Topic: Acer H5360 HD 3D

[e_none]

mga sir compatible kaya eto sa h5360 using our nvidia equipped HTPC's?



Compete in true PlayStation® stereoscopic 3D.

Essential equipment for your 3D gaming experience, the universal* PlayStation® 3D Glasses fully immerse you in the heat of gameplay. With best-in-class ACTIVE 3D quality and built-in USB rechargeable batteries, the intensity never stops.

* Compatible with Sony, Samsung, Panasonic, Mitsubishi, Toshiba, and Sharp ACTIVE Shutter 3D ready displays that use IR emitters
Product Overview:
Best-in-class ACTIVE 3D quality delivers full HD playback without the resolution loss of PASSIVE 3D
Fully immersive vision universally compatible with ACTIVE 3D TVs
Lightweight, stylish design allows you to focus on the game with maximum comfort
Minimizes 3D crosstalk and reduces “ghosting” effects
Built-in rechargeable batteries let you play up to 30 hours without interruption
Optimized to sync seamlessly with the PlayStation® 3D Display
Exclusively supports SimulView™ technology

[eksi]

You might be interested...

H5360 plus Optoma 3DXL and 2 pairs 3D DLP Glasses on sale
I posted it in the marketplace

Thanks

[titor]

if i source this pj in the states and something happens to it will the service center accept it for repairs?

[dts-HD 3D]

Local service center will accept it but might charge you for any repairs.
Its best to inquire before buying if the unit comes with international warranty.

[bobtimo]

sir ano gamit mo 3d player and glasses?

Sorry, medyo nawala sa forum ng matagal ... player, I'm happy with the stock player ng nvidia. 3D glasses, yung binibenta ng 3dtv sa amazon or sa ebay. $64 per 2 pcs, so lalabas na $32 each. I like them better than the nvidia, coz it'll work on reflected IR signal, unlike sa nvidia that the emitter needs to be in front of you. nakailang USB extender cables na ako, walang gumana. so i have 2 nvidia glasses that have no use, and 7 of the 3dtv's.

[bobtimo]

Parang ang hirap ng position sa panonood tapos malapit pa sa screen na malaki.

I do this only when watching 3D, medyo imax ang dating, so immersive with the viewer up close, almost filling your vision with the screen. But I back out when viewing 2D content, mga 4-5 meters away from screen. The seat is comfortable, but the seat apparently is too big for these little kids, kaya sila na rin nag decide to watch that way. :-)

[≧◉◡◉≦xrampage≧◉◡◉≦]

sir ano gamit mo 3d player and glasses?

Di ako naka DLP PJ naka epson ako i use the panasonic 3D glasses. 

[bobtimo]

Uh-oh ... my H5360 now has the dreaded white dots aka stuck pixels, less than 700 hours on the bulb. Started w/ one dot a few days ago, 2 yesterday, tonight jumped to 6. Progressing geometrically, it seems.

Time to save up and scout for a DMD chip replacement. In the $150+ range on ebay. I'll repair it myself, thanks to the service manual floating around. There's also a tutorial on DMD chip replacement on an Optoma on youtube, which should be similar.

[emer090765]

mga sir/s any idea how much is the bulb for our H5360?

[titor]

ang mura na pala neto ngayon.

http://www.villman.com/Product-Detail/Acer_H5360_Projector

[DTNS]

ang mura na pala neto ngayon.

http://www.villman.com/Product-Detail/Acer_H5360_Projector

true. but I suggest skipping this model and heading straight for the Full HD H6510BD.

[titor]

true. but I suggest skipping this model and heading straight for the Full HD H6510BD.

I pulled the trigger on this one last week. I went this route over the 6510 because this is my 1st PJ. I have no idea as to how it would look like since this would be a living room set up. And I didn't get approval from the department of finance. Wifey was against the idea and was very skeptical of using a PJ over a tv. Her previous job let's her use the a PJ almost daily for pezos and videos and she doesnt like the PQ. My convincing powers had no effect that a business PJ is different from an HT pj.

Anyway after setting it up with a temporary screen using white cartolina bluetacked to the wall I was blown away even with some ambient light it was awesome. And this was just about 72" since di ko pa na set up at wala pa akong long HDMI cable and ceiling mount. Now my wife is a believer. Her jaws dropped when I played Avatar. So far I'm enjoying it.     

[DTNS]

I pulled the trigger on this one last week. I went this route over the 6510 because this is my 1st PJ. I have no idea as to how it would look like since this would be a living room set up. And I didn't get approval from the department of finance. Wifey was against the idea and was very skeptical of using a PJ over a tv. Her previous job let's her use the a PJ almost daily for pezos and videos and she doesnt like the PQ. My convincing powers had no effect that a business PJ is different from an HT pj.

Anyway after setting it up with a temporary screen using white cartolina bluetacked to the wall I was blown away even with some ambient light it was awesome. And this was just about 72" since di ko pa na set up at wala pa akong long HDMI cable and ceiling mount. Now my wife is a believer. Her jaws dropped when I played Avatar. So far I'm enjoying it.     

Congrats and welcome to the club!

[titor]

Ask ko lang. Where did u buy the mounting screws? My unit didn't have any and the universal mount I got was too short. If sa handyman/ace ano klase ginamit nyo.

Thanks

[erwin111]

After just above 2years from the time of purchase (around 1500hrs usage), bumigay na yung PJ ko na ito ..

just by powering up from standby, i heard a popping sound, then i didn't see the standby red led lit anymore.. i thought it was the lamp.. but when i pulled out the lamp module, it is still intact (looks like)..
then i felt the urge to tear down this PJ to check what really happened (out of warranty anyway).. it turns out that it might be the power supply unit.. i can see visible burnt marks on the power mosfet.. it looks like some arcing took place from the looks of it.. maybe moisture build up..

meron ba sa inyo mga bossing na nakapagpagawa na ng PJ power supply? mga magkano kaya?
anyway, ipapasok ko na rin sa service center ito, tignan ko kung ano sabihin na sira..

[marckd1]

Sir erwin111, same tayo ng nangyari. Two years na din ang PJ ko but 700 hrs lang ang usage. Hindi na din nag power on.

[praktikal]

Hala! tsk tsk...

[erwin111]

Sir erwin111, same tayo ng nangyari. Two years na din ang PJ ko but 700 hrs lang ang usage. Hindi na din nag power on.

sir, pinasok ko na sa service center sa may otis.. 2 years warranty pala ito.. sayang, kasi aug 2011 ko nabili ito, kakalapse lng.. bka less 2 years pa sa iyo, check mo yung date of purchase mo.. free naman daw yung diagnosis kung warranty lapsed, tapos kung papagawa ko, 800 yung labor.. sana power module lng talaga nasira at hindi nadamay yung mother board (or yung dlp chip).. kasi sabi nila mga 2000-3000 kung power supply unit lng.

[bobtimo]

Miss my H5360. Ordered DMD chip from Alibaba, but post office didn't deliver, the package lost somewhere. Glad Alibaba refunded me the money even if it's not their fault. Before I order again and use DHL or UPS, has anybody here done a DMD replacement with Acer? How much?

Tnx!

[bobtimo]

To all of you who want to replace the DMD by yourself after you see those dead / stuck pixels, it's doable if you already have opened a laptop and did a DIY repair. There's a repair manual floating around, easy enough to follow. I did my 2nd order at Alibaba last week, through DHL this time, but wondered why vendor hasn't shipped yet. Here's that DMD from my H5360, showing the part number. From the forums I read, as long as part# starts with 1272, it'll work.

[e_none]

kamusta na mga PJ nyo guys? mag 1 year na pala last post ko dito ibig sabihin 1 year na din ako wala PJ..
baka meron kayu nakatambak na jan H5360 d na narepair PJ ko e obsolete na daw sabi sa service center. need ko power suppy:)