiA.
Sent from my iPhone using Tapatalk
Post by: nvektus on May 08, 2017 at 05:06 PM
http://youtu.be/ZwUZXVYFklM
Post by: nvektus on May 08, 2017 at 05:12 PM
(http://i476.photobucket.com/albums/rr122/nvektus/online%20pics/server.jpg)
Post by: at_sunset_blvd on May 08, 2017 at 07:33 PM
Post by: Nelson de Leon on May 08, 2017 at 07:48 PM
here's a video of the screen in action. this is a 128"(16:9) fixed framed screen that goes up to reveal the LED TV and down to cover the TV again. also shows the masking system working. pardon the background noise, my ht is right next to the kitchen.Nakita ko sa previous picture lasing na si Ted.
http://youtu.be/ZwUZXVYFklM
Sir if that's a fixed frame then meron siyang spare area sa itaas as to where the hide the fixed frame?
Sent from my ASUS_Z012D using Tapatalk
Post by: shoktongxxx on May 08, 2017 at 09:58 PM
Post by: comet on May 08, 2017 at 10:17 PM
Post by: nvektus on May 09, 2017 at 09:01 AM
WoW, Thats one great DIY server there Sir :o
thank you sir!
Post by: nvektus on May 09, 2017 at 09:04 AM
Nakita ko sa previous picture lasing na si Ted.
Sir if that's a fixed frame then meron siyang spare area sa itaas as to where the hide the fixed frame?
Sent from my ASUS_Z012D using Tapatalk
meron sir, screen goes into the attic. lucky enough not to hit any trusses.
Post by: nvektus on May 09, 2017 at 09:46 AM
oo nga sir anong mechanism yung pag-akyat nung fixed frame?
i used a pulley and wire rope to pull the screen up/down sir. the screen has guides on each side para stable and wire rope is connected on top center of the screen by a u bolt. the other end of a wire rope is connected to a chain that is also connected to a sprocket which is also connected to a 12v gear motor. nakakalito ba sir, hehe. parang sa bike lang na naka-loop yung chain pero in this case limited lang run ng chain just to simulate up and down, depends on the direction of the gear motor which is also wired to the same relay board for the masking system para isang power supply lang ang gamit.
this would have been simpler if i just used an automatic roll-up screen but the problem with those is the wave it develops overtime. tensioned screen would have been the best but i couldn't find one locally. importing one with that size wasn't logical to me. so diy route seemed to be the most practical way.
Post by: Oldboyracer on May 09, 2017 at 09:41 PM
Post by: comet on May 09, 2017 at 10:07 PM
Post by: crazyhog on May 09, 2017 at 11:58 PM
salamat sir sa inputs inspiring yung ht room mo.
Pa OT: Same thing soon s set up mo doc? Hehe.. musta?
Sent from my iPhone using Tapatalk
Post by: nvektus on May 10, 2017 at 05:08 PM
Very nicely done.
likewise sir ;) have you installed the new audyssey mobile app for your 7703? great choice on your pre-pro!
Post by: nvektus on May 10, 2017 at 05:10 PM
salamat sir sa inputs inspiring yung ht room mo.
thank you sir! just let me know if i could help more with your build.
Post by: Oldboyracer on May 12, 2017 at 05:35 PM
likewise sir ;) have you installed the new audyssey mobile app for your 7703? great choice on your pre-pro!
Thanks for the like, no I haven't installed the app yet, I may wait until I get a tablet, I find mob. phones a bit too small. I'm busy at the moment trying to learn how to drive the new gears so taking everything slowly :)